in Thèmes › Voyager en camping-car
Converting a heavy-duty bus/coach/truck into a motorhome (page 154 of 161)
Discussion started by Patrick26 on 2004-06-14
3213 replies
This thread has been translated into English.
Converting a heavy-duty camper van from a bus/coach/truck
Christobale · 2007-06-05 · Message 3061 of 3214
For the tires, 100,000 km is for the front; at the rear, you can double that, but still watch the age and especially make sure to respect the pressure for even wear... A good place for imported tires: www.123pneus.com. I’ve already bought several there and had them fitted at AD for next to nothing—it’s a great deal...
Setting Up a Heavy-Duty Motorhome in a Bus/Coach/Truck
Hotware · 2007-06-05 · Message 3062 of 3214
The HGV license? Doable—three weeks and €1,400 later, you've got it.
A large cargo area, 4 mountain bikes, and 4 rooms—you can make it work if you want, as long as they're mini single-person rooms. I'd rather mount the bikes on the back (though fair warning, that still takes up a ton of space).
My coach is set up for 6 sleeping spots 'comfortably' and 9 in tight mode (getting around gets annoying with 9 people in there).
Rip out the driver's cabin and you've got 11.5m × 2.34m of usable space—sketch it out and you'll see what you can do with that!
Bigger buses burn through more fuel (the taller it is, the more cargo space, the more it guzzles!). Engine power matters too. Mine's pretty tall with strong power, and it uses 33L/100km (but it's got AC and loads of stuff running in it).
Co-ownership is often a headache (who pays when something breaks, usage schedules, all that)—better to just do it yourself and split the costs! !
Outfitting a heavy motorhome in a bus/coach/truck
Citroenibis · 2007-06-05 · Message 3063 of 3214
Hi Hotware, about the dimensions, when you say 11.5*2.34, is that once the bus is insulated or not? And how much height do you have?
Wow, when you talk about 11.5 meters long just on the inside, what's the total length of your bus, and is there any way to see it in a photo? Because I tried looking at a few posts back and couldn't find one.
The fuel consumption, if I have to cover it alone, is honestly scary, knowing it's like 5 to 6 times my current consumption. 🤪
What do you mean by splitting the costs?
So many questions, I know, but those dimensions seem amazing! 😉
Setting up a heavy-duty campervan in a bus/truck
Hotware · 2007-06-05 · Message 3064 of 3214
It has insulation and no driver's cab (otherwise it would be 12m*2.50)
Height just over 1m90, I think 1m94.
I'm 1m82 and it fits perfectly :)
Fuel consumption - well, it's a big engine (but hey, the opportunity was there, so I grabbed it!)
Photo: see my avatar. I'll put my website online end of June with all the details.
Sharing costs: well, you calculate the vehicle's cost per km (wear and tear, fuel consumption) and divide it by the number of passengers.
OK it does consume fuel, but no hotel bills to pay and what flexibility for schedules!
And comfort and hygiene - you get to choose those yourself! !
Setting up a motorhome in a bus/coach/truck
Citroenibis · 2007-06-05 · Message 3065 of 3214
Ok, a huge THANK YOU for all those clarifications, but there's one last little thing I don't get — your driving position is only 50cm!!😮
Converting a heavy-duty camper into a bus/coach/truck
Hotware · 2007-06-05 · Message 3066 of 3214
Sorry, typo—it’s actually 10.5 meters (driver’s area is about 1 m, plus 2x25 cm lost at the front and back).
Converting a heavy-duty camper into a bus/coach/truck
Citroenibis · 2007-06-05 · Message 3067 of 3214
Thanks a lot, 25 square meters is bigger than a studio apartment! 😎
Fitting out a heavy-duty camper in a bus/coach/truck
Mrkonn · 2007-06-06 · Message 3068 of 3214
Hi,
I’ve got the same space with my S53, and it’s definitely not "high-end."
Boat and motorhome equipment is really expensive, but if you search well online, you’ll find what you’re looking for.
At the moment, I must be close to saving up 3,500 €.
For 10,000 € to 12,000 €, you can put together a great project😛, maybe even less.
With 50,000 €, I’d rather buy an apartment in the mountains😎
Just a reminder to Hotware: not all household equipment is allowed.
Ciao
Converting a bus/coach/truck into a heavy-duty motorhome
Fr159 · 2007-06-06 · Message 3069 of 3214
Hey José (and the others, even if they don’t agree with me😛).
Here are the part numbers for FR1 bottle tanks:
47-liter tank: 50 00 954 833
30-liter tank: 00 00 788 423
16-liter tank: 50 00 981 743
6-liter tank: 55 16 030 086
20-liter tank: I haven’t found it on my microfiches
Since there are several FR1 owners, I’ve included photos of some microfiches. If they’re not readable, I can email them to you. I think I have the complete binder—I can’t promise to print and scan everything, but if you need something, I can check. I also included the tank microfiches, as I mentioned: there are three tanks of 230, 117, and 150 liters, totaling 497 liters.
I’d also like to share my thoughts on the pros and cons of our projects. Some will say we consume too much, that it’s expensive, that we can’t access or park everywhere. Others, like Patrick, will have enough arguments to change your mind.
Those who don’t like cars will say it’s pointless to drive a sports car because it’s expensive, uncomfortable, and useless since you can’t drive fast—might as well drive a Twingo. You either love it or you don’t, but I’ll tell you this: in a big car, I’m in my element—it’s a real pleasure. Same with my bus—it’s a joy. We’ve got space, and despite its 12 meters, we stop where we can and we’re happy.
Could someone explain the word *profitability* to me? How can you make a 60,000 € motorhome (classic) profitable? Could someone explain how it’s more cost-effective to vacation on Île d’Oléron than on the Côte d’Azur? Well, I’d say the most profitable thing is to stay home and do nothing—at least then you’ll save money. You’ve got to live, have dreams, and make them happen when you can.
My goal isn’t to be the richest guy in the cemetery😏, so I built a motorhome bus for 25,000 €. I did it, it’s certified, and I’m happy. Just a few improvements left to make.
See you soon
Converting a bus/coach/truck into a heavy-duty camper
Mo29 · 2007-06-06 · Message 3070 of 3214
Hey Patrick, I just bought a Renault S53 school transport van. Who should I contact to convert it to heavy-duty? Thanks in advance
Converting a heavy-duty camper van into a bus/coach/truck
Christobale · 2007-06-07 · Message 3071 of 3214
Hi mo29, this question has already been asked dozens of times. I think it’d be a good idea if you read the forum starting from page 19, because you’ll find tons of answers to many of your questions—and even to ones you didn’t even suspect you had...
Converting a heavy-duty camper van into a bus/coach/truck
Gasmobil · 2007-06-07 · Message 3072 of 3214
Hello.
I quite agree with Christobale.
It’s been explained over and over again.
You really should make at least a little effort—you’ll also find other valuable info that’ll save you from asking questions that have already been answered multiple times, often in great detail.
Best regards.
Converting a heavy-duty camper into a bus/coach/truck
François57 · 2007-06-07 · Message 3073 of 3214
yeah, there you go!
If you've got any other questions about the S53 in particular, feel free to DM me. I bought one, and there are a few of us owners on the forum.
Anyway, great choice for a first conversion.
Converting a heavy-duty camper van from a bus/coach/truck
Mrkonn · 2007-06-07 · Message 3074 of 3214
😉another S53
just goes to show, welcome aboard!
Converting a heavy motorhome into a bus/coach/truck
Djeck49 · 2007-06-07 · Message 3075 of 3214
Hi Patrick26!
I had a small question but it might be complex... We know it's going to get harder and harder to live in a truck while complying with the ever-tightening regulations. So I was wondering if it might be possible to register a bus in another country (like England, for example) so the conversions wouldn’t be subject to France’s "draconian" restrictions. I think this topic’s been discussed here before, but I can’t find the thread. Sorry in advance if it’s already been covered! 🙂
I’m about to buy the bus, and the French regulations are really stressing me out—I already live in a truck, and the rules and inspections are already tough and only getting tougher...
Thanks for any answers!
Have a great evening!
Converting a heavy-duty camper van from a bus/coach/truck
Hotware · 2007-06-08 · Message 3076 of 3214
Hi there,
First off, you need to register AND insure it in the same country (which means you’ll need a local address).
To register in a country, you’ve got to have legal residency there (so spend more than 6 months a year in that country).
What are the risks if you don’t?
Well, for starters, your insurance won’t cover you...
That means if you’re in an accident—even if it’s not your fault—you could be in a real mess!
Also, you need to have all your paperwork in order, so depending on the country, that includes a roadworthiness test and other local requirements.
If you get a fine and don’t pay it right away, your vehicle could be impounded.
A foreign vehicle will be checked way more often than a local one.
Finally, EU harmonization means we’re gradually getting the same laws everywhere. Those laws are there to protect you—and to protect the rest of us from you (roadworthiness tests, etc.).
Might as well think it through and do things by the book—it’s a bit of a hassle, but it’s doable!
Converting a heavy-duty camper van from a bus/coach/truck
Christobale · 2007-06-08 · Message 3077 of 3214
Personally, I’ve already insured vehicles I didn’t own, and it’s never caused me any issues...
Converting a heavy-duty camper van from a bus/coach/truck
GX47 · 2007-06-08 · Message 3078 of 3214
We're not talking about that, but about a vehicle registered abroad and insured in France.
Anyway, all of this is illegal, and if something goes wrong and the driver can't cover the damages, it's better for them that none of my kids are involved in the accident 🏴☠️🏴☠️🏴☠️
HERE, we can't recommend anything other than WHAT IS LEGAL!!! It would be really stupid to see this post closed because of three jokers who want to take advantage of the French system without assuming certain responsibilities—this comes up way too often here, in my opinion.
It's not against you personally, just so you know. I'm responding to a series of questions and answers that it would be best not to keep answering.
And yes, you're right about insuring a vehicle you don't own. My C25 has two insurance policies: one in my name and another with a different insurer in my father's name. Personally, I have 5 insured vehicles that I don't own, but all are approved and registered in France.
Converting a heavy-duty camper into a bus/coach/truck
Patrick26 · 2007-06-08 · Message 3079 of 3214
Totally agree with GX47!
Just legal advice and tips!
Skip the dumb stuff—our projects already take enough thought to comply with the rules we’ve had to study. We’re happy to share advice, but don’t ask me to figure out how to cut corners for your project!
Starting next week, I’m back to work on my bus, even though my morale isn’t great (thanks to that damn medical decision!). It needs to be finished quickly now. The upcoming change to seat and seatbelt laws, effective September 20, 2007, means if I haven’t completed the homologation process by then, I might as well toss my awesome bench seat!
Alright, here’s the breakdown for everyone:
From that date, a fundamental change in homologation rules kicks in. Manufacturers will be responsible for testing and proving their vehicles meet the latest standards, and they’ll be liable if anything goes wrong. No more loopholes for them when launching a new model! The *Mines* services will act like mobile customs, doing random checks!
What does this change for us? Not much for anything already covered by Veritas. If you’ve gone through it, Veritas certifies that the installer (us!) did a clean job following the latest standards—so it aligns with the new regulations.
But for seats and seatbelts, who among us can provide an UTAC document? No one! The only options left will be original seats facing forward or backward in their original mounts, with aftermarket seatbelts attached to the seat frames for those not already equipped (new ones with an invoice to show), or crash-testing and burning a duplicate of our living area (just the living area, not the whole bus!) at UTAC’s facility. Cost: around 1500 €!
For bodywork conversions like mine, you’ll need an invoice from a body shop with a SIRET number corresponding to professionals recognized for this type of work. Individuals won’t be able to do it themselves anymore!
Moral of the story: depending on where you are with your conversions and what you want to do, either speed up or change your plans!
Basically, approvals will soon be based on paperwork, not just vehicle inspections. The file will need to include a bodywork certificate from a professional, a Veritas certificate, and an UTAC certificate for seating! (No more folding seats, standing spaces, or longitudinal benches...). The *Mines* will decide whether to call you in for an inspection or not. They might approve the station wagon version based on the file alone and not even see the vehicle before it hits the market! Not bad, right?
But that’s for 2010/2012. For now, we’ll still have to show up, get the Veritas inspection, UTAC in some cases, their discretion in others, and a bodywork certificate only for structural modifications (not yet required for reupholstering).
Here’s the latest info...
I’ll post the new regulations on my blog as soon as I find them in plain language and convert them to PDF so you can download them.
DON’T ALL RUSH TO YOUR LOCAL DRIRE OFFICES—AS USUAL, THEY MIGHT NOT BE UP TO SPEED FOR ANOTHER YEAR OR TWO...
PATRICK26
Converting a heavy-duty camper van from a bus/coach/truck
Pseudo57 · 2007-06-08 · Message 3080 of 3214
Hi François,
I live near Thionville, and since I just bought a PR14, I’d love to meet up sometime to chat about our projects.
Have a good day, even though there was a big storm today.
Jeff