in Thèmes › Voyager en camping-car
Converting a heavy-duty bus/coach/truck into a motorhome (page 110 of 161)
Discussion started by Patrick26 on 2004-06-14
3213 replies
This thread has been translated into English.
Converting a heavy-duty camper van from a bus/coach/truck
GX47 · 2007-01-30 · Message 2181 of 3214
I’ve got some slightly different info—I’ll post it here, and everyone can make their own call.
The rumor floating around among vehicle conversion pros since Nov 06 has been confirmed: with or without seatbelts, from September 2007 onward, no more road approval for side-facing seats (ambulances and fire trucks are still under discussion).
A "UTAC" or other type-approval certificate will be required for every seatbelt or seat anchor—EVEN for manufacturers (some of them don’t have them???????🤪).
Stricter RTI (Individual Technical Inspection) rules (partly due to seatbelts), and an upcoming ban is expected. Manufacturers will need to take long-term responsibility—so... goodbye to DIY conversions...
Enforcement starts Sept 07 (well, that doesn’t change much, really).
Converting a heavy-duty camper into a bus/coach/truck
Manoire51 · 2007-01-30 · Message 2182 of 3214
Hey cunni, if you find any buses that are certified and converted for 5,000 €, I'm interested—let me know!
GUY
Converting a heavy-duty camper into a bus/coach/truck
Mrkonn · 2007-01-30 · Message 2183 of 3214
Hi,
It's an S45 at 4000 € and another at 5000 €—look carefully, but there are no photos, just a number if I remember correctly.
@pluch
http://forum.lixium.fr/cgi-bin/v.eur?9878830
http://fourgon-nomade.forumactif.com/ftopic1471.htm&highlight=amenage
Converting a heavy-duty camper van from a bus/coach/truck
Shanko · 2007-01-30 · Message 2184 of 3214
Hey, I just got my hands on a forced-air heater by Shneebeli Chabaud. The thing is, I'm not really sure how to install it, so if any of you know the system, thanks in advance! My main question is about priming the setup—whether there’s a pump between the heater and the individual tank, or if gravity alone is enough (which would be surprising), or if the pump is built into the heater. Anyway, if you’ve got any info, it’s the X7 model, so 7,000 kcal/h. See pic
Converting a heavy-duty bus/coach/truck into a motorhome
Christobale · 2007-01-30 · Message 2185 of 3214
Sure enough, you can find buses fitted out for 5,000 €. I found my Setra on eBay—a S213HD. I don’t like the interior, so I’m gutting it, but it’s already decommissioned and comes with some equipment inside...
Converting a heavy-duty camper into a bus/coach/truck
Christobale · 2007-01-30 · Message 2186 of 3214
Well, with that you won't risk getting cold—it's a real furnace. It must even run red-hot, that thing... I don't think there's a pump, but I'm not sure if one's even needed, actually... I think you'll need to choose a high-quality hose so it doesn't catch fire...
Converting a heavy-duty camper into a bus/coach/truck
Fr159 · 2007-01-30 · Message 2187 of 3214
Hi there
Sorry, you're right—I should have replied but I forgot, sorry! The single beds are actually 80 cm wide. The windows were degreased with acetone, then I painted them from the inside (with a roller) using metal paint. It's been over a year now, and so far, nothing has moved. After installing my partitions, I fixed 10 cm waterproof particleboard panels, wedged at the top between the curtain rods and the aluminum storage boxes, then placed and screwed them at the bottom onto the original aluminum rail I kept. Since the latter blows hot air from underneath, I can still use the original heating system. And it's perfect!! It doesn't move at all!! I hope this answers your question—if you have any others, don't hesitate!
Converting a heavy-duty camper van from a bus/coach/truck
Kersode · 2007-01-30 · Message 2188 of 3214
thanks so much, I’ll probably have more questions later.
see you soon
Converting a heavy-duty camper van into a bus/coach/truck
Kersode · 2007-01-30 · Message 2189 of 3214
Good evening! Multiple opinions are enriching, but I don’t understand your conclusion "it doesn’t change much"—what do you mean?
Converting a heavy-duty camper into a bus/coach/truck
Kersode · 2007-01-30 · Message 2190 of 3214
I called kerhervé and their prices are interesting even before any discussion. I'm still hesitating between your solution and cateludo’s—both raise questions for me. With yours, I’ve already painted galvanized metal with a high-quality metal paint, but it didn’t hold up well. I probably didn’t do what was needed. And the other option because 6/10ths gauge sheets might seem thin.
Converting a heavy-duty camper van from a bus/coach/truck
Kersode · 2007-01-30 · Message 2191 of 3214
Good evening, first of all, I’d like to send Patrick my best wishes for a speedy recovery. Then, like many of you, I’ve been wondering about the upcoming regulation changes announced for September/October. Would it be possible to reactivate Patrick’s contacts at the DRIRE or the ministry to get a clearer idea of how the regulations might evolve? This could really impact our projects—both technically and in terms of timelines. I wasn’t planning to get mine done before late 2007 or early 2008.
Thanks in advance
Converting a heavy-duty camper from a bus/coach/truck
GX47 · 2007-01-30 · Message 2192 of 3214
Well, we’ve got the same kind of contacts if that makes you feel better—a pro in vehicle conversion who shared some "official" info, and I’ve added my own insights from elsewhere (like when Pat had his business—I work in a field where I rub shoulders with people you can’t usually reach, and some you didn’t even know existed). I also have a buddy who’s an engineer/inventor/modifier/tinkerer—I don’t even know what to call him. His job is to take an existing vehicle (or part of one) and design and build something incredible for a specific use, whether it’s for a company, the government, or an agency. Every time, it’s a unique, patented model.
When he saw I was converting my Master with a transverse bench seat—something he’s no longer allowed to do—he went off: "You can’t do that anymore! It’s dangerous, reserved for ambulances, fire trucks, and the military." And that was back in November ’06 (though it’s still allowed in RVs until September).
I used my connections to confirm what I’d mentioned earlier, and the response was: "Wait until September 2007, and you’ll know more…" followed by: "My advice? Get your Master approved by the DRIRE now" and "Wait until 2008 to sell your bus… and with the profit, you’ll buy me a case of champagne."
Sorry, guys, but I couldn’t be the first to spill the info—and definitely not the one to start the debate and get roasted for it afterward…
Oh, and I asked about the coaches currently being modified. The answer wasn’t clear, but if I understood correctly, it’s a touchy subject. Just one passing comment: "That? As little as possible…"
Bottom line, as always: they’re waiting for the elections, even though everything’s already decided… (that’s just my take, though).
Because who knows? The rules might get relaxed or delayed (like the new license plates). We’re in France, after all—don’t forget that… 😏
(And by the way, in the DRIRE’s 2006 "conversion to RV" file, the line "rear seats are exempt from seatbelts for vehicles built before January 1, 2000" has already disappeared! I’ll remind you that I had to fight in June 2005 to keep my seats in my 1986 coach—because according to the inspector, for heavy vehicles, the cutoff was 1995, not 1986. I had to get confirmation from the head office, and I still needed a follow-up inspection😕 … It’s not the same everywhere—it all depends on how the rules are interpreted. For now, though, it’s working.
WARNING:
GO EASY on the replies or DM me—this site is WIDELY READ, and I want to keep my contacts and my job. Thanks for your online courtesy.
Converting a heavy-duty camper into a bus/coach/truck
Manoire51 · 2007-01-31 · Message 2193 of 3214
Hey kersode, I’ve got the answer to your problems with the metal sheets—go for 15/10ths gauge. For painting over galvanized steel, you’ll need a special galvanized primer, otherwise the paint will flake off later. Make sure to degrease the sheets thoroughly first.
GUY
Converting a heavy-duty truck into a camper van/bus/van
Gwennn · 2007-02-01 · Message 2194 of 3214
hi there, I’m brand new here so I’m a bit lost, sorry!
I’m looking for a truck to convert but I don’t know the different regulations...😕
could you help me out with that, please?
Converting a heavy-duty camper van into a bus/coach/truck
Boniz38 · 2007-02-01 · Message 2195 of 3214
Hi,
Welcome, Gwen! Look at the top of this page, just below Cunni’s post—there’s a quick reply for newcomers.
Cheers,
Boniz
Converting a heavy-duty camper into a bus/coach/truck
GX47 · 2007-02-01 · Message 2196 of 3214
Hey Gwennn,
You should start by reading from page 19 of the forum first. Then, figure out what type of vehicle you're leaning toward. If you've got specific questions, slide into my DMs—since you're new, you'll probably end up asking stuff that’s already been covered, and that might get annoying.
GX47
Converting a heavy-duty camper van into a bus/coach/truck
GX47 · 2007-02-01 · Message 2197 of 3214
damn, do you have ADSL? or are you typing faster than me 😄😄😄
Converting a heavy-duty camper van from a bus/coach/truck
Boniz38 · 2007-02-01 · Message 2198 of 3214
Long live ADSL..😛 1 minute faster..!
Converting a heavy-duty camper van from a bus/coach/truck
Gwennn · 2007-02-01 · Message 2199 of 3214
Hi again!
So, I took your advice and read from page 19, but I didn’t see anything about heavy-duty trucks (PL). Everything I read was just about buses, and I think the regulations are different.
I also checked cunni’s “message for newcomers,” but same thing!
Basically, I’d like to know if it’s possible to communicate between the cab and the living area, if any special modifications are needed, and whether I can install solar panels, ventilation systems, etc.
Anyway, if you have answers to my questions or know of any sites that cover this...
Thanks in advance!
Converting a heavy-duty camper into a bus/coach/truck
Boniz38 · 2007-02-01 · Message 2200 of 3214
Basically, if you want to have aisle seats in the living area, you need a connection between the cabin and the living area to communicate visually and audibly.
For the panels, I don’t see what could stop you, and for the vents, only on the roof—no side evacuation.