J'ai trouvez ceci : jgn.superheros.fr/fr/
Vous pouvez importer votre itinéraire (de openrunner ou autre) et imprimer sur format (A0->A5)
C'est très bien fait, en effet, même un léger chevauchement est prévu entre les différentes feuilles.
Mais voici mon problème ; Je suis obligé de faire un "bloc" de feuilles A4 l'une à coté des autres sur le site. Par exemple, 3 feuilles en largeur sur 5 feuilles en longueur l'une à coté des autres.
Est-ce qu'il y aurait moyen de faire un cheminement de feuilles A4 de manière personnalisée et de tel sorte à ce que ces feuilles suivent seulement le tracé de mon parcours? Connaissez vous un autre site web peut-être? un autre logiciel? Une astuce?
Car actuellement, je suis obligé de faire un nettoyage et supprimer toutes les feuilles sur lesquelles mon parcours n'apparait pas.
avec un logiciel de mise en page type adobe ?
encore faut il avoir le logiciel !
bonne chance
claudio
Claudio de la Faverges.
Bonjour amis cyclotouristes, claude passionné de voyages à vélo favergien et défenseur du cycliste.
plus la carte bleue est foncée et plus le bagage est léger
en anglais "the more the card is blu the less the luggage is heavy"
Tu installes PDFcreator, pas besoin d'installer une version payante (dite AdFree), qui est une imprimante virtuelle qui crée un fichier pdf quand on lui demande d'imprimer.
J'ai testé ça :
Tu vas sur le site en question, tu cliques sur aperçu avant impression, les pages se chargent, quand elles sont chargées, tu cliques sur imprimer, et là tu devrais avoir le choix entre ton imprimante physique et PDFcreator, tu choisis ce logiciel, il va te créer un fichier PDF comprenant les pages que le site a affichées.
Tu enregistres (il te demande de le faire avant d'afficher le pdf via une boite comprenant nom, etc.) et le pdf s'affiche ensuite.
Tu auras intérêt à passer en mode d'affichage "pages continues" pour voir les pages que tu veux imprimer ou non en en faisant défiler plusieurs à la fois, et en lisant en bas le numéro de chaque page.
Puis tu imprimes, en choisissant de personnaliser les pages à imprimer, et en ne choisissant que celles qui t'intéressent, bien sûr puisque c'est le but de la manœuvre. Tu choisis ton imprimante physique cette fois, évidemment.
Ou bien, tu fermes PDFcreator et tu ouvres le pdf avec ton logiciel habituel, adobe reader ou autre et tu imprimes à partir de ce logiciel.
Je viens de tester (sans impression finale) et ça marche, mais ça prend du temps de tout charger si on a beaucoup de pages.
Openrunner et photofiltre ouverts
- sur openrunner je me place sur la partie qui m'intéresse /imprim écran
- sur photofiltre Edition / coller en tant qu'image
- Recadrer éventuellement (sélection/ image/recadrer)
- Imprimer/pleine page et pendant l'impression je retourne faire la page suivante sur openrunner
C'est ce que j'ai trouvé de plus rapide, s'il y a mieux je suis preneur
"Ne cherche pas à suivre les traces d'un autre, cherche plutôt à savoir ce qu'il cherchait."
Tu as l'outil de capture de windows (de base) qui te permet de selectionner la zone à copier, plus simple ;)
La boite de dialogue impression de windows (XP sp3 je précise...) propose 3 choix, Tout; Pages de -- à -- et Sélection.
Avec sélection, on n'arrive au mieux qu'à sélectionner 1 feuille, ou toutes, impossible de choisir telle ou telle, avec telles ou telles autres non successives.
Avec page de -- à --, on est obligé de faire par séries de pages successives.
Si le parcours comprend un rectangle de 12 sur 30 pages, avec juste une trace à imprimer de 35 pages environ sur 360, je pense qu'il faut donc faire cette méthode une vingtaine de fois. D'où la demande de Maxime, trouver un truc qui permette d'imprimer par exemple les feuilles 1 - 4 - 5 - 6 - 10 - 12 23 - 47 - 58 etc. sans avoir à bricoler en relançant 20 fois l'impression.
Si tu postes parce que as essayé et réussi une méthode qui permet de s'affranchir de cette façon d'imprimer, merci de nous expliquer la méthode.
Ha ben là je peux plus rien, ca fait un bout de temps que XP est plus suivant par windows ^^
Sinon 178 jules, tu utilises bien " outil capture d'ecran " ? Si oui, tu clics sur nouveau puis en maintenant le clic enfoncé, tu selectionne la zone à capturer. Comme ca, pas besoin de s’embêter à rogner les parties qui ne t'intéressent pas ;)
Mais enfin...ne faites pas de capture d'écran, il y a plus simple!
jgn.superheros.fr/fr/
-Importer votre parcours sur ce site, et vous pouvez même changer les fonds de carte.
-Ensuite, vous pouvez choisir la taille de vos feuilles (A4 par exemple) Ensuite, agrandissez la zone à imprimer en ajoutant des pages les unes à cotés des autres. Centrer votre trajet comme il vous plait. (choisissez également l'échelle)
-Cliquez ensuite sur "aperçu avant l'impression", un autre onglet apparait avec l'ensemble des feuilles contenant le cadre de sélection que vous venez d'effectuer
-Ensuite allez dans propriété de votre navigateur, (ou ailleurs en fonction des navigateurs internet)
-Cliquez sur imprimer, ensuite sélectionner "imprimer en PDF"
Et hop vous avez toutes vos cartes qui sont générées automatiquement.
Mon problème est que sur ce site, pour modifier la dimension (nombre de feuilles l'une à coté des autres) on peut seulement faire "x feuilles en longueur et x feuilles en largeur".
J'aimerais pourvoir personnaliser et agencer les feuilles pour qu'elles suivent directement mon parcours sans avoir de feuille de surplus à coté (pour éviter cette suppression de feuilles sous pdf)
Mon problème est que sur ce site, pour modifier la dimension (nombre de feuilles l'une à coté des autres) on peut seulement faire "x feuilles en longueur et x feuilles en largeur".
J'aimerais pourvoir personnaliser et agencer les feuilles pour qu'elles suivent directement mon parcours sans avoir de feuille de surplus à coté (pour éviter cette suppression de feuilles sous pdf)
Justement, c'est une solution à ce problème que je te proposais dans mon message plus haut, passer par PdfCreator qui va générer un fichier pdf sur lequel on peut personnaliser les pages à imprimer après avoir noté celles qu'il nous faut. C'est un peu du bricolage, certes.
Et les fonctions du navigateur sont indépendantes de l'OS, firefox pour xp et firefox pour win 10 ou pour Ubuntu ou autres auront exactement les mêmes menus et le même rendu à l'écran, faut-il le rappeler.
La plus efficace, je ne sais pas, mais disons qu'elle fonctionne.
Je viens de refaire la manip : j'ai choisi une trace GPS depuis openrunner, je l'exporte en choisissant GPX track et en copiant le lien, puis je l'importe dans jgn, en changeant au passage la couleur par défaut, du rouge très similaire à certaines routes sur les cartes ign, en passant sur du bleu. J'ai réglé l'épaisseur du trait sur 6, puis je choisis aperçu avant impression. Quand toutes les pages sont chargées, j'imprime avec pdfcreator, je nomme le fichier pdf, quand il est ouvert j'affiche en tant que "pages continues" puis je clique sur l'impression. C'est là que je choisis "personnalisée" et que j'entre la série de pages que je veux imprimer, sous cette forme : 1,2,3,6,7,9,12, par exemple. Et pdf creator imprime seulement ce qui a été sélectionné.
À noter qu'une fois le fichier pdf créé, on peut l'ouvrir avec adobe reader qui permet aussi de ne choisir que les pages à imprimer.
Je pense donc que le créateur du site jgn devrait proposer l'enregistrement de la série de cartes sous fichier pdf qui plus facile à gérer pour l'impression. Je lui ai fait part de cette requête.
Je viens d'acheter un Oregon 450 et la carte IGN Topo France ; déjà la prise en main du GPS n'est pas d'une simplicité exemplaire! Mais alors, pour ce qui est…
Qui peut nous renseigner sur le circuit au Costa Rica de Nouvelles Frontières page 98 du catalogue "les voyages Amériques & Caraïbes" Printemps-été 2OO8. Nous…
Il y a de multiples façons de préparer son parcours à vélo, sur routes ou sur chemins, pour découvrir des endroits insoupçonnés, même tout près de chez soi.…
Je viens d'acheter mon 1er android, je cherche une application qui permettrai de tracer sur une carte (google map) sa route, de la memoriser, d'utiliser le GPS…
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August!
Virginie
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires.
I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time).
I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral.
I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough?
And one last question: white gas stove or can I get by with my gas stove?
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam.
My question is about getting back to Nantes.
Do any of you know what the best return option might be? I’d love to hear about your experiences.
I saw that FlixBus doesn’t take bikes.
By train, I think it’s possible but would involve multiple local trains.
We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance!
Have a great evening
Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
I’m planning to build a new touring bike.
I want to prioritize lightness.
That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads.
The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper.
I’m particularly considering the RockShox Rudy Ultimate XPLR fork.
Unlike MTB forks, its travel is short: either 30 mm or 40 mm.
It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring.
And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear.
More generally, how reliable are these kinds of forks?
Hi everyone,
I wanted to share with you the incredible feat my friend José, who’s 72 years old, is currently undertaking. He left Auterive near Toulouse on Monday, May 18, 2026, on his non-electric bike, heading for the North Cape in Norway!
You can follow his route on the link below—he’s currently in Sweden:
https://thierry-thomas.travelmap.net/jose-de-toulouse-a-nord-cap-2026
You can zoom in on the map and click on each stopover town to see the photos
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.
It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.
One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.
We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.
Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
Hi there, we’re a group of 4 cyclists looking to get from Treviso in Italy to Munich with our 4 non-folding bikes. It seems complicated! Are there any solutions? Thanks so much.
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed
story being posted online soon
1100 km in 11 days
beautiful and varied regions
Hi there, we’re planning a Munich to Venice bike trip at the end of June 2026. Getting back from Venice to Toulouse by train with 4 bikes isn’t straightforward. What return options have others who’ve done this trip chosen? Any tips or great deals would be much appreciated. Thanks a bunch! !
Hi everyone,
Happy owner of a Pegasus Estremo bike with a Rohloff hub, which is giving me trouble with the SF11-NCX-FT-E-LITE 700C TS 300/0 fork (serial number TD01329060). It’s starting to show its age, and I’d like to repair it to extend the life of my beloved bike.
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Hi, I'd like to know if anyone has done this route recently or has reliable info.
Does the track exist, and most importantly, is there sand (for biking)?
Any info is welcome.
Cheers,
diego ambilobe: mangaoka, manondro, ramena
vohemar sambava: masondrono, tanambao
Hi there,
New to bike touring,
I’d love to start with a section of the Via Rhona to explore and share (route to be decided).
Looking forward to exchanging tips!
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
A big thank you to Lazarou for all the info you share in this forum!
I'm passionate about Morocco, which I cycled through back in 2009.
Last year, my wife and I explored the High Atlas by tandem. Completely smitten, we're heading back in April (Anti Atlas) and May (High and Middle Atlas), still on our tandem.
Do you have any info on the track between Amezri and Ali Ait Nito? Are the river crossings in the Tessaout still there? It's not easy to navigate with a loaded tandem... especially if the river level is high due to this year's heavy snowmelt!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
Claudio specializes in the route of the Savoie lakes
Here are his travels
Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné
Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way
Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place
Rural and quite peaceful
A road cycling route created by Serge B...
Tout d'abord... bonne année ! De belles routes à vous en 2017 !
Je voyage depuis quelques années avec un VTT de très bonne qualité mais équipé de freins à disques hydrauliques. Je vis (pédale) avec l'inquiétude d'avoir une panne (fuite, bulle d'air, chaleur qui fait que le liquide...). Mon vélociste me dit qu'il est impossible de les changer pour des V brakes.
Qu'en pensez-vous ? Est-ce que je prends un gros risque à continuer (seule) avec ces freins ? D'avance je vous remercie pour vos bonnes idées.
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025.
It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border.
We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
Hi there,
I’m planning the route to cycle from Lille to Nordkapp with my partner.
Duration: 3 months, from May 1st to July 31st, 2026.
In the attached details below, I need to add some "non-riding" days (rest days, basically).
So I’m looking to "shorten" the trip by taking ferries or trains for some stretches. Which areas could I skip?
Thanks in advance for your great tips.
Have a good evening.
https://www.komoot.com/fr-fr/collection/4023980/-lille-cap-nord-1er-mai-au-31-juillet-2026?ref=collection
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure!
Thanks in advance.
Hi, has anyone recently bought Primus or Butagaz gas, possibly puncture-style, in Dubrovnik or the surrounding area? Same question for Albania... thanks. aichatou
Just a few words about the loop I did by bike in Yunnan.
Entry and exit
I entered China through the Sino-Vietnamese border crossing at Lào Cai / Hekou under the 30-day visa exemption currently available to French nationals and others.
The process was simple and quick. A Chinese police officer even helped me complete my electronic pre-registration at a computer kiosk. I wasn’t aware this formality was required—it’s similar to Thailand’s TM6.
No issues with the bike.
I left the country via the Sino-Laotian border crossing at Mohan / Boten.
The atmosphere was a bit chaotic there, but again, no problems with the bike.
The timing
I visited Yunnan in February 2026.
Weather-wise, at higher altitudes (between 1,500 and 2,000 meters), it was around ten degrees at night and in the mornings, and around twenty degrees at the hottest part of the day.
I had two days of rain, so I took the bus to keep moving. Otherwise, clear blue skies.
Culturally, Chinese New Year fell on February 17th (and the 15 days following), right in the middle of my trip. Because of this, my take on the traffic might be off.
Accommodation and food
I always found a hotel to stay in for prices ranging from 8 to 15 €. Except in Kunming (the capital), where many hotels were fully booked (Chinese New Year). I ended up at a 100 € hotel with great value for money.
A bowl of noodles costs about 1.5 € on average.
Onboard electronics
Since my smartphone doesn’t support eSIMs, I subscribed to a China plan with my carrier. Otherwise, for much cheaper, Alipay offers eSIMs for foreigners that allow access to services usually blocked for Chinese users (WhatsApp, Facebook, etc.).
An internet connection is essential for paying with Alipay or WeChat, as this payment method is widespread.
I only managed to use Alipay.
Either way, always carry cash because sometimes there’s no signal, or the merchant only accepts WeChat.
Also, it’s best to bring a power adapter when you arrive rather than struggling to find one.
Traffic and roads
The Chinese aren’t reckless drivers. They follow traffic rules and watch out for cyclists. This is slightly less true in Xishuangbanna (the region bordering Myanmar and Laos).
In urban areas, there are almost always wide bike lanes, separated from other roads, where bikes, electric mini-scooters, and scooters share the space pretty harmoniously.
The roads are in great condition, and traffic is generally manageable—even light—except for one stretch (Eshan -> Yangwu).
Most traffic is absorbed by expressways, China’s equivalent of highways: toll roads that are off-limits to slow vehicles.
You’re never far from these expressways; sometimes you even ride alongside them, which can be noisy at times.
The climbs are usually reasonable, around 5% to 6%. From what I remember, the steepest section was between Menglun and Mengla, with gradients of 8% to 10%, sometimes more.
Riding at these altitudes—though modest—took a bit of getting used to.
The route
I didn’t plan anything in advance. My only goal was to reach Kunming. I don’t know why, but just hearing the name of that city, like Yunnan, always felt dreamy to me.
Hi! I’m planning to visit the Stockholm Archipelago by bike in early April.
Do you know if the boats will be running between the different islands at that time of year? For those who’ve already been, all your tips and recommendations are welcome—accommodation, etc. Also, do you know where I can rent a bike in Stockholm? Thanks so much in advance for your help!
Hello there, pedal-powered Young Boys!
Claudio (still from Faverges)
dreaming about a cycling getaway in Italy from Faverges (train all the way to Turin)
from Turin down to Venice along the Po River and back via the Padana (Alta Italia da attraversare – Northern Italy to cross)
The tricky part is getting from Chioggia to Venice.
I read it’s possible by hopping on a boat from island to island,
but it sounds a bit stressful.
Has anyone already tackled this route?
I’m currently looking for a bike to do my first bike trip across France, with the ultimate goal of cycling through Latin America. I’ve got a lot of questions and I’d love to hear if you have any answers or advice to share.
First off, I’ve been through this before with hiking. I want to get top-quality gear right away. When I started hiking, I ended up buying everything three times—first beginner gear, then intermediate, then expert, etc.
For biking, I’d prefer to skip that process and invest right now in a bike that could ideally handle Latin America.
I’ve set a total max budget of around 5000 € (roughly 4000–4500 € for the bike and the rest for accessories: panniers, helmet, cycling shorts, etc.).
So, I’ve got quite a few questions:
* I’ve read in several places that some people recommend buying the bike directly in Latin America. Since I need a first bike to train in Europe, would it be better to buy an entry-level bike in France (and sell it before the big departure)? Or is it preferable to start right away with my final bike to get used to it? Is buying it there just to save a bit of money?
* For a long-term trip (around six months) in Latin America, is it better to go for a gravel bike or a mountain bike?
* Should I buy a new bike or a refurbished one? Even more so given that I’m planning a long trip—could a refurbished bike end up causing more breakdowns?
If you have any advice on models, technical features to prioritize, or recommended sellers or resellers, I’d love to hear it. I’m a total beginner—I’ve only just started watching videos and reading up on the subject, and all the technical specs are new to me!
Calling all travelers.
We’ll be landing at Lyon Airport and want to bike to La Verpillière train station (with panniers and camping gear, etc.) to catch a TER to Voreppe.
What’s the safest route for this bike trip?
Thanks in advance
hi,
I'm planning a recumbent bike trip from the Pyrenees to Greece. On the EuroVelo 8 route, it doesn't specify the path through the Alps.
Are there any experienced cyclists here who can tell me where they go to avoid climbing too high?
Also, is there another traveler/bike forum better suited for broadening the responses?
thanks