Back to the discussion

in Thèmes › Voyager en camping-car

Converting a heavy-duty bus/coach/truck into a motorhome (page 160 of 161)

Discussion started by Patrick26 on 2004-06-14

3213 replies

This thread has been translated into English.


Setting up a motorhome in a heavy truck/coach/bus

Kiki03 · 2007-06-27 · Message 3181 of 3214

I made a mistake, it's CUZION 36190 and not Cuizon. The site should be on the D45 or D72.

Cheers

Converting a Heavy Motorhome in a Bus/Car/Truck

Hotware · 2007-06-27 · Message 3182 of 3214

In my case, it goes from 4h30 of driving to 7h30—that's pretty huge as an increase! I also don't see easy train access either :/

Converting a heavy-duty camper in a bus/car/truck

François57 · 2007-06-28 · Message 3183 of 3214

Honestly I'm not sure, but just go with a bus then 😉, with enough determination you can make it work anywhere

Setting up a heavy motorhome in a bus/truck/coach

Kamizol · 2007-06-28 · Message 3184 of 3214

Personally, I hadn't thought about the Saint-Chartier festival which takes place during this period and which I participate in... Nothing prevents you from meeting up at Pont des Piles of course... The best thing would be for you to come to this festival, which is the European gathering of luthiers and master bell-ringers...

Otherwise, contact the town hall of Cuzion or the tourist office of Eguzon or else the SIVOM of Eguzon (municipal community)... But in my opinion, the best thing to do is come to Saint-Chartier... It's 60 km from Argenton-sur-Creuse, next to Issoudun more precisely...

Setting up a motorhome in a heavy bus/coach/truck

MrvolvoB10M · 2007-06-29 · Message 3185 of 3214

Hi everyone,

I have a small concern about the Afnor book. After reading gasmobil's post, I'm wondering if I bought the right book.

Actually, my book doesn't discuss furniture angles on page 19!

It's a white book titled "Motorhome Outfitting / Comfort and Safety of Occupants"

It covers standards S56-111, S56-320, S56-203, and D35-358.

All the best to everyone.

Setting up a motorhome in a bus/coach/truck

Mrkonn · 2007-06-29 · Message 3186 of 3214

😉Hey everyone,

MrvolvoB10M, that's the good book you have, but it talks about page 19 of this discussion😛

Setting up a heavy-duty motorhome in a bus/coach/truck

Gasmobil · 2007-06-29 · Message 3187 of 3214

Hey B10M. You can read and reread your damn book, but you won't find that in there. However, normally it's in black and white in the E27 folder that DRIRE sent you if you requested it. That's what they send us, even though it's meant for light vehicles.

Regards.

Setting up a heavy campervan in a bus/car/truck

Jose6440 · 2007-06-30 · Message 3188 of 3214

hi pandrée

thanks for your reply, but I just got pricing straight from a wholesaler—much cheaper! example: a 50A charger combined with a 2500A converter, 3000W for 30 min, 5000W for 5 sec + solar panel regulator for just over €1000 HT, pure sine wave if anyone's interested?

catch you, jose

Converting a heavy-duty motorhome in a bus/coach/truck

Patrick26 · 2007-06-30 · Message 3189 of 3214

yeah, at that price I'm interested!

pass on the info José!

PATRICK26

Converting a bus or truck into a motorhome

Axel84 · 2007-06-30 · Message 3190 of 3214

Hello everyone, I'm new here. I need your advice because I want to convert a Renault 8 bus, 5 meters long, and here are the problems I'm worried about running into. It's an old blood donation bus.

First concern: It was rebuilt by a professional company called "Brevet", but it's always passed inspection since then, even though it's not officially registered as modified because the conversion isn't mentioned on the paperwork.

Second concern: It's from 1999 — will I be forced to meet strict standards to convert it the way I want?

And finally: It hasn't been declassified as VASP yet.

Am I getting in over my head with this, what do you think? Thanks in advance

Converting a bus, truck, or van into a motorhome

Hotware · 2007-06-30 · Message 3191 of 3214

I'm interested in that too !

Setting up a heavy-duty motorhome in a bus/coach/truck

Gasmobil · 2007-06-30 · Message 3192 of 3214

ERRATUM!!! A thousand apologies, I should have verified before putting such an error online. It was indeed 3.2 mm radius. I finally found my original document again. For my penance, I'm going to retranscribe the entire relevant paragraph.

Interior fittings: - Interior fittings must comply with the December 19, 1958 regulation concerning the modification of motor vehicles. Parts located near the seats must not have dangerous edges or sharp corners. The edges of elements surrounding the seating areas, during vehicle movement, must have a radius of curvature of at least 3.2 mm or be covered with energy-absorbing materials.

There, the rest we know—it's for 100 L tanks, the fire extinguisher, and NF S 56-200.

Plus I found this in my 1994 "do-it-yourself" special issue about motorhomes already, but not heavy-duty vehicles. It's an idea that's been rattling around in my head for quite a while, just over 13 years.... 🤪

Best regards.

Setting up a heavy motorhome in a bus/truck/coach

MrvolvoB10M · 2007-07-02 · Message 3193 of 3214

Hi everyone,

Man, I really messed up !!!

I was convinced we were talking about the book.

Anyway, no big deal—I've probably made some people laugh.

Catch you later.

Fitting out a campervan in a heavy-duty bus or truck

Fr159 · 2007-07-02 · Message 3194 of 3214

Hello everyone

Don't be as confused as Gasmobil, anyway I'm not and I'm not even ashamed...😏 I was convinced it was a typo, when I think that I had to take it all apart and cut it all again😕 I'm annoyed But I still have some concerns, as far as I'm concerned I'm incapable of creating a 3.2 mm radius on laminate😏 it will break right away or else you need moldings that are already the right size or you need to know how to work with wood like Pandree and I tip my hat to him here😉 me, I don't know, I have my limits. 3.2 mm doesn't that seem like a strange measurement to you?? it's not 3 or 3.5 but 3.2 are we working to the nearest tenth of a mm??? Now you need calipers or a micrometer?? Well then I really think the one who came up with this has a problem, that's why I won't apologize. In any case, for an amateur like me, it's much easier to create radii larger than 3.2 mm, of course. As for the 100-liter tanks, these aren't for heavy trucks (HGVs), otherwise you'd have to change the original fuel tanks.

See you soon

Customizing a motorhome in a bus/truck/coach

Jcteam · 2007-07-03 · Message 3195 of 3214

For sale: 1988 Volvo C10M, stainless steel chassis, new batteries, new air tanks, manufacturer's conversion authorization, conversion underway. Selling due to new baby. Price: 11000.

Setting up a heavy motorhome in a bus/coach/truck

François57 · 2007-07-03 · Message 3196 of 3214

Yeah, as long as the equipment is near the seating areas—in my case that only affects the 2 corners of the table facing the hallway. A jigsaw cut and you're done. Then you just run some edge banding over it, same as around the table perimeter, and that's all.

For the tanks, wouldn't there be a trick—like, say, some chassis mounting constraint (approved by the manufacturer, of course)? Don't truck fuel tanks already come compartmentalized from the factory (like 100+200+100)?

Catch you later.

Isn't that Volvo actually a B10M? Got any photos?

Later.

Converting a heavy-duty motorhome in a bus/coach/truck

Jcteam · 2007-07-03 · Message 3197 of 3214

The Volvo is a C10M with the engine mounted in the center of the chassis, which is stainless steel.

Setting up a heavy motorhome in a bus/car/truck

François57 · 2007-07-03 · Message 3198 of 3214

Stainless steel chassis? Whoa, that's wild—totally indestructible then? So no need to worry about rust like some lucky Volvo owners! 🤪

Converting a bus/truck into a motorhome

Jcteam · 2007-07-03 · Message 3199 of 3214

🙂 Nope, this bus doesn't know rust

Setting up a heavy motorhome in a bus/coach/truck

François57 · 2007-07-04 · Message 3200 of 3214

They're really lucky... were there a lot of buses with stainless steel chassis?

VoyageForum — the largest community of French-speaking travellers.