in Thèmes › Voyager en camping-car
Converting a heavy-duty bus/coach/truck into a motorhome (page 102 of 161)
Discussion started by Patrick26 on 2004-06-14
3213 replies
This thread has been translated into English.
Converting a heavy-duty camper van from a bus/coach/truck
Piccin · 2007-01-16 · Message 2021 of 3214
I totally agree with you, Patrick, and hope you come back to us soon in great shape.
fab
Converting a heavy-duty camper van from a bus/coach/truck
Mrkonn · 2007-01-16 · Message 2022 of 3214
😉Hey Patrick,
keep hanging in there!!! we're all with you😛
Converting a heavy-duty camper into a bus/coach/truck
Ggbdb65 · 2007-01-16 · Message 2023 of 3214
Hi Patrick,
I just want to wish you good luck, though knowing your determination and morale, I have no doubt your surgery will be a complete success. See you very soon!
GG
Converting a heavy-duty camper van from a bus/coach/truck
Cateludo · 2007-01-16 · Message 2024 of 3214
Yes, thanks gx47 for the link. As you can all see, I'm not moving very fast, but I'm getting there for sure!!!
To Patrick, I wish you good luck, the best possible recovery, and that you come back to us with even more energy and kindness.
Converting a heavy-duty camper into a bus/coach/truck
SJunior · 2007-01-16 · Message 2025 of 3214
A big thank you to Patrick for your messages of support.
I’ll try to share the "master’s teachings" while he’s away... 😛
Just a quick update: the operation was originally scheduled for January 23rd, but it’s been moved up, and Pat is leaving for Montpellier today—his operation is tomorrow...
You can count on me to keep you posted as soon as I know how things go for him. In the meantime, send him all your positive vibes!
Thanks again to everyone
Outfitting a heavy-duty motorhome in a bus/coach/truck
SJunior · 2007-01-16 · Message 2026 of 3214
Small correction for kersode
I jumped the gun trying to explain why 24V compressors are used for inflating tire doors when stationary, and it’s not quite right!!!
So here’s the correction: Pat has nothing against 220V compressors, but the only ones he found come complete with tanks and would require disassembly, whereas he found 24V ones ready to install... Plus, it’s better to connect them to the habitation batteries rather than the engine ones because they "draw quite a bit of power," and if you don’t turn on the "habitation" circuit, you can still start the bus to inflate your tanks (since it’s a system that complements the existing circuit).
Also, by connecting them to 24V instead of 220V, you avoid having to turn on all your 220V accessories just to inflate your doors during winter storage...
That’s the small correction.
Converting a heavy-duty camper van from a bus/coach/truck
Tortue26 · 2007-01-16 · Message 2027 of 3214
hey there cateludo do you still have me in mind for the technical review? if you want, you can send it to me by mail, I’ll photocopy it and send it back to you. I need it, thanks
Converting a heavy-duty camper into a bus/coach/truck
Tortue26 · 2007-01-16 · Message 2028 of 3214
And if you know or if anyone knows the charging power in amps of the Saviem E7 short model, I'm interested for the battery load distributor. Thanks!
Converting a heavy-duty camper van from a bus/coach/truck
Jose6440 · 2007-01-16 · Message 2029 of 3214
HI PATRICK
I hope your intervention goes as smoothly as possible
and that you recover quickly and well.
You should post updates on your condition every day, like the great ones do 😇
SEE YOU SOON jose[;]
Converting a bus/coach/truck into a heavy-duty motorhome
Wampas · 2007-01-16 · Message 2030 of 3214
Hi, I'd like to know what's the easiest way to get a motorhome registration for a bus, with the minimum modifications—"no heating, etc."
Thanks in advance.
Converting a heavy-duty camper into a bus/coach/truck
Mrkonn · 2007-01-16 · Message 2031 of 3214
😉Hey wampas,
Since you're already on your bus, you'll need to respect several things: a kitchen area, bedroom, etc...
There's no easy way unless you wanna waste time and money😛
Converting a heavy-duty motorhome from a bus/coach/truck
Tortue26 · 2007-01-16 · Message 2032 of 3214
First of all, hi there and hope you're feeling better soon! I reread a few forum pages about the designations on registration certificates after converting a vehicle, and it's true—it’s pretty confusing. We’re all mixing things up a bit. So, I’d like to know what designation should be on the registration certificate after the conversion so we can travel wherever we want, including abroad, without having to deal with inspections for things like gas, etc., and so we can take the ferry. (We’re thinking of leaving for about two years initially.)
If anyone could clarify these terms while respecting the regulations to get the right title, I’d really appreciate it!
Converting a heavy-duty camper van from a bus/coach/truck
DrikC85 · 2007-01-16 · Message 2033 of 3214
hey there mrkonn
it's true that the paint on my S53 has faded over time, but it's only 20 years old and got a new engine installed a few years back.
The bodywork doesn't worry me too much because after a good paint job, it should look spotless. But I'll only do that after sealing the windows and finishing the conversion.
That raised section you saw on top is actually an original roof rack (about 6 meters long), made with the metal edges you can see and wooden slats running along the bodywork. I'm going to replace those with treated decking wood like you often see in front of houses or around pools.
That way, I can enjoy an apéritif over 3 meters up with some beautiful views😎.
Anyway, catch you later and have a great evening
Converting a heavy-duty camper into a bus/coach/truck
GX47 · 2007-01-16 · Message 2034 of 3214
Hey,
I’ve already mentioned this a few times—you must’ve missed it while reading. I’ll say it again, it’ll help everyone else:
Vehicle registration certificate name after proper conversion:
in (J.1) VASP
in (J.2) CARAVAN
There, I think it’s clear now—no one should miss it next time! !😎
Converting a heavy-duty camper into a bus/coach/truck
Piét4N · 2007-01-17 · Message 2035 of 3214
Hi there!
Just trying to chip in on a question that’s come up a couple times lately about gas safety inspections when you’re heading abroad for several years.
First off, the annual inspection is actually a technical check and only covers the vehicle’s roadworthiness—nothing inside the living area. When you change the registration, don’t mix up the roles of the DRIRE, the certifier (like Bureau Veritas), and the inspector (like Autovision).
Also, this inspection is mandatory for driving IN FRANCE. Abroad, the rules for licenses, insurance, technical inspections, etc., depend on the country you’re in.
See you soon!
Piéton
Converting a heavy-duty camper van from a bus/coach/truck
Mrkonn · 2007-01-17 · Message 2036 of 3214
😉Hi everyone,
I’m supposed to start sheeting the bus this weekend.
I wanted to use countersunk rivets but they’re taking too long to arrive (the seller told me someone ordered them back in November and still hasn’t received them), so I went with big dome-head ones instead.
And I’ve got a question about glue🤪, what kind of glue holds up well against vibrations🤪 and doesn’t crack

?
I’m following Patrik’s and your advice: I’m removing the windows, welding reinforcement bars, unlike the Debus where I wanted to sheet over the windows.
See you later!
Converting a bus/coach/truck into a heavy-duty motorhome
Wampas · 2007-01-17 · Message 2037 of 3214
Hi Sjunior,
As I’ve tried to explain in my various emails, I’d like to know what the minimum requirements are to get a motorhome registration for a bus. I don’t plan to live in it—it’s just for transporting artists and their gear.
From what I understand, you need:
- a table
- a kitchen
- a bed
- a toilet
- 2 jerry cans for water
- 2 jerry cans for wastewater
- a fixed stove with an external sealed compartment for the gas bottle, with high and low ventilation.
- a battery, circuit breaker, wiring, and fuses
No insulation, no heating!! Will this pass inspection????
Thanks!
Saviem SC 10 La MUSE D'O
Outfitting a Heavy Bus/Coach/Truck as a Motorhome
Mrkonn · 2007-01-17 · Message 2038 of 3214
😉 One more question,
What's the proper spacing between each rivet???
Setting up a heavy motorhome in a bus/coach/truck
SJunior · 2007-01-17 · Message 2039 of 3214
Hi MrKonn
Good solution (in my opinion)😉
As for fixing your sheet metal once you've welded the reinforcements, you'll need to use a polymer adhesive-sealant. Don't buy the cheapest stuff, and definitely don't hesitate to 'invest' a bit. The brand we used isn't available in standard retail—it's a local company. For reference, Colmast from DACD at 20 euros per cartridge. But you can find an equivalent at places like Castorama or Leroy-Merlin.
Once you have it, apply a good bead everywhere (edges and your reinforcements) and press it down firmly. Avoid tapping/hammering it because that crushes the adhesive and the sheet metal just bounces back—then you have to start all over. The rivets are just there to hold the adhesive in place while it cures (72h to reach full strength), so you only need 2 rows of rivets (top and bottom)—you can hide them with a glued-on sill rail, for example.
As for rivet spacing, I'm not totally sure. You need to space them fairly tightly since you'll be compressing a lot with each attachment, so the best approach to avoid too much waviness would be to space them closer together. It all depends on how much effort you want to put in!😉 Personally, I'd space them about 10 cm apart.
Setting up a motorhome in a heavy bus/coach/truck
SJunior · 2007-01-17 · Message 2040 of 3214
Hey wampas
Hard to answer your question because you're going about it backwards! The right approach is to ask yourself what you need in your setup to know what certification you'll get!
You'd need to give me more details—how many musicians are you bringing, who sleeps in the bus, who eats in there, how much gear you're taking...
Then you can put in whatever equipment you want; I don't know the limitations for getting 'caravan' certification in terms of equipment... And certification doesn't mean comfort, so no problem if there's no heating or insulation from that perspective!
But if you want to keep it simple, why bother with another battery bank? It all depends on what equipment you put in it, and since your list doesn't mention any electrical equipment...
On the other hand, if you want a loading area for your gear, you'll have to install a cargo barrier.
By the way, for your gas you're not required to have an external container—it all depends on how your installation is set up!
I don't see how I can answer you more precisely without more details...