in Thèmes › Voyager en camping-car
Converting a heavy-duty bus/coach/truck into a motorhome (page 101 of 161)
Discussion started by Patrick26 on 2004-06-14
3213 replies
This thread has been translated into English.
Converting a heavy-duty truck into a motorhome (bus/coach/truck)
GX47 · 2007-01-14 · Message 2001 of 3214
Hi OdFrance,
No, I’m in Sarthe, 30 km from Angers (on your route), not in Loire-Atlantique.
And what I think about it... I’m not a difficult guy, contrary to appearances—almost anything works for me. 😏
You mentioned windows in a previous post. Yeah, windows are a big issue, which is why a lot of people panel their buses for insulation. Windows trap heat in the summer and cold in the winter.
My bus isn’t insulated either, and it doesn’t have auxiliary heating—😏 we’re used to roughing it in the entertainment world😛. Actually, I’m the odd one out on the forum—the bus was for work, not comfort. Though I *did* install a heater once in February, and thank goodness—I was in the snow🤪. It’s beautiful waking up to that through the roof hatches🙂, with a runny nose, warm feet under the duvet, and frozen ears😏. Pure bliss...
I’m going solo on this, but the easiest option might be a "Caisse" truck—it’s simple to insulate if you’ve got something to attach to. The downside? Ladder-style steps for every entry/exit, and no passage between the cab and living space. You’d have to compare—when I’m in this situation, I make a comparison chart.
GX47
Converting a heavy-duty camper van from a bus/coach/truck
Piccin · 2007-01-14 · Message 2002 of 3214
I just have two small things to say that are my own opinion: why aren’t there any photos of your interior? I’ve been browsing listings and posts for quite a while, and a bus in good condition usually sells within a few weeks. If that’s not the case, I simply think it’s not the right price.
I’m also surprised you said someone sharing their point of view is "drooling". Come on, let’s stay courteous! I think it’d be better if you showed the result—what you’ve accomplished and what you’re proud of—with explanatory photos instead of arguing endlessly with words and posts.
Fabrice.
Converting a heavy-duty camper from a bus/coach/truck
Kersode · 2007-01-14 · Message 2003 of 3214
Hi Patrick, and happy New Year to you, to those who keep this forum alive, and to all the others like me who, for now, take more information than they contribute after a long absence due to home renovation work that still isn’t finished. I’m still refining my project.
The decision’s been made to strip out the rear of the bus, much like yours, but since it’s an FR1, the body is supposedly aluminum. So the question is: what type of sheet metal should I use to block off the windows—aluminum, galvanized steel, or maybe polyester?
Another question: how can I use the rear door when parked? Since it’ll be for family use, the kids will definitely come in through that door. It operates on compressed air—what’s the simplest way to handle that?
See you soon,
JLC
Converting a heavy-duty camper from a bus/coach/truck
GX47 · 2007-01-14 · Message 2004 of 3214
🙁 forget the vintage registration card 🏴☠️
For the rest, it depends on what you’ll use it for. We have the same setup—I was preparing a "9-seater utility/living truck" file, and the DRIRE + Heuliez guided me toward "motorhome" because the category matching my request didn’t exist. I had to build the file from scratch, have DRIRE review it, and then they’d create an official homologation file based on that. They estimated it’d take 2 years—you can guess why I made my choice (though they were genuinely interested in the project).
If you want a living space, go for motorhome. If you just need to transport gear, go for a heavy goods vehicle (HGV). But check carefully how many seats they’ll authorize for the HGV—normally, you’ll end up in the "deep cab" category, which means seatbelts are mandatory (I have a 2006 file). Even for motorhomes, the rules are changing (I heard something about September ’07 on TV, and another regulation was announced for January ’08 about no longer allowing two kids under 10 per seat).
Did you measure the doors and your gear and test loading/unloading in real or near-real conditions? I did, and I gave up. I switched to looking for something with a wide rear opening until I found one already fitted. Because bus doors—unless they’re double-leaf (4 panels)—aren’t wide enough 😠. And unfortunately, 4-panel doors are usually on urban buses limited to 50–70 km/h 😠.
There was a Saviem bus with a MAN engine and rear opening recently for sale on eBay for 8000 €. Here’s the link:
http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=180062407332&rd=1&rd=1. Try to find it elsewhere—it’s already fitted, has a lot of rear space, and honestly, it doesn’t seem too expensive compared to what I’ve read here.
But double-check if you really need something that big for your gear.
Because trust me, with an 11-meter vehicle, you’ll be disappointed when you arrive in small towns where you’re performing—or even at village halls—unless you’re only doing big venues. Sometimes, if you’re with a crew, it’s better to have a smaller vehicle with a trailer you can unhitch and bring right up to the venue via a narrow path or straight onto wet grass. Because the door leading directly to the stage or backstage often doesn’t have a proper driveway 😕. Did they forget it?
And hauling a ton of gear by hand in pouring rain for 50 meters? No thanks! 😠
GX47
Converting a heavy-duty camper into a bus/coach/truck
Patrick26 · 2007-01-15 · Message 2005 of 3214
Hey kersode,
To use your doors while stationary (and your entire pneumatic circuit except brakes and suspension), you install a 24V compressor (to connect to your house batteries), which will keep your accessory air tank inflated. Any HGV garage can install this for you in compliance with regulations.
PATRICK26
Converting a heavy-duty camper van from a bus/coach/truck
GX47 · 2007-01-15 · Message 2006 of 3214
piccin,
First off, I can't post more photos here—I mentioned that I send them to those who ask for them!
And anyway, the people who want my bus only want it empty so they can convert it to their liking.
AND NO, a bus doesn’t sell within weeks (people hesitate to come see it, they don’t always have the time). Just look on eBay or elsewhere—you’ll see the same buses listed for months.
My bus was sold in November! Two weeks after posting it on another forum (where no one thought it was too expensive), a young guy came to see it and wanted to take it right away that Sunday. He wanted it empty, tried to lowball me, but he was nice, so I said okay—on the condition he wouldn’t leave without insurance and a bank check. He agreed to set a date, I started dismantling it, and he never showed up!
In December, I was working every day,
and I also got inquiries from people who thought they could drive it with just a B license.
Next, I never said mrkonn was drooling over my bus—you’re reading too fast. What I said was: "Some guys waste my time, they drool over it, tell me it’s fine, but then ask me to match the price of S45/S53/PR14s with 600,000 km on them…" I never mentioned Mrkonn—where are you getting this from?
And I’m not proud of the conversion result either.
I’m selling the mechanical maintenance, not the conversion. I think I’ve said this enough here, and it’s in the ad: "Converted for professional use—so it needs to be redone from A to Z for vacation use, respecting regulations and weight limits, and re-certified by Véritas for the new gas and electrical setup."
I said the issue was closed, and with all due respect, I think it’s a shame to keep adding to it—it doesn’t help and just derails Patrick’s thread.
So for everyone: comments about the sale of my bus are welcome, BUT PLEASE SEND THEM VIA PM.
Converting a heavy-duty camper from a bus/coach/truck
Kersode · 2007-01-15 · Message 2007 of 3214
Hi and thanks for your reply, but why a 24 V compressor instead of possibly a 220 V one? And regarding the sheet metal, do you have any idea what metal to use with the aluminum body to avoid creating electrolysis?
See you soon,
jlc
Converting a heavy-duty bus/coach/truck into a motorhome
SJunior · 2007-01-15 · Message 2008 of 3214
Hey kersode,
A few details about your electrolysis issue.
First off, are you sure it’s aluminum? I’m surprised—aside from the doors, the cladding panels are usually electro-galvanized steel… but I could be wrong!!!
As for electrolysis, you’re not at risk. It’s mainly an issue for our seafaring friends. Without going into too much detail, it’s a galvanic reaction (between two different metals in an electrolyte: acidic, alkaline, or saline solution). So it only happens in a marine environment. Plus, the bond between aluminum and steel is pretty weak. Last point—since your bodywork is grounded, you’ve eliminated any other electrical corrosion risks.
That said, it doesn’t solve all problems, and the main one is material expansion. Since your frame is steel, you’ll need to consider a structural bonding solution (screw-bonding or rivet-bonding).
In any case, I’d recommend leaving some space between your new panel and the existing ones, filled with a sealant to ensure waterproofing and allow for expansion.
So unless you want to go through the painting step, I’d suggest pre-lacquered white steel sheeting (matching your bus color). If I’m not mistaken, Renault uses RAL 9010 for their buses—standard color for the panels…
On another note, a quick word for GX47: no need to stir the pot, but I think your bus has real charm, and at 6500 €, it’s a steal!!! Appearance-wise, sure, it looks old, but no more than an S53 in my opinion 😛! To each their own… Anyway, stay chill as we kick off the new year—take the time to read each other’s posts!🙂
For OdFrance, I think a bus-on-chassis solution is a great balance of handling and price. Skip the lattice frames—they’ll warp. But if you’re serious about off-roading and rough terrain, you’ll need to go for a heavy-duty truck (with a short wheelbase and less overhang). That said, it’s a whole different budget, and converting it into a "motorhome" (with people in the living area while driving) gets way more complicated.
Ciao everyone!
Converting a heavy-duty camper van from a bus/coach/truck
Wampas · 2007-01-15 · Message 2009 of 3214
Hi, what are the first steps to take before spending money to make sure you can drive it later? Do you need to take it to the inspection center first and then do the work?
To get on the road as quickly as possible, is it better to downgrade to a heavy goods vehicle (HGV) or register it as a camper van?
Thanks!
Converting a heavy-duty camper into a bus/coach/truck
SJunior · 2007-01-15 · Message 2010 of 3214
Hey wampas,
To drive your bus as quickly as possible... get your D license! 😛
Just kidding, but your questions have already been discussed and answered in various ways in this thread, so I suggest you (re)read the posts starting from page 19!!!
A little extra info for kersode: if Patrick is talking about a 24V compressor, I think it’s for an independent setup (using the engine batteries, which means when you put it "in winter storage," you can turn off all your batteries, and if you need to, you just restart the engine batteries to use your doors).
Converting a heavy-duty camper van from a bus/coach/truck
Tome38 · 2007-01-15 · Message 2011 of 3214
Hey
How’s your conversion coming along?😛 We’d love to see photos here😇 as you make progress😎
A
+
😎
Converting a heavy-duty camper into a bus/coach/truck
François57 · 2007-01-15 · Message 2012 of 3214
In theory, without installing gas (so you can drive with a Class C license about a month after purchase):
check out my post on p60 (post #1425 in this thread) which you’ll find by clicking this link.
http://voyageforum.com/v.f?post=819486#819486
Patrick, could you put all the summary posts in one place? Like on your site ;), because I keep having to search for them every time.
Converting a heavy-duty camper into a bus/coach/truck
Patrick26 · 2007-01-15 · Message 2013 of 3214
Last message before my departure tomorrow morning for the Montpellier hospital, where I’m about to undergo a crazy neurosurgery procedure😕.
Please take good care of this discussion space.
Respect it, and above all, keep it alive!
Some of you have the knowledge to keep this "sharing of knowledge" spirit going—what’s made this discussion so valuable.
For me, the break is mandatory. The journey so far has been amazing😉.
Some incredible encounters, wonderful friendships, tons of contacts, and projects galore...
And I can’t be the only one for whom this topic has brought this kind of happiness...
Just a reminder: we’ve hit over 188,000 views and 2,000 posts!
All of that in a healthy atmosphere, without moderator intervention, even though our topic is one of the most active on VoyageForum!
What an adventure!
When I come back to post my next message, I don’t know where this topic will stand. Long live this thread! If all goes well for me, it’ll be in a few weeks; if things go badly, it’ll be in several months. But one thing’s for sure—I’ll be back😛!
At that point, I’ll grade your work😉!
So keep making progress on your projects, and see you all soon...
PATRICK26
PS: For updates, Sjunior will be kept in the loop.
Converting a heavy-duty camper van into a bus/coach/truck
Kersode · 2007-01-15 · Message 2014 of 3214
Good evening, good luck and best wishes!
jlc
Converting a heavy-duty camper into a bus/coach/truck
Kersode · 2007-01-15 · Message 2015 of 3214
Hi there, I'm converting a bus like you, and I've seen photos of your conversion, but I can't find the site where they're posted. If you could help me out, that'd be great.
Thanks in advance!
Converting a heavy-duty camper into a bus/coach/truck
François57 · 2007-01-15 · Message 2016 of 3214
Good luck, Patrick! Don’t worry, we’ll take the opportunity to come up with a bunch of wild ideas while you’re away—so you’ll have plenty to do when you get back. See you soon!
Converting a heavy-duty camper van from a bus/coach/truck
GX47 · 2007-01-15 · Message 2017 of 3214
😉 we're with you, you know that, and even more so on the 23rd—a date I think everyone’s noted down.
We’re counting on Sjunior for updates, ESPECIALLY don’t forget to say hi to the nurses for me 😏
Thanks in advance!
@ see you soon
GX47
Converting a heavy-duty camper into a bus/coach/truck
Drazic · 2007-01-15 · Message 2018 of 3214
hang in there patrick, we're all with you
Converting a heavy-duty camper van from a bus/coach/truck
GX47 · 2007-01-15 · Message 2019 of 3214
Hi,
I just had to share—it’s on a neighboring site, but it’s crazy how many people are shuttling between the two.
http://merco.aceboard.fr/88678-444-8655-0-Cateludo.htm😉 Really great work worth spreading!
GX47
Converting a heavy-duty camper van from a bus/coach/truck
Famillede8 · 2007-01-15 · Message 2020 of 3214
Personal coded message:
Bring me back a specialty from Montpellier—I think it’s the used black FR1 VIPs.
In the meantime, I’m taking care of your coach and your brand-new lounge. To keep an eye on it, I set up a camp bed next to it and I’m hunting down mice and moths.
See ya!
Pascal says "famillede8" but it’s actually "famillede7" the scammer!