So, here's what to order:
angle grinder discs 10/10 gauge sheet metal brazing rods 2mm rods 2 liters of rust treatment fiberglass mat sauerkraut blackson 30 ml of cargo seals repaint the rims 4 hubcaps 200 sanding discs masking tape primer body paint and ... the 2 or 3 bits and pieces for the interior...
Still plan for 4 or 5 afternoons of work!😉
Well, the easy part's done, now the surprises start!
That's also what happiness is! (Do you remember when I was explaining my sheet metal at the back of the bus, which we ended up changing!)
But anyway, joking aside, you know what a truck is. Don't get carried away with the interior. In your place, I'd start by dealing with everything that's rotten or about to be. Cut it out, redo it, treat it, repaint it. After that, the interior is just details. Boards, pipes and wires. With a bit of cleverness and common sense, it always comes together, even in the rain. On the other hand, the bodywork is a mess! It's not complicated, but it's a mess! It's noise, dirt, welding (no welding in the rain, eh!), etc...
I know you're resourceful, but let yourself have fun with it! Do it in order! Like with a house, you take care of the walls first before laying the tiles!
One last thing, use chocks! Working level is heaven! Looking at your curtains in the photos, you're going to need a timber or two!😛
PATRICK26
angle grinder discs 10/10 gauge sheet metal brazing rods 2mm rods 2 liters of rust treatment fiberglass mat sauerkraut blackson 30 ml of cargo seals repaint the rims 4 hubcaps 200 sanding discs masking tape primer body paint and ... the 2 or 3 bits and pieces for the interior...
Still plan for 4 or 5 afternoons of work!😉
Well, the easy part's done, now the surprises start!
That's also what happiness is! (Do you remember when I was explaining my sheet metal at the back of the bus, which we ended up changing!)
But anyway, joking aside, you know what a truck is. Don't get carried away with the interior. In your place, I'd start by dealing with everything that's rotten or about to be. Cut it out, redo it, treat it, repaint it. After that, the interior is just details. Boards, pipes and wires. With a bit of cleverness and common sense, it always comes together, even in the rain. On the other hand, the bodywork is a mess! It's not complicated, but it's a mess! It's noise, dirt, welding (no welding in the rain, eh!), etc...
I know you're resourceful, but let yourself have fun with it! Do it in order! Like with a house, you take care of the walls first before laying the tiles!
One last thing, use chocks! Working level is heaven! Looking at your curtains in the photos, you're going to need a timber or two!😛
PATRICK26








and, of course, this plays tricks on my little family 🙁 who’d prefer I calm down a bit to spend time with them!
So, junior, it’ll be a pleasure.






