in Destinations โบ Asie du Sud-Est
Cost of building a house in Thailand? (page 6 of 9)
Discussion started by Jaturat on 2010-08-04
167 replies
This thread has been translated into English.
Cost of building a house in Thailand?
ChristianC64 · 2011-01-31 · Message 101 of 168
Well, I must be nearsighted—thanks for the info...
As for me, my search was fruitless... I don’t remember which BTS line, but there’s a Home Pro something-or-other, and it’s not great. That’s mainly why I have to head down to Phuket. The first province I chose was Ranong, and it’s the least populated in Thailand. My research said they sell gypsum in bulk there, but I didn’t see anything about it online. There’s no gypsum board in Thailand, but if you say so...
Actually, on Soi 91 past "On Nut," there’s a gypsum warehouse, but their products are only in bags. I’ll get to the bottom of it tomorrow. But I still need galvanized steel amounts... I’m not touching wood for now, even though I’m a cabinetmaker in my spare time...
During my three-week trip to Phuket, I checked things out, and the big Home Pro center there is really famous for tools, but I didn’t look into certain materials. Here in BKK, it’s all CONCRETE. Even where I’m from, we have 4' x 8' concrete sheets, half an inch thick. And this week, one more time in BKK—exceptionally—I swear I’ll get answers. After that, I’m heading south as fast as possible!!! ๐คช
Construction cost of a house in Thailand?
MengWan · 2011-01-31 · Message 102 of 168
Hi Christian,
Drywall sheets for walls and ceilings, called "placoplatre" in French-speaking Europe, are made in Thailand ๐
You can find them at all major building supply stores.
Hey Henri,
My ceilings are made with that ...
(Thai construction)Downside: it’s like a moisture reservoir!
๐
Cost of building a house in Thailand?
Hmh · 2011-01-31 · Message 103 of 168
HomePro specializes mainly in home improvements: kitchens, bathrooms, bedding, paint...
The merchants who sell bricks and cement also sell fiber-cement and plasterboard, which, oddly enough in Thailand, are installed on a wooden frame...
One material that’s really taking off right now is "wood cement." These are boards that work like wood and can be used both indoors and outdoors on metal frames, similar to plasterboard. Here are some manufacturers or resellers in Bangkok:
http://www.mahaphant.com/index.jsp
http://www.diamondtile.com/
http://www.siamfibrecement.com/index.phpHappy researching! ๐
@+
Cost of building a house in Thailand?
Hmh · 2011-01-31 · Message 104 of 168
Downside: it acts like a moisture reservoir!
Hi MengWan,
There are panels designed for use in damp areas that don’t absorb water. It’s clear that if you want to eliminate condensation in the gap behind your false ceiling, you’ll need to create openings to ventilate that space. If your attic is well-ventilated, you shouldn’t have any issues.
Cost of building a house in Thailand?
ChristianC64 · 2011-01-31 · Message 105 of 168
Well, good morning Henri-Michel, ๐
and thanks again... I'm getting there... are there any waterproofing membranes, maybe...???
Cost of building a house in Thailand?
ChristianC64 · 2011-01-31 · Message 106 of 168
Hello Christian,
Drywall sheets for walls and ceilings, called "plasterboard" in English-speaking Europe, are made in Thailand ๐
You can find them at all major building supply stores.
Hey Henri,
My ceilings are made with that ...
("Thai" construction)Downside: it’s like a moisture reservoir!
๐
In Quebec, we install a hatch right in the middle of the highest part of the roof so air can circulate... and ventilation happens... like in the attic, for example... but I don’t understand your issue if your roof extends beyond the exterior walls—you should have ventilation between the walls and the overhanging roof... the only word I can think of in English is... we install soffit in that spot... all around; but that’s not enough... it needs to breathe...
Cost of building a house in Thailand?
Hmh · 2011-01-31 · Message 107 of 168
Is there maybe some waterproofing membrane...???
What do you mean by a waterproof barrier?
If it's a waterproofing membrane, Sika, which manufactures in Thailand, sells PVC sheets for roofing and vapor barriers.
You can also find liquid waterproofing for concrete and all the additives to make mortar or concrete watertight. You’ll need to carefully control the quality, though, because workers tend to add huge amounts of water to make it easier to apply, which leads to massive shrinkage.
Cost of building a house in Thailand?
ChristianC64 · 2011-01-31 · Message 108 of 168
Is there maybe some waterproofing membrane...???
What do you mean by a waterproof barrier?
If it's a waterproofing membrane, Sika, which manufactures in Thailand, sells PVC sheets for roofing and vapor barriers.
You can also find liquid waterproofing for concrete and all the additives to make mortar or concrete watertight. You’ll need to carefully control the quality, though, because workers tend to add huge amounts of water to make it easier to apply, which leads to significant shrinkage.
Thanks...that was a question about a foundation that would sit 5 feet underground, so the slab after pouring and its strength...controlled irrigation with a French drain and a completed Canadian well installation...the waterproofing membrane needs to be installed before framing the basement floor...then afterward, the membrane goes up along the exterior walls that will remain in damp soil...brick could even work with a waterproofing membrane...from memory, it's about 8mm thick...but I'm not sure, I'll have to check...
If this product is also available here, this construction becomes easily feasible and still affordable...this method meets all the desired efficiency for keeping the house cool...
Cost of building a house in Thailand?
ChristianC64 · 2011-01-31 · Message 109 of 168
HomePro specializes mainly in home improvements: kitchens, bathrooms, bedding, paint...
The merchants who sell bricks and cement also sell fiber-cement and drywall sheets, which, oddly enough in Thailand, are installed on a wooden frame...
One product that’s really taking off right now is "wood cement." These are boards that work like wood and can be used both indoors and outdoors on metal frames, similar to drywall sheets. Here are some manufacturers or resellers in Bangkok:
http://www.mahaphant.com/index.jsp
http://www.diamondtile.com/
http://www.siamfibrecement.com/index.php
Happy researching! ๐
@+
RE Hey Henri-Michel,
My friend, you just saved me from my ignorance... SCG—I had no idea what it stood for! It’s the product I’ve always worked with in Quebec...!!!
And it means... SIAM CEMENT GROUP... well, we’re in business—no doubt in my mind now! I even found what I was looking for!!!๐ ... a gypsum board reinforced with a waterproof core and a fiberglass sheet... AMAZING, right?
So if my SCG drywall box costs me $15 in Quebec...??? and a regular gypsum sheet costs $10 there...??? Then how much will it cost me in Thailand from the manufacturer...??? I can’t believe how clueless I’ve been—I’ve always done renovations and construction with these products without even knowing they came from the country I want to move to!!! ๐๐๐
This just made my day—I bought a flight ticket to Phuket... Samui was too expensive ๐. I’ll be going straight to the island, but I’ll still come see you... and I’ll probably lend a hand to our friend Mengwan with his roof...
Ciao!
Cost of building a house in Thailand?
ChristianC64 · 2011-01-31 · Message 110 of 168
Are there maybe waterproof membranes...???
What do you mean by a waterproof barrier?
You can also find liquid waterproofing for concrete and all kinds of admixtures to make mortar or concrete watertight. But you need to carefully control the quality, because workers tend to add huge amounts of water to make it easier to apply, which leads to massive shrinkage.
Yeah, it’s probably due to the slow application... here with the heat, working with cement can’t be easy. And the thing is, cement "soaks up" water—Quebec slang, haha—so you constantly have to add more water. Then, during the final step, the "floating," to make it smooth and even, you have to bring the water back up... but not too much, or you’ll get "mishaps." Anyway, I think we get each other...
For finishing drywall—what you call "placoplรขtre," we say "plastering"—it’s the same deal. I wet my trowel and with a quick, smooth stroke, everything evens out... ๐ ...with water!
Construction cost of a house in Thailand?
Hmh · 2011-01-31 · Message 111 of 168
so you constantly have to add water...
MISTAKE!!!
By adding water to concrete or mortar that has naturally started its chemical reaction, you only significantly reduce its strength.
For tropical climates like Thailand, there are plasticizers, setting retarders, etc., that make it easier to use while maintaining optimal quality ๐. Of course, this comes at a cost. The plants in this country are well-equipped, but it's the site managers who insist on the mixer drivers adding water.
As for bringing the fines and cement to the surface, it's a trick, a cover-up that doesn't improve the product's quality.
Building physics, waterproofing in all its forms, concrete, construction materials—that was my job, and it still is because I'm passionate about it. It's my thing, Christian. I fell into it when I was little ๐
@+
Construction cost of a house in Thailand?
ChristianC64 · 2011-01-31 · Message 112 of 168
so you constantly have to add water...
MISTAKE!!!
By adding water to concrete or mortar that has naturally started its chemical reaction, you’re only significantly reducing its strength.
For tropical climates like Thailand, there are plasticizers, set retarders, etc., that make it easier to work with while maintaining optimal quality ๐. Of course, this comes at a cost. Plants in this country are well-equipped, but it’s the site managers who pressure the mixer truck drivers to add water.
As for bringing fines and cement to the surface, that’s just a trick—a cover-up that doesn’t improve the product’s quality.
Building physics, waterproofing in all its forms, concrete, construction materials—it was my job, and it still is because I’m passionate about it. My little world, Christian—I fell into it when I was a kid ๐
@+
Well ... no doubt about it, we share a passion... Thanks again for the info...๐...
Cost of building a house in Thailand?
ChristianC64 · 2011-01-31 · Message 113 of 168
so you constantly have to add water...
MISTAKE!!!
By adding water to concrete or mortar that has naturally started its chemical reaction, you’re just significantly reducing its strength.
For tropical climates like Thailand, there are plasticizers, set retarders, etc., that make it easier to work with while keeping its optimal qualities ๐. Of course, that comes at a cost. The plants in this country are well-equipped, but it’s the site foremen who insist that the mixer truck drivers add water.
As for bringing the fines and cement to the surface, that’s just a trick, a cover-up that doesn’t improve the quality of the product.
Building physics, waterproofing in all its forms, concrete, construction materials—that was my job, and it still is because I’m passionate about it. My name’s Christian, and I’ve been into this since I was a kid ๐
@+
That’s what I was saying... I’m definitely not the one who’s gonna mess with concrete!!!๐๐๐
Cost of building a house in Thailand?
Chauley · 2011-11-21 · Message 114 of 168
Hi there,
I’m in the early stages of planning to build a 170 mยฒ house. The blueprints are still being drawn up, and obviously, I’d like to move to the next step to get a price based on the plans... I need a precise idea, not just a range of 1 to 2 million baht.
Do you know anyone who could provide a detailed estimate? Of course, I’m happy to pay for their time.
Because I have no clue about the cost of building a 20 cm or 10 cm wall per mยฒ, roofing per mยฒ, etc.—whether that’s just materials or includes labor.
Stรฉphane (stephane.chollet@free.fr)
Cost of building a house in Thailand?
Thuan · 2011-11-21 · Message 115 of 168
hi .. it all depends on the location .. the same house isn’t priced the same everywhere in Thailand ..
plus, it’s the contractor you choose who can give you .. more or less the price. ๐.
Building a house in Thailand – what’s the cost?
Malo · 2011-11-21 · Message 116 of 168
For the price of a house in Isaan, you’ve got to ask bababobo. He’s building his 900 mยฒ place for half a bike and 14 baht without employing Burmese slaves.... The guy’s a god!
Bababobo for president!!!!!!๐
Cost of building a house in Thailand?
Chauley · 2011-11-21 · Message 117 of 168
Yes, I had no doubt about the master builder: for now, he’s drawing up the plans.
And then I’d like to have the final price checked by two people to cross-reference the information. You can understand that.
The house will need to be built in Soeng Sang. Not too close to Bangkok. However, if you know any great tips for windows, doors, etc., it’s not out of the question that I might consider having them transported...
Stรฉphane
Building a house in Thailand – what’s the cost?
Malo · 2011-11-21 · Message 118 of 168
Where you are, you’re looking at between 20,000 and 30,000 THB/mยฒ depending on the quality of the finishes. I’m talking Farang standard. Thai standard is cheaper.
Good luck!
Cost of building a house in Thailand?
Chauley · 2011-11-21 · Message 119 of 168
Okay, thanks! It’ll be a Thai-style finish with a ++ twist—somewhere between Thai and Farang. To be more precise: a house with posts, 20 cm exterior walls, 10 cm interior walls, a standard blue roof, etc. It’s a vacation home (I’m not picky), and it’ll be lived in by Thais year-round.
Next time I’m in Bangkok, I’ll check out the big-ticket items (like windows, etc.) to see if I can save on those.
Stรฉphane
Cost of building a house in Thailand?
Dilom · 2011-11-21 · Message 120 of 168
Okay, thanks. It’ll be a Thai ++ finish—somewhere between Thai and Farang. To be more precise, a house with pillars, 20 cm exterior walls, 10 cm interior walls, standard blue roof, etc. It’s a vacation home (I’m not picky) and will be lived in by Thais year-round.
Next time I’m in Bangkok, I’ll check out the big-ticket items (like windows, etc.) to see if I can save on those...
Stรฉphane
No need to go to Bangkok—Korat has everything you need. Stores like Global House or even local small contractors.
For a wall, budget around 1,500 baht per meter (smoothed) with a height of 1.80 m (10 cm Thai breeze blocks).