Back to the discussion

in Thèmes › Voyager en camping-car

Converting a heavy-duty bus/coach/truck into a motorhome (page 111 of 161)

Discussion started by Patrick26 on 2004-06-14

3213 replies

This thread has been translated into English.


Converting a heavy-duty camper van from a bus/coach/truck

GX47 · 2007-02-01 · Message 2201 of 3214

Actually, here it's more like a bus, but there’s no real difference, except for the driver’s seats. In a heavy vehicle, you’ll need an opening—the easiest way is through the original window. You remove the glass, drill into the cabin, make a flexible joint, and that’s it. But if you only want the two driver’s seats in the cabin, you don’t even need to do that.

Converting a heavy-duty camper into a bus/coach/truck

GX47 · 2007-02-01 · Message 2202 of 3214

uh, next time I’ll check if you’re online before replying—you’re always faster than me.

As for the extractions, you can do them if they’re more than 1800mm from the living space floor, but double the value for the roof exit.

Converting a heavy-duty camper van from a bus/coach/truck

GRD · 2007-02-01 · Message 2203 of 3214

Good evening, I’ve been following your discussions for three months now and find the site really interesting, despite a lot of repetition from people who are too impatient—they jump from the intro to the last page without even having a structured project or doing any personal research.

For GX47, I find your last two spots a bit unclear: 1° First, it’s important to remind all beginners that the biggest challenge when converting a VASP is increasing the number of seats compared to the vehicle registration document (except for coaches, obviously), due to DRIRE requirements for crash-test-approved seatbelts (which are reserved for professional manufacturers) and are essential for the VASP registration. 2° Lateral heating vents shouldn’t be placed under a window or opening.

On another note, I wish PATRICK26 a speedy recovery.

Converting a heavy-duty camper into a bus/coach/truck

Jose6440 · 2007-02-02 · Message 2204 of 3214

hey everyone

any news about Patrick?

I’d like to know if anyone knows the dimensions of the upper and lower ventilation grates for good airflow in a bus (FR1), or could give me the formula to calculate it (gas standard)

see ya, jose

Converting a heavy-duty camper van from a bus/coach/truck

Cunni · 2007-02-02 · Message 2205 of 3214

Check the standard NF S56-200: http://voyageforum.com/v.f?post=537223;#537176

Do a word search on the page for "cm²"; otherwise, the answer is in section 6.

Converting a heavy-duty camper van from a bus/coach/truck

Jose6440 · 2007-02-02 · Message 2206 of 3214

hey cunni

thanks for your reply, but the Veritas inspector told me the grille size is related to the volume 🤪 and I can't find the formula to calculate it😕 Do I need to include the sleeping area and the lounge that opens onto the kitchen? Or is that excluded from the volume?

If anyone knows, thanks

see ya, jose

Converting a heavy-duty camper van from a bus/coach/truck

GX47 · 2007-02-03 · Message 2207 of 3214

Apparently you didn't buy the AFNOR guide 😠

NF EN 721 (S 56-320) Leisure habitable vehicles Safety ventilation requirements

From page 65 to page 77 of the AFNOR guide, everything is in there.

GX47

Converting a heavy-duty camper van inside a bus/coach/truck

Boniz38 · 2007-02-03 · Message 2208 of 3214

Here's the table—it seems to me it's based on surface area, not volume.

Every enclosed space must be equipped with VB and VH.

Cheers,

PS: GX, I waited for you to reply first... lol

Converting a heavy-duty truck into a camper van/bus/truck

Toma29 · 2007-02-03 · Message 2209 of 3214

Hi everyone, I’m planning to live in a truck or bus, and I’d like to ask a few questions that I hope haven’t been asked yet.

Given that I’m taking my heavy-vehicle license on February 19th (it lasts 10 days), do you think I’ll have time to convert a bus before the seatbelt law comes into effect in October 2007, considering I want to get it certified as a camper van?

I read in the first few pages that the door leading to the outside must be less than 45 cm from the ground. Is that feasible with a truck?

Finally, are there models like the S45 or S53 with a central door and a rear door, all on the left side?

Thanks to all of you for the many answers to the questions I had!

Converting a heavy-duty camper into a bus/coach/truck

Fr159 · 2007-02-03 · Message 2210 of 3214

Hey Toma

The answer to your first question depends on how much time you have each week, how fast you work, and how much cash you’ve got for buying gear. If you’re unemployed, you know how to work quickly and well, and you’ve got the funds for supplies, then the answer is YES—you’ll have time to convert a bus, but don’t drag your feet. For the second question, the answer is YES—it’s doable in a truck. The topic’s covered in some threads, but the tricky part is communication between the living space and the driver’s cab. And the answer to the third question: It’s the same as with caravans—the door’s on the right because we drive on the right, and it’s safer to step out onto the sidewalk. 😏 You *could* get a coach with a central or rear door on the left, but you’d need a British tour bus with right-hand drive, for sure😕

See you soon 😉

Converting a heavy-duty camper from a bus/coach/truck

Toma29 · 2007-02-04 · Message 2211 of 3214

Thanks for your reply! About the doors, they’re on the left, of course, but I was wondering if it’s possible to find a bus with both a central door and a rear door at the same time.

My plan is to buy a bus, strip it down, and convert it into a home on wheels—fully independent in terms of energy (solar panels, a generator, and maybe even a wind turbine). It’s true that it takes a lot of time, though.

I’ve also thought about buying a bus that’s already certified and just customizing it to my taste, but I’m not sure if the certification would still be valid afterward. For example, if the registration says it’s been a motorhome for 10 years, but everything inside is brand new.

Wishing you all the best on your projects!

Converting a heavy-duty camper van from a bus/coach/truck

GX47 · 2007-02-04 · Message 2212 of 3214

If you have a 10-year-old camper van registration and you redo the interior, it doesn’t change anything on the registration certificate, and you don’t have to go back to the DRIRE (besides, they don’t want to see you again) UNLESS you modify the characteristics listed on the registration.

For example, if you change the number of road seats on the registration (even though in France you’re legally allowed to temporarily remove a seat or bench from a vehicle to use the space for something else or for bulky luggage, etc.—nothing is specified about this), or if you change its classification (camper van) or decide to drill into the bodywork.

The DRIRE does specify, however, that you must absolutely respect the weight distribution set by the manufacturer (maximum axle loads).

ON THE OTHER HAND, you’ll absolutely need to have your new layout inspected by Veritas because you’ll likely be working on the gas and electricity systems and modifying interior spaces (evacuation corridors).

But what about the furniture and beds???

For rear and middle doors, these are usually found on city buses, but their top speeds are crazy 🤪

GX47

Converting a heavy-duty camper into a bus/coach/truck

Fr159 · 2007-02-04 · Message 2213 of 3214

Yes, there are some, but as GX47 mentioned, they’re urban buses.

Converting a heavy-duty camper into a bus/coach/truck

Tome38 · 2007-02-04 · Message 2214 of 3214

hi anyone know the brand: berkhof 😮 with a name like that, it must be a German brand😐

A + 😎

Converting a heavy-duty motorhome from a bus/coach/truck

Patrick26 · 2007-02-04 · Message 2215 of 3214

REALLY GOOD COACHBUILDER THAT SPECIALIZES IN MAN, DAF, AND VOLVO CHASSIS.

Dutch, if I'm not mistaken.

PATRICK26

Converting a heavy-duty camper van from a bus/coach/truck

François57 · 2007-02-04 · Message 2216 of 3214

Since you mentioned that it's allowed to temporarily remove seats in France, does this apply to a coach as well? Because I've removed 44 of my 53 seats, and it would really annoy me to have to put them back just to pass the mine inspection (the vehicle isn't homologated yet). Considering that theoretically, my vehicle will be rejected (the mine guys are a pain—they told me to put my seats back for the inspection, even though I’ll remove them right after).

On top of that, the DRIRE engineer told me that with an unspecified VASP, you can drive on Sundays without a tachograph disk (which contradicts what you said last week). It makes sense since an association with an exhibition bus can easily drive it around on weekends. Can you confirm this or not?

Because, as I said, if I want to convert it, it has to go through VASP NSCP so I can drive it with a category C license, even if it's just from the parking lot to my place where I can plug it in.

Converting a heavy-duty camper into a bus/coach/truck

Tome38 · 2007-02-04 · Message 2217 of 3214

ok thanks

Great to have you here patrick26😇

A + 😎

Converting a heavy-duty camper van into a bus/coach/truck

Christian06 · 2007-02-04 · Message 2218 of 3214

Paaaaaaaaatrick is baaaaaaaaaaaack! Hallelujahhhhhhhhhhhh! Paaaaaaaaatrick is baaaaaaaaaaaack! And we're sooooooooooo happy!

Take goooooooooooooood care of yourseeeeeeeeeeeeeelf, even sooooooooooooooo, Patriiiiiiiiiiiiiiiiiiiiiick, And welcoooooooome back.

Christian 😉

Converting a heavy motorhome from a bus/coach/truck

GX47 · 2007-02-04 · Message 2219 of 3214

Hi,

No, for the DRIRE, the vehicle must be compliant (so all its seats).

For the controlographe, I don’t remember mentioning it last week, but it’s possible—I take so many notes... lol😄

Here’s the brand-new official text already posted by PATRICK26 (hey there, how’s it going? 🙂😉 on another forum thread. Here’s the link to the thread: http://voyageforum.com/...1;page=unread#unread

Actually, VASP unspecified—you should have it, I think, but if you’re using the vehicle for personal use without public transport, you’re not required to have it. (However, if you’re operating as a TCP for the CT, it’ll need to have its valid bi-annual inspection before the CT.)

On Sundays, it’s indeed for goods transport, which isn’t allowed to circulate from Saturday 10 PM to Sunday 10 PM and on public holidays (if that’s changed, the pros can clarify).

I’m like Pat—I don’t like unspecified VASP, but in your case, given your arguments, why not?

Converting a heavy-duty camper into a bus/coach/truck

Motopaul · 2007-02-04 · Message 2220 of 3214

We have a Mercedes 303 for sale. We’re an association that’s always maintained the bus. It gets its MOT every year since we only drive it in the summer. If it can make someone among you happy, we’d be delighted. There won’t be any issues with the bus.

Good luck to you all

VoyageForum — the largest community of French-speaking travellers.