Back to the discussion

in Thèmes › Voyager en camping-car

Converting a heavy-duty bus/coach/truck into a motorhome (page 117 of 161)

Discussion started by Patrick26 on 2004-06-14

3213 replies

This thread has been translated into English.


Converting a heavy-duty camper van from a bus/coach/truck

Zuccherata · 2007-02-09 · Message 2321 of 3214

Hey kestarv, if that’s your bus with the eyes on the back, we’ve probably already met at some parties across France and at teknivals. I’ve seen that bus often—I remember following it after a teknival near Saint-Étienne a few years ago, and even back then, I was already dreaming of having one, but it’s not doable for now. Anyway, it’s a real beauty, your Iveco! Good luck with everything you’ve got to do, but on March 10th, you’ll get some great advice. Safe travels,

Glad Patrik’s back—ciao! Plume and Jul

Converting a heavy-duty camper van from a bus/coach/truck

Kestarv · 2007-02-09 · Message 2322 of 3214

Hey there!! Nope, it’s not mine 😄

But I’ve seen it a bunch of times too!!!!!😉 What are you up to on the 10th? Come down and see us—we can chat about all this 😉 See you soon

Converting a heavy-duty bus/car/coach into a motorhome

François57 · 2007-02-09 · Message 2323 of 3214

This is really great work. Hats off!

I have the same type of vehicle and the same ideas. I was thinking of using styrodur (extruded polystyrene, yellow or green) on the ceiling and sides instead of plywood. What do you think? Especially for the sides, since heat loss will mainly come from the roof (in winter, heat escapes upwards, and in summer, the sun beats down on the roof). Plus, it seems silly to pinch pennies and end up with a subpar bus.

By the way, how did you attach your battens to the stringers? Just with self-tapping screws?

That big thing in the future bathroom in your first set of photos—is it a water tank?

For wind turbines, I already looked into energiedouce.com. You can order online or go to Paris to buy one. They recommend a mast of 6 to 12 meters, meaning the height of the bus plus a 3-meter mast, and you should have enough wind in open areas with a 1.20-meter rotor diameter. They sell 750W models, which are more cost-effective than solar panels, depending on the region.

Later!

Converting a heavy-duty camper into a bus/coach/truck

Patrick26 · 2007-02-10 · Message 2324 of 3214

Watch out for styrofoam and sheet materials!

They make noise when rolling!

And for heat loss, if I remember correctly, HVAC professionals estimate that in homes, about 30% of the heat escapes through the walls—so imagine with our metal shells!

In aviation, they use a layer against the fuselage, an air gap, and a layer behind the interior panels. Given the extreme cold at high altitudes, there must be a good reason. I went with this solution using medium-thickness multi-layer insulation in two passes.

For the meet-up proposed by kestarv, it’ll be the third one in the southeast!

If this keeps up, it’s gonna become a regular thing!

What’s going on in the other regions?😕

For the spring meet-up, if you could move it to Angers or Bourges, it’d save us some driving—because we’re definitely coming! So make sure the organization is solid...

PATRICK26

Converting a heavy-duty motorhome into a bus/coach/truck

François57 · 2007-02-10 · Message 2325 of 3214

Okay, so I had an idea:

Where I live, they organize all kinds of events every year—like motorcycle gatherings—with a set-up area that includes two multi-purpose halls and a couple of hectares of land. It’s open to the public, anyone interested, and you can grab a bite, etc.

So we could do the same with our vehicles, which would mean bringing them as far as Metz. But we’d need to think about whether it could attract a decent crowd (keeping in mind it’s more of an association-based thing and requires some serious on-site resources).

Converting a heavy-duty camper from a bus/coach/truck

Christobale · 2007-02-10 · Message 2326 of 3214

And in your solution, how much space did you leave between the two layers of insulation? I'm still not sure how I'm going to redo my Setra since it has double glazing...

Converting a heavy-duty camper van into a bus/coach/truck

GX47 · 2007-02-10 · Message 2327 of 3214

🙂 Hi Patrick, I’ve planned to organize the meet-up in Angers, but not in 2007—maybe 2008 or 2009 since I’m not ready yet.

I’ve got a 7-hectare plot, that should be enough 😏 The building for the meet-up (150 m² enclosed) is packed to the brim, so I’m going to build another one and convert this one for afternoon work and, most importantly, for what I plan to host in the evenings.😉 The guest house for non-residents just needs a roof renovation—still an easy 6 to 8 months of work.

On the other hand, the side activities for the ladies are already planned (I’ll be handling those 😄😄😄).

So 2007 isn’t doable, but if François57 has a possible plan, given there are quite a few Northerners on the site...

Converting a heavy-duty camper van from a bus/coach/truck

SJunior · 2007-02-10 · Message 2328 of 3214

Hey everyone,

Just a quick hello to say okay for the meet-up on March 10th (it’s far enough ahead that I don’t have anything planned yet, but too far to be sure I won’t have a conflict by then! 😉)

In the meantime, about insulating your buses, I’m adding to the info shared above: there seems to be a small misunderstanding about the air gap. It’s not supposed to go under or over the insulation but *between* the insulating layers! That’s the whole point of multi-layering! So I made a little sketch for you... (I’m trying to attach it as a JPG, otherwise I’ve uploaded it to the blog as a PDF: http://motorhome.blogs-de-voyage.fr/isolation/)

I can confirm it’s better to glue your insulation with polymer mastic adhesive—otherwise, with double-sided tape, it’ll shift, fall off, etc., and you’ll lose efficiency. And forget about aluminum tape, except for small repairs!

For the air gap space, we used the bus’s structure relative to the outer metal sheet, which was about 4 cm. I can tell you there’s a real difference between the air temperature between the two layers and that of the inner wall! You can even feel where the mounting structures are (slight thermal bridging due to the lack of an air gap and slight compression of the insulation)!!!

See you soon!

By the way, I’m sensing a bit of slack in the writing of some posts 🤪—a little more care, please! 😉

Converting a heavy-duty camper into a bus/coach/truck

AMAsxmx · 2007-02-10 · Message 2329 of 3214

Hey everyone.....

Just dropping by to give you an update since I know you’ve been wondering how I’ve been. Work’s been keeping me busy—averaging 800 km a day behind the wheel of a truck—and on top of that, I’ve been going through a rough patch lately (one day you’re crying, the next you’re laughing), so I haven’t had the time or the mood to pop in on the forum much. But hey... no need to slit our wrists over it! I’m still keeping an eye on things, and it’s great to see some of you making progress!

As for my B10, I haven’t touched it since early December, but I think I’ll get back to it soon!!! And for those *elected officials*—they still haven’t worn me down, so they won’t get the best of me. For the meet-up in March, I think I’ll be there.

Hang in there with your projects, everyone—let’s stay in touch.

P.S.: Happy New Year to all, and get well soon, Pat! 😉

Converting a heavy-duty camper into a bus/coach/truck

Shanko · 2007-02-10 · Message 2330 of 3214

Actually, it all depends on how you got your license. I have a "BEP Routier" (or CSTR by its real name), which meant that at 19, I was already driving semis because there was no weight limit. (Real truckers were shocked to see a young kid behind the wheel of a semi!) The weight limit based on age is a bit ridiculous, but it’s not the first law that is. 😉 I think with a CFP, there’s no weight limit either, and you automatically get the FIMO, just like with the BEP. Insuring a vehicle you’re not qualified to drive will be a nightmare. And even if you manage to, I’d strongly advise against driving it—if something goes wrong...

Converting a heavy-duty camper into a bus/coach/truck

Toto56 · 2007-02-10 · Message 2331 of 3214


Converting a heavy-duty camper van from a bus/coach/truck

Toto56 · 2007-02-10 · Message 2332 of 3214

Same for me with the CFP—no weight limit before 21 years old.

Converting a heavy-duty camper into a bus/coach/truck

Franois · 2007-02-10 · Message 2333 of 3214

Hi everyone, regarding insulation, I used 40 mm styrofoam glued with contact adhesive against the interior of the exterior wall (be careful to use special glue, otherwise the styrofoam melts), which helps reduce noise. Also, for installing windows, the styrofoam is rigid enough to tighten the walls with the window frames without needing reinforcements. I don’t know if it’s the best solution, but that’s how I did it. On the other hand, a little tip: avoid screwing into metal or reinforcements that aren’t insulated, as condensation points appear on the screw heads when it’s cold outside. Anyway, I’ll leave you to it—we’re hitting the road with the bus! Have a great weekend and happy DIYing!

Converting a heavy-duty camper van from a bus/coach/truck

Manoire51 · 2007-02-11 · Message 2334 of 3214

Hi there, it's really great to see photos of your work in progress! 😊 That gives us ideas and advice for our future projects. Good luck to everyone!

Converting a heavy-duty camper van into a bus/coach/truck

Jose6440 · 2007-02-11 · Message 2335 of 3214

hi AMAsxmx nice to hear from you and glad everything’s going well see ya jose

Converting a heavy-duty motorhome from a bus/coach/truck

François57 · 2007-02-11 · Message 2336 of 3214

Oh no, sorry, not for me in 2007—the year’s already packed with events. But if we manage to organize something, my location in Moselle (Metz) really puts us in a central European spot (10 km from Luxembourg, 20 km from Germany). We’re in the Land of the Three Borders.

Otherwise, Sjunior’s explanation diagram is really clear. So if I’ve got this right, I leave 2 to 3 cm between my ceiling and the spar, and that’s it for the thermal bridge, right?

About the FIMO and BEP: I can confirm that when you pass the *BEP routier* (where you have to learn a lot of things, obviously), you’re not limited to 21 years old and can drive with a category E(C) license from 18 (the semi-trailer that non-professionals get at 21). You take the *FIMO* during your training, and you only retake the *FCOS* (which is a periodic refresher for the FIMO). But it’s not mandatory for your personal goods—only for others’ (classic transport). It’s actually a quality guarantee because the FIMO doesn’t teach you how to drive but how to drive smoothly, take turns properly, etc., so you don’t crush the tomato cargo or anything else.

For insurance, I insured my coach with only a category B license—I went through a broker. The only catch is that, of course, it has to be moved by a driver with a category D license (anyway, on top of the category C license, I’d need the *mines* and everything to move it myself, so...).

One more thing: for those near Nancy-Metz-Thionville, there’s a huge rock concert on March 17th—entry is 10 € with a drink, and extra drinks are 2 €. DM for details.

Converting a heavy-duty camper into a bus/coach/truck

Zuccherata · 2007-02-11 · Message 2337 of 3214

Hey, well for the 10th we’ll see if we can make it, but it won’t be easy for us—we’ll try though; and about the HGV driver’s vocational diploma (BEP), I can confirm there’s no weight limit. In the trucking company where I worked, there were guys who at 16 had their B, C, and Ec licenses, and by 18 they’d graduated with their vocational baccalaureate, so it was all good—no weight restrictions, and they could do other jobs besides driving . Good luck to you!

Converting a bus/truck into a heavy-duty motorhome

Mrkonn · 2007-02-11 · Message 2338 of 3214

😉 I only used self-tapping screws and thanks for the site but I already knew it 😛

I'm posting some photos of the tanks in the bedroom and the bathtub in the bathroom—it's temporary, just to see how it works

Converting a bus/coach/truck into a heavy-duty motor-home

Pascal66 · 2007-02-11 · Message 2339 of 3214

Hello, I've been following your site with admiration for a year! It's really very interesting. I'm planning to convert a bus into a motor-home with a large cargo hold to fit a car inside! I found a 1992 Volvo B10M with a center engine and 675,000 km for €11,000 before tax. It seems to be in good condition, the bodywork was fitted out by Berkhof. I'd like to be able to sleep 6, or even 8 people occasionally. Layout: Cargo hold at the rear with a ramp to load the car onto the rear axle, 2-person bed above, bathroom with shower, 2 extra beds, kitchen, 4 face-to-face seats with a table on the driver's side. Right side, continuing from the rear, toilet accessible via the rear door, 2 extra beds, fridge, 4 face-to-face seats with table! There you have it - I'd like your advice on how to move forward. If Volvo buses are good, .... I received authorization from Volvo France to decommission it. I'm looking for plans for this type of vehicle to build my own! Patrick, what's your bus? I think you also want to fit a car inside? Thanks Pascal PS: I'm from Loir-et-Cher (Blois)

Converting a bus/truck/coach into a motorhome

Wampas · 2007-02-11 · Message 2340 of 3214

For sale: cheap bus—some bodywork needed!!!

VoyageForum — the largest community of French-speaking travellers.