in Thèmes › Voyager en camping-car
Converting a heavy-duty bus/coach/truck into a motorhome (page 155 of 161)
Discussion started by Patrick26 on 2004-06-14
3213 replies
This thread has been translated into English.
Converting a heavy-duty motorhome into a bus/coach/truck
GX47 · 2007-06-08 · Message 3081 of 3214
😉 ha, lucky it's you posting this, because when I announced it in January (well, I've known since November), quite a few people here made fun of me! 😠 I even read "office gossip" 😠
Now maybe some on the forum will take me a bit more seriously 😇😛 or at least not for a clown...
You saw it—I wasn’t saying much more, I was waiting for September (not October like a pro announced) to hear it confirmed from bad experience...
Learn that people in the showbiz industry (not those hanging around it...) know A LOT of things before everyone else... and Pat won’t contradict me on that 😉 it’s up to you to take advantage when I take the risk, because there is a risk (for me, of course, not for you)
PS: Since Tuesday, I’ve had the general terms for my Master homologated CC with 6 seats (2 transverse, 1 jump seat) 😏😏😏 HAP-PY
Converting a heavy-duty motorhome from a bus/coach/truck
François57 · 2007-06-08 · Message 3082 of 3214
Whoa, what scares me the most—even more than cops—is Patrick and François’s kids (GX417) lol. If they end up under my wheels or near my coach when it blows up, I’m in for a rough time 😉.
Joking aside, I think even though I’m doing my conversion in stages, it’s not that complicated. You just have to follow the rules. About seatbelts—I didn’t know this—but even vehicles from before 1999 need to be equipped if the seats weren’t original?
If that’s the case, it’s a bit of a pain. I know you can always have lap belts installed (or do it yourself), but do you need three-point belts? That’s trickier. Whether you do it yourself or hire a pro, there’s a big difference. Still, the hole will be the same, and so will the mounting. But in case of a crash, the worst part is they could always prove you didn’t install the belts correctly (though I install a kitchen better than the pros and no one yells at me if I burn the pasta—safety belts are a different story).
Otherwise, I haven’t made any chassis modifications (no holes in the frame rails). But a friend of mine cut all the frame rails under the floor at the back to fit a motorcycle through the rear cargo door (and raised the bed in the bedroom). I told him it was really risky, but before September 20th, he can still make a request to IRISBUS to modify this or that bar? (Because if I’m not mistaken, that’s the procedure: "Hello Mr. Garnier, may I convert my gorgeous, sturdy, and beautiful S53—since it’s from you—into a motorhome BY CUTTING THOSE FRAME RAILS?").
Anyway.
Pseudo57, get in touch with me—DM me your number and MSN, and we’ll meet up whenever you want. Later.
Converting a heavy-duty camper van from a bus/coach/truck
MrvolvoB10M · 2007-06-09 · Message 3083 of 3214
Hello everyone,
and yes, I'm still around. I haven't written much on the forum because I don't see the point in answering the same questions fifty times when they've already been asked.
Example: how many pages were needed to explain the difference between a C and D license?
I'm not attacking anyone by saying this!
Pat, I'm sorry and I apologize to everyone for not trying to cheer you up. I'm really not good at that kind of thing, but I'm happy (and I'm sure I'm not the only one) that you're keeping your baby.
After all, it's largely thanks to you that we're all here.
Hey François57, now there are three of us in Lorraine!!!!
Okay, I've said what I needed to say. Just so you know, I finally got my metal sheets and I'll start paneling in the next few days.
Oh, and I almost forgot—regarding the person who wants to drive outside the law, you know, I'm only 10 km from Belgium. I have family in Belgium. I could easily register it there. But you see, I'm still trying to do things properly and legally!!!!
Hoping I haven't made any enemies on the forum.
Converting a heavy-duty bus/coach/truck into a motorhome
GX47 · 2007-06-09 · Message 3084 of 3214
😄 LOL 😄😄😄 Don't worry, guys, they'll probably make them wear fluorescent vests with "Caution: kids on board GX47/PATRICK26" written on them 😄😄😄 Plus a siren on their heads 😏
About the info on seats and seatbelts, I don’t remember when I let it go—around January?
Regarding seatbelt fixings, back in March 2005, Heuliez told me they wouldn’t give me a downgrade certificate if I added seatbelts because the bus (structure) wasn’t designed for that 🤪
I just got my Master’s approval, the NEW seatbelts were there but not installed. The inspector forbade me from doing it ("We don’t do whatever, however anymore"). If there aren’t any, he applies the law for vehicles put into circulation before January 2000 (no obligation for rear seatbelts). If I install them, he’s at fault with the current regulations as of September 🤪
For info, it’s the same inspector who told me in 1999, when I asked what to use and the dimensions for the reinforcement plates at the seatbelt anchor points, that big, wide washers could do the trick. 😐 Things change... and it’s true it’s not fun, especially on this point. I still don’t know now that the Master’s approved whether I should install the seatbelts or not. I think yes because for me, it’s better than nothing, and the text says "no obligation"... so not forbidden? 😮
Totally agree with you about the structure or the holes being the same.
For the structure, you see a lot of S53s with the back open, yet it’s a trellis 🤪. I knew a retired coachbuilder who refused to open up a GX37 for me and refused to widen the opening of the GX47 (even though Heuliez was okay with it, but he strongly advised me to go to the PL coachbuilder in my town because he knew their work—but the cost... 😠)
🙁 The DRIRE inspector confirmed that RTIs would gently disappear, much to his regret 🙁 (because it’s his thing). Well, there are still a few good years left.
Converting a heavy-duty camper van from a bus/coach/truck
Patrick26 · 2007-06-09 · Message 3085 of 3214
In the same vein as the seatbelts, I remember the third brake light on American vehicles!
The authorities didn’t want us to cover it up—we had to remove it! And one day... it became mandatory!
GX, for your seatbelts, the regulations don’t care about the size of the plates for a simple reason: they state that the attachment must be made to the seat frame!
Basically, you’re not strapped to the bus, but to the seat—only to the seat! They consider that in those years, the seat attachments were sufficient for the weight of the seat and its occupant. The regulations also consider that a "seat" attachment is OK as a seatbelt attachment.
On the other hand, studying (or validating) plate sizes and resistance to tearing through a floor—I get why they’re not taking the plunge!
PATRICK26
Converting a heavy-duty camper into a bus/coach/truck
Jerry59 · 2007-06-09 · Message 3086 of 3214
Hi Fr159, I’m from Lille and I’m looking for a Renault FR1 coach.
Do you have any addresses where I can find one that’s not too expensive and in good condition?
Thanks in advance.😇
Converting a heavy-duty camper into a bus/coach/truck
Hotware · 2007-06-10 · Message 3087 of 3214
About seatbelts, I was wondering about using space-4 seats:
Integrated 3-point belt, pretensioner.
However, mounting on rails...
Has anyone already looked into this?
Converting a heavy-duty camper into a bus/coach/truck
François57 · 2007-06-10 · Message 3088 of 3214
Theoretically, the issue will be the inspection of the seat's attachment to the vehicle. You should check with a coachbuilder, but the most experienced members of the forum will give you a precise answer on this.
Converting a heavy-duty camper van from a bus/coach/truck
Patrick26 · 2007-06-10 · Message 3089 of 3214
Look into the seat and seatbelt regulations and the section on fixings, which you can download from my blog. Also, check with FR159 to see how it went for their Scenic seats (roughly the same type!)
PATRICK26
Converting a heavy-duty camper into a bus/coach/truck
Patrick26 · 2007-06-10 · Message 3090 of 3214
That's it, I've found the little brother of the bus!
A small camper van to go on family holidays, while waiting to be able to drive my bus again (damn medical ban that's suspended my heavy-vehicle licenses!).
A Hymer integral on a Mercedes 308D chassis, 120,000 km, 6 seats, new clutch and brakes, and a fresh paint job. Original interior with covers redone 5 years ago. The thing is 20 years old and I'm getting it for 5,000 €!
At that price, there's nothing else like it—you'd normally have to pay around 9,000 €. The only issue is that it's got German papers, but I checked with the mechanic who works on my Mercedes, and he assured me everything's there to get it registered in France, and he promised to help if there are any problems....
I'm picking it up on Wednesday. That's one weight off my mind—this summer's holidays won't be ruined!
So, with a bit more peace of mind, I'm getting back to work on the bus I'd put aside lately...
PATRICK26
Converting a heavy-duty camper van from a bus/coach/truck
Patrick26 · 2007-06-10 · Message 3091 of 3214
By the way, I don’t know what you call your little rolling homes, but for us, from the start, it’s been "the camping bus camper van," and we’ve been looking for a name—well, a first name—something fun and catchy!
And well, we’ve found it (after 2 years of ideas pulled out of a hat that only half-worked!): it’ll be ARVIK!
But no, I’m not gonna make you guess—I’ll explain...
Given the size and color of the bus and its future decor, this name fits like a glove. In fact, in Inuit, it means "blue whale"!
So, what do you think? And what do you call your trucks?
PATRICK26
Converting a heavy motorhome from a bus/coach/truck
GX47 · 2007-06-10 · Message 3092 of 3214
Before you risk making a huge mistake, go see Véritas.
The one in Maine-et-Loire/Sarthe almost systematically rejects German and Belgian gas systems because of different gas standards (especially if it's 20 years old). Plus, in those countries, gas pipes can be made of iron, which will require a complete overhaul.
Double-check everything before bringing it back, because for French registration, you'll need to go through Véritas.
Converting a heavy-duty camper van from a bus/coach/truck
Hotware · 2007-06-10 · Message 3093 of 3214
I don’t think a gas pipe is gonna stop Patrick! ;)
Converting a heavy-duty camper van from a bus/coach/truck
Hotware · 2007-06-10 · Message 3094 of 3214
I’d already read that standard (unreadable, but oh well...)
Basically, the Renault system is an all-in-one seat and a rail (bolted down).
The question is what the DRIRE requires for the adapter plate, kinda like the one you installed in your coach to fit the bench seat.
I’ll reach out to FR159 privately and check with a coachbuilder as a last resort.
Thanks,
Marc
Converting a heavy-duty camper van from a bus/coach/truck
Christobale · 2007-06-11 · Message 3095 of 3214
I don’t think HYMER bothered making different builds for France or Germany... Plus, on other points, they were even stricter than we are...
Outfitting a heavy-duty motorhome in a bus/coach/truck
Gasmobil · 2007-06-11 · Message 3096 of 3214
Hi there.
When I bought my new small motorhome (VL), it was delivered without a gas installation in the cylinder compartment.
The regulator was installed by my dealer. I think each country has its own regulations for regulators, millibars, flow rates, and all that.
For the part after the regulator, I do think it’s common to all motorhomes.
Best regards.
Converting a heavy-duty camper van into a bus/coach/truck
Djeck49 · 2007-06-11 · Message 3097 of 3214
Thanks everyone!
Just to steer the discussion back a bit, I wanted to clarify that I wasn’t looking for an illegal solution... There are plenty of areas where you can do things without going through standard procedures that aren’t considered illegal. Maybe there was a subtle way to simplify our paperwork system? Anyway, thanks for the clear answers. So, it’s not possible to bypass it—what a shame. I guess I’ll just have to step on it to catch the bus!
Have a great day, everyone!
Setting up a heavy motorhome in a bus/coach/truck
MrvolvoB10M · 2007-06-11 · Message 3098 of 3214
Hey Pat, if you're heading to pick up your Hymer in Germany, you'll definitely pass close to where we are. François 57 and me.
Just so you know, I have a friend about 10 km from my place who bought his light motorhome in Belgium and only had to make one or two tweaks.
So it's definitely doable.
Have fun everyone
David
Setting up a heavy-duty motorhome in a bus/car/truck
Patrick26 · 2007-06-11 · Message 3099 of 3214
For the little brother of the big one (the Hymer motorhome), no problem—I'm buying it in France and the previous owner provided me with a TUV certificate for the gas system that includes the mention of 'European validity'.
Apart from that, I'm getting back to you all about meetup number 2!
We talked about it on page 121, and then nothing.
I proposed different ideas, but at first glance, it didn't catch on, so I'm trying something else!
What if we did it as close as possible to the geographical center of France?
I searched and found a complex that can accommodate large motorhomes, small ones, and it has camping, hotel, and vacation rental cottages!
And plus, they have seminar rooms and I had a great contact!
All that's left is for gx47 to go check it out in person very quickly (I know, I'm not asking for his opinion, but to my knowledge, he's the closest—Valerie, who I spoke with on the phone, told me it's 3/4 hour drive from La Flèche!), to make sure it'll work well!
I'm giving you the link to their website for a virtual tour:
http://www.domainedesthomeaux.frPlenty of activities on site, equipped meeting rooms, almost at the geographical center of France (a bit to the west, that way nobody can say they're the farthest away), TGV not far off, honestly, I can't do better!...
For dates and reservations:
Arrival possible from Friday, July 13 during the day.
Everyone will make their reservation directly for a spot named as follows: bus (for vehicles over 10m), motorhome (for CCVL), tent, or hotel or cottage. I'll give you a group name to attach to your reservation (like 'motorhomes travel' for example, that sounds good), which depending on the numbers, will give us group discounts!
So, count yourselves in, for heaven's sake! Are we going to pull this off or not! And no more excuses for you folks from Brittany and the North!
Let's first count in here on the forum (I'll keep the tallies), and if it looks good, we'll really commit to it....
PATRICK26
1 MOTORHOME
2 ADULTS
3 CHILDREN
ARRIVAL: Friday evening late
DEPARTURE: not before Monday morning
Setting up a heavy motorhome in a bus/car/truck
Hotware · 2007-06-11 · Message 3100 of 3214
That works perfectly for me distance-wise, 5 hours of driving is still reasonable ;)
You can count me and my wife in
I'm thinking of booking a holiday rental on site. If anyone wants to share it with us, we have 2 spots available (€133 for 3 nights for 2)