in Thèmes › Voyager en camping-car
Converting a heavy-duty bus/coach/truck into a motorhome (page 159 of 161)
Discussion started by Patrick26 on 2004-06-14
3213 replies
This thread has been translated into English.
Setting up a motorhome in a bus/truck/coach
François57 · 2007-06-21 · Message 3161 of 3214
ok, yes so I took the opportunity to completely overhaul the whole setup (fed up with lifting 30kg components to swap them and charging for days on end): 2 new 12V 120A.h batteries + 2m of wiring including terminals (8 euros per meter + 2.50 euros per terminal + 7 euros for the connecting cable between the 2 batteries) + 1 battery disconnect switch to completely cut off the bus circuit (50 euros). all in all about 320 euros. it's unfortunate, because it's an expense I hadn't budgeted for. but anyway, I now have a solid system.
I'm left with 9 6V batteries in my garage (4 of which were given by a VoyageForum member! lol) and the right connectors. if anyone's interested...
thanks, Patrick for the Webasto documentation.
Setting up a motorhome in a bus/coach/truck
Christian06 · 2007-06-21 · Message 3162 of 3214
For anyone interested, there's a post on VF by titi77:
http://voyageforum.com/v.f?post=1138223#1138223
Converting a heavy-duty bus/truck into a camper van
Cunni · 2007-06-21 · Message 3163 of 3214
Setting up a heavy mobile home in a bus/coach/truck
Franois · 2007-06-22 · Message 3164 of 3214
In my last message I forgot to mention 2 things;
I also installed 2 solar panels (12v in series) and the inverter manages the charging.
To couple the batteries when the engine is running, I used a simple industrial three-phase contactor with a 24v control coil, and I wired the 3 contacts together. Plus, if you have trouble starting the engine, you just need to power the coupler and the 'cell' batteries help start the motor (after a prolonged stop or if you forgot to turn off the headlights, for example). This way you can use cheaper or older batteries just for engine starting.
Cheers
Setting up a heavy motorhome in a bus/coach/truck
Mrkonn · 2007-06-24 · Message 3165 of 3214
😉Hi,
Sorry about the second meet-up, it's off for us🙁
Setting up a motorhome in a bus/coach/truck
Hotware · 2007-06-25 · Message 3166 of 3214
You know, given the number of participants and the fact that the site's not truck-accessible, I think it's off ;)
Setting up a heavy-duty motorhome in a bus/coach/truck
Kamizol · 2007-06-25 · Message 3167 of 3214
Setting up a Heavy-Duty Motorhome in a Bus/Car/Truck
François57 · 2007-06-26 · Message 3168 of 3214
Hey, you live in Saviem? That's funny, where is that? 😉
Converting a heavy truck/coach into a motorhome
Kamizol · 2007-06-26 · Message 3169 of 3214
It's in department S53, just next to MAN, when you pass by Renault...
Converting a bus/coach/truck into an RV
Boniz38 · 2007-06-26 · Message 3170 of 3214
Hey everyone!
It's been a good while since I was last on the forum—about ten pages behind, but it's okay, not too bad—just took me 3 hours..😇 Patrick, what you're going through really isn't cool, but I'm relieved you're not selling Arvik..😉
We've gotten back to work and it's progressing pretty well. I just have a quick question about the furniture angles: what's the standard again? I can't find the AFNOR guide that was lent to me.
Thanks everyone.. see you soon!
Boniz
Fitting out a heavy motorhome in a bus/coach/truck
Gasmobil · 2007-06-26 · Message 3171 of 3214
Hello.
It's on page 19, everything is explained about this standard.
Article 3.8.2
The parts located near seats used while the vehicle is moving must not have any dangerous protrusions or sharp edges. The edges of elements surrounding the seating areas, when the vehicle is in motion, must have a radius of curvature of at least 3.2 mm or must be covered with energy-absorbing materials.
Regards.
Fitting out a motorhome in a heavy truck or bus
Fr159 · 2007-06-26 · Message 3172 of 3214
Hello everyone
Gasmobil meant to write 3.2 cm or 32mm 😉
Fitting out a heavy motorhome in a bus/coach/truck
Gasmobil · 2007-06-26 · Message 3173 of 3214
My bad

!!!
Please give me a break😕.
It's indeed 3.2 cm !!
Setting up a motorhome in a heavy vehicle (bus/coach/truck)
Hotware · 2007-06-27 · Message 3174 of 3214
Your proposal is interesting, but you didn't specify the village, TGV access, etc...
Plus, you'd need about ten people—with just 3, it doesn't work as well ;)
Setting up a heavy-duty motorhome in a bus/coach/truck
Melvde · 2007-06-27 · Message 3175 of 3214
Hello Patrick,
I've read your message carefully.
I'm a journalist for Zone Interdite (M6), and I'm preparing an investigation for a documentary scheduled to air in summer 2008. It's a show about passions and ambitious projects from enthusiasts. In this context, I would like to follow campervan enthusiasts who have a project to undertake this year that we could document. For example, custom fitting out of the vehicle (innovative work, original ideas)—the aim is to follow a human story from its preparation to its completion.
If this project interests you, or if you know anyone who might be interested, please don't hesitate to contact me.
This request is very urgent, and I hope to hear from you as soon as possible.
Best regards,
Mélanie van der Endemelvde@msn.com
Setting Up a Heavy Motorhome in a Bus/Coach/Truck
Boniz38 · 2007-06-27 · Message 3176 of 3214
Hi,
Thanks Gazmobil for the response, but: on page 19 the text says 3.2 mm which already seems reasonable.. 3.2 cm that's a pretty big radius of curvature...?
Cheers and thanks for your explanations about the batteries..😉
Setting Up a Heavy-Duty Camper in a Bus/Coach/Truck
Jose6440 · 2007-06-27 · Message 3177 of 3214
hello everyone
we're going to become stars!!!😎
more seriously, I'm looking for a 12/24 220V 1500-2500W converter, a switching charger with floating 24V, and 2 deep-cycle batteries of about 130Ah.
If anyone knows where we can find this kind of equipment at a reasonable price, thanks to all
cheers jose
Building a motorhome conversion in a truck/bus
Pandrée · 2007-06-27 · Message 3178 of 3214
Hi everyone
José, you can find chargers/converters (12v or 24v to 230volt, 2000w or higher) at MASTERVOLT - phone 04 93 902 902 or 06 62 29 648 (technical manager)
I've installed a MAS combo 12/2000/100 - 12=voltage 2000=watts at 230volt, supports peak 4000 watts, 100=ah charger.
The charger has three stages: bulk, absorption, and float
Do you have a photo of the charger/converter on your blog
Setting Up a Heavy Camper in a Bus or Truck
Gasmobil · 2007-06-27 · Message 3179 of 3214
Hi.
So the 32 mm or 3.2 cm is the curve you'd add to a table corner, for example, instead of a right angle. Of course, it's impossible to apply this to all profiles.
Best regards.
Fitting out a heavy motorhome in a bus/car/truck
Kiki03 · 2007-06-27 · Message 3180 of 3214
Hello everyone.
Kamizol's site is called "the Pont des Piles site" in the town of Cuizon (36190). There's already been a Mercedes meet-up there.
It's near Argenton sur Creuse. It's 116 km from my place (03100 Montluçon).
I'm definitely planning to join in even though I'll be in a caravan.
Patrick26, like many others, I'm with you wholeheartedly through this difficult time. But one more question for you:
Where do you stand with the association project?
For the July 14 meet-up, can we get more information? Do we need to sign up or prepare anything (questions, paperwork to prepare...)?
All the best to you all and keep up the good work! Thank you for your commitment.