Posts by Kersode
About 46 results.
More options
Search results
Converting a heavy-duty camper van from a bus/coach/truck
Hi, for now I haven’t followed up because I’m not at that stage in the conversion yet. The seller seems able to supply batteries without any time limit, which is good. What bothers me is the weight—200 kg per 350 A battery, with dimensions of 80 x 80 x 30. It’s probably possible to use 12-volt batteries for a lighter weight. The batteries are available in Finistère. See you soon!
Converting a heavy-duty camper into a bus/coach/truck
hi, looks like the batteries are Fulmen 24V 350 AH, dimensions 80 x 25 x 80, weight 204 kg!!!!!!, price around 75 €, all of this still needs to be verified. See you soon.
Converting a bus/car/lorry into a heavy-duty motorhome
Hi Patrick, I’m looking into my electrical setup and was wondering if there’s any downside in your diagram to replacing the four 12-volt batteries with two 24 V batteries. I might have a lead on some at reasonable prices. See you soon.
Converting a heavy-duty camper van into a bus/coach/truck
hi there, just a quick heads-up for tomorrow – my schedule’s changed a bit. I won’t be available all day except from 3 to 5 PM. If anything unexpected comes up, I’ll send you a message.
see you later
Converting a heavy-duty camper into a bus/coach/truck
Thanks for the reply! You used 40 cm skylights, no doubt?
Converting a heavy-duty camper van from a bus/coach/truck
hi there, you can reach me either Thursday between 11:00 AM and 12:30 PM or between 6:00 PM and 8:30 PM at the number I sent you in a PM. By the way, do you think it’s possible to cut the roof to install a skylight above the shower—on the left side of the middle door? José, if you know the answer, don’t hesitate!
see you soon
Converting a heavy-duty camper into a bus/coach/truck
Hi there, this weekend I’ll be tinkering with the coach. Could you take a look at the two private messages I left you or the one on your blog? See you soon and thanks in advance
Converting a heavy-duty camper van from a bus/coach/truck
Good evening, congrats on this amazing conversion!
Converting a heavy-duty camper van from a bus/coach/truck
like many of us, I’ve just started my travel journal because the conversion work is really about to begin:
http:/kersode.skyblog.com
See you soon
http:/kersode.skyblog.com
See you soon
Converting a heavy-duty camper van from a bus/coach/truck
Hi Patrick, and I’m glad your contributions are still so relevant! My project is moving forward slowly but surely. For the forward-facing seats, I’ve decided to use 4 original bench seats facing each other in pairs with a table in the middle. Like many others, I’ve settled for reversing two of the benches by turning them sideways. But obviously, I don’t have seatbelts, so I’d like to know if that could be a problem. I called the Nantes DRIRE (the regional transport authority I depend on), and there are two inspectors—one of whom sits on the commission that rules on matters like ours. He told me there are no planned regulatory changes for October and that the layout of my forward-facing seats works for him. But of course, a verbal opinion isn’t worth much—your take would be really helpful. And regarding the side benches you mentioned, those are just side benches used as forward-facing seats, right?
See you soon
Converting a heavy-duty motorhome from a bus/coach/truck
hi, I’m converting an FR1 like several others on the forum. One question: did you keep the fan that circulates the air? From what I understand, that’s why you have an air gap between the old ceiling and your plywood. Do you really think the existing insulation is enough? And finally, the last one for today—you placed a toilet cubicle between the back bedroom and the bunk beds. Isn’t it above the wheels? See you soon—I forgot the very last one: did you keep the windows you tinted? Do your twin beds share one window, or did you create fake windows in your lining? That *really* is the last one for today.
Converting a heavy-duty camper van from a bus/coach/truck
Good evening, first of all, I’d like to send Patrick my best wishes for a speedy recovery. Then, like many of you, I’ve been wondering about the upcoming regulation changes announced for September/October. Would it be possible to reactivate Patrick’s contacts at the DRIRE or the ministry to get a clearer idea of how the regulations might evolve? This could really impact our projects—both technically and in terms of timelines. I wasn’t planning to get mine done before late 2007 or early 2008.
Thanks in advance
Converting a heavy-duty camper into a bus/coach/truck
I called kerhervé and their prices are interesting even before any discussion. I'm still hesitating between your solution and cateludo’s—both raise questions for me. With yours, I’ve already painted galvanized metal with a high-quality metal paint, but it didn’t hold up well. I probably didn’t do what was needed. And the other option because 6/10ths gauge sheets might seem thin.
Converting a heavy-duty camper van into a bus/coach/truck
Good evening! Multiple opinions are enriching, but I don’t understand your conclusion "it doesn’t change much"—what do you mean?
Converting a heavy-duty camper van from a bus/coach/truck
thanks so much, I’ll probably have more questions later.
see you soon
Converting a heavy-duty camper van from a bus/coach/truck
GOOD EVENING, could you kindly tell me what the width of your bunk beds is? I assume 80 cm. I also previously asked what method you used to block off the windows you weren’t using. Thanks!
Converting a heavy-duty camper van from a bus/coach/truck
Thanks for the reply—what type of seats are we talking about? Also, I read your message about the new certification measures. Do you have any idea when they’ll come into effect?
Converting a heavy-duty camper van from a bus/coach/truck
Hi there, I’m potentially looking for FR1 seats and other parts if you have any—please get in touch. Thanks!
Converting a heavy-duty camper into a bus/coach/truck
Thanks for your reply! Did you choose the 1.5 mm thickness for technical reasons (weight, installation, etc.) or for cost reasons? Why didn’t you go with pre-coated sheets? Your sheets look galvanized.
See you soon!
Converting a heavy-duty camper into a bus/coach/truck
That’s a fun idea for sure, but more seriously—how thick were the metal sheets you used for your project last weekend?











