Back to the discussion

in Thèmes › Voyager en camping-car

Converting a heavy-duty bus/coach/truck into a motorhome (page 115 of 161)

Discussion started by Patrick26 on 2004-06-14

3213 replies

This thread has been translated into English.


Converting a heavy-duty camper into a bus/coach/truck

Mrkonn · 2007-02-07 · Message 2281 of 3214

πŸ˜‰ THERE WE GO, I’ve started building the wooden framework for the ceiling, and the framing for the bedroom and bathroom πŸ™‚πŸ˜‰πŸ˜› I’ll post photos later😏

Converting a heavy-duty camper into a bus/coach/truck

Scoubidou83 · 2007-02-07 · Message 2282 of 3214

Awesome, your project is really starting to take shape—keep it up!

Converting a heavy-duty camper van from a bus/coach/truck

Christobale · 2007-02-07 · Message 2283 of 3214

I'm up for a meet-up drinks thing...

Converting a heavy-duty camper into a bus/coach/truck

Mrkonn · 2007-02-07 · Message 2284 of 3214

πŸ˜‰Hey there Scoubidou83, thanks!

Making steady progress!!! πŸ˜›

I’m posting a few pics of the wooden frame.

Converting a heavy-duty camper van from a bus/coach/truck

Gasmobil · 2007-02-07 · Message 2285 of 3214

Great job! Everything looks well done but... Well, there's always a but! Your insulation—is it in contact with the wall? So where’s the air gap? That’s the most important part for insulation.

Converting a heavy-duty camper van from a bus/coach/truck

Barouw · 2007-02-07 · Message 2286 of 3214

Hi everyone!

This is my first post, but I’ve been following the discussion for quite a while πŸ™‚

I think your projects are super interesting, very technical (but I’m really into it 😎), and above all, full of passion!!!

However, I have a question—I had pretty much understood everything up to now, but for the past 2-3 weeks, I haven’t had as much time to read all the messages.

In what cases will seatbelts be mandatory?

Anyway, good luck to everyone with your projects, and get well soon, Patrick! !

Converting a heavy-duty camper into a bus/coach/truck

Mrkonn · 2007-02-07 · Message 2287 of 3214

πŸ˜‰Hey Gasmobil, long time no see!!!

For the insulation, it's installed on the bus's metal frame. There's an air gap of about 4 cm above it, and there'll be another 3 or 4 cm air gap between the insulation and the paneling. I'm also going to glue a 2 mm soundproofing layer on top of the thermal insulation to gain about 20 dB.

Converting a heavy-duty camper van from a bus/coach/truck

Mrkonn · 2007-02-07 · Message 2288 of 3214

πŸ˜‰Hi Barouw,

For now, seatbelts are mandatory for vehicles made after 2000, and there’s nothing about side seats—still just rumors for now! We’ll see what happens in October.

Converting a heavy-duty camper van from a bus/coach/truck

Gasmobil · 2007-02-07 · Message 2289 of 3214

Is the soundproofing to protect you from outside noise or to protect others from your noise???? LOL!!!!!😎

Converting a heavy-duty camper into a bus/coach/truck

Jose6440 · 2007-02-07 · Message 2290 of 3214

hey mrkonn πŸ˜‰

I'm making good progress too, I might post some photos tomorrow πŸ˜„

does anyone have any updates on amasxmx's renovation work? ( the rust and the elected officials )

see ya, jose

Converting a heavy-duty camper into a bus/coach/truck

Mrkonn · 2007-02-07 · Message 2291 of 3214

πŸ˜‰A bit of both for the soundproofing!!!

Go ahead jose6440, don’t hesitate with the photos! It’s true we haven’t heard from amasxmx in a while

Converting a heavy-duty camper van from a bus/coach/truck

Barouw · 2007-02-07 · Message 2292 of 3214

Thanks so much for the reply!

It’s probably wiser to wait until October to see what happens.

Starting a project and then realizing it’d struggle to pass inspections would be such a shame πŸ€ͺ

Off-topic: mrkonn, where in Brittany are you?

Converting a heavy-duty camper van from a bus/coach/truck

Christobale · 2007-02-07 · Message 2293 of 3214

Hey Mrkonn, your project looks really cool! How did you attach the insulation to your walls? What kind of insulation did you go for? And what did you choose for soundproofing?

Converting a heavy-duty camper van from a bus/coach/truck

Mrkonn · 2007-02-07 · Message 2294 of 3214

πŸ˜‰Hey there, I'm in Morbihan if you wanna swing by for a second-hand deal.

Hi Christobale, I used double-sided tape to hold the insulation in place. It's 17 elements on the ceiling and 11 elements on the sides. For soundproofing, I used 2mm floating under-parking material—it's black, but I can't remember the name off the top of my head.

Converting a heavy-duty camper into a bus/coach/truck

Jose6440 · 2007-02-07 · Message 2295 of 3214

The double-sided tape peels off in the heat, so you need to place the panels as close together as possible or secure the insulation with an adhesive sealant, at least at the top and on the sides. Otherwise, at the first sign of heat, the insulation will end up at the bottom of the lining.

See ya, Jose

Converting a heavy-duty camper into a bus/coach/truck

Mrkonn · 2007-02-07 · Message 2296 of 3214

πŸ˜‰The double-sided tape helps me hold the insulation in place while I put the wooden frame on top, so no problem😎

Converting a heavy-duty camper into a bus/coach/truck

Christobale · 2007-02-08 · Message 2297 of 3214

Mrkonn, when you say 17 elements, do you count all the layers of each type of element? I also think that double-sided tape isn’t great because my Setra was done that way and in some places it came loose... you’ll need to use a glue like neoprene on your panels to keep them in place...

Converting a heavy-duty camper into a bus/coach/truck

Boniz38 · 2007-02-08 · Message 2298 of 3214

Hey everyone..!

For the insulation, I bought mine from a guy on eBay who specializes in insulation materials. It's microbubble insulation with a soundproofing layer. Apparently, it's equivalent to 11 layers, and I paid 240 € for 75 mΒ², including three rolls of aluminum tape. It's discounted stock—just a few damaged spots (nothing major, covered with aluminum tape).

http://cgi.ebay.fr/ISOLANT-PHONIQUE-THERMIQUE-R-4-7_W0QQitemZ190079266344QQihZ009QQcategoryZ120878QQrdZ1QQcmdZViewItem

Later! Boniz

Converting a heavy-duty camper van from a bus/coach/truck

Jose6440 · 2007-02-08 · Message 2299 of 3214

hey boniz38 that micro-bubble insulation has a few downsides πŸ˜• if it has 2 layers of bubbles, it's between 16 and 18 mm thick—it sticks to the walls on its own, but it's way less easy to handle and doesn’t mold to shapes as well πŸ€ͺ and I can guarantee it insulates *way* worse than MrKonn’s version.

By the way, you’ll hardly find it at building suppliers anymore—they’ve all switched to 5-to-9-layer (aluminum) stuff, and on top of that, it’s m0 πŸ™‚ and it’s equivalent to over R5 (20 cm of fiberglass), but it’s a bit pricier.

see ya, jose

Converting a heavy-duty camper into a bus/coach/truck

Mikro · 2007-02-08 · Message 2300 of 3214

Hi, we think we’ve got a little issue with insuring the bus. Here’s the thing: I’ll be the only driver in the bus, but I’m still on a probationary B license (I’ve got one year left—those 3-year rules are such a pain). And I’ve only had insurance in my name for one year. So here’s the problem: we’re already wondering if it’s possible to put the bus in a buddy’s name—he doesn’t have a C license but has had his license for over 3 years—and have me drive. Will they take into account that I’m still on a probationary license? Also, is it the same for heavy vehicles (probationary license, A on your back, etc.)? Thanks.

VoyageForum β€” the largest community of French-speaking travellers.