Search results
FR
More options

Keyword matching drives the results; the remaining options refine the query on the backend.

Many results are in French, the community’s main language. English translations are added over time.

Search results
Tirer une voiture derrière un camping-car
by SJunior · 2007-04-14 · 0 replies
Salut,

Vu ton besoin, opte pour un buggy (pgo, dazon...)... Prend contact avec Patrick26 il t'en dira plus... Les gros avantages : C'est plus stable qu'un quad, ça se conduit plus comme un kart. Homologation route sans avoir besoin d'un casque (mais je le conseille vivement !) et capacité tout terrain... Deux places côte à côte ! (prévoir un interphone entre vous, ça reste bruyant !) Certaines versions ont un point mort et une option de tractage direct : un timon et une plaque "remorque" immatriculée comme le tracteur et tu transformes le buggy en remorque bagagère de moins de 750 kg donc pas besoin de se ballader avec une remorque derrière ton cc !

Bonnes ballades !
Acheter des meubles déjà faits pour aménager un camping-car
by SJunior · 2007-04-14 · 0 replies
Salut,

Je ne connais pas d'aménageur qui vende son mobilier a part sachant que souvent il est fait sur mesure... Par contre tu devrais pouvoir trouver de la sellerie (fauteuils rotatifs, salon) chez les professionnels de l'aménagement. Prend contact avec loic, son pseudo est carriage (son site
http://www.carriage-rv.com/) il pourra peut être te conseiller et qui sait te fournir. Pour tout ce que tu peut trouver dans le commerce traditionnel ou en achetant des caravanes d'occas, ça peut être des bons plans, tout dépend de ton véhicule ! Dans tous les cas tu sera certainement amené à faire des modifs pour les fixer, les ajuster... Quelle est la base de ton home car ? (vl, pl, camion, bus, 4x4...)

Bon courage...
Converting a heavy-duty camper van from a bus/coach/truck
by SJunior · 2007-03-07 · 5 replies
Hey everyone!

It’s been a while since I last posted, but I really wanted to chime in here...

Let’s all take a deep breath for a sec! This thread was created to share info and tips on converting buses/heavy-duty vehicles while respecting regulations!!

I get it—reading through norms and regulations isn’t always fun, but the AFNOR guide isn’t just a dry rulebook. It’s actually pretty clear (with explanations and diagrams). That said, like any rule, the tricky part is how it’s applied. Depending on the *DIRE* (regional transport authority) and the department, you might get different answers. So yeah, there’s some interpretation involved, and everyone ends up with their own "truth." But some points are crystal clear and non-negotiable!

So, for those of you who want to turn your rigs into rolling fire hazards (reminds me of the early squabbles here) with wood stoves and non-compliant gas cookers—this isn’t just about safety vs. regulations! The "fear of the cop" shouldn’t be your motivation. Cut costs if you want, take the risk of losing *everything* if your truck goes up in flames—your call. But here’s the catch: it’s not just *your* problem. It affects other road users and the people you’ll be carting around in your clunker—your kids, friends, etc. If you’re doing this to save a few hundred euros, I don’t think it’s worth the risk! This isn’t about being open-minded; it’s about responsibility! If you’re diving into these projects with no budget, trying to convert "on the cheap," bit by bit, you’re making compromises that shouldn’t even cross your mind. If something goes wrong (and I really hope it doesn’t), what are you gonna say? "I get it, Your Honor, but I had a brand-new gas stove, so..." (I’m using this example, but I’m not calling anyone out specifically!)

Otherwise—and I hate to repeat myself—there’s no one-size-fits-all answer! There’s no "minimum build" for homologation (except that any empty space can be considered a cargo area, which triggers specific requirements). If you’re asking these kinds of questions, you’re probably approaching the project wrong. You’re not converting a vehicle *just* to get it approved—you’re doing it to live in it! And every use case demands different setups, which means different parts of the regulations apply. To simplify: If I’m traveling solo, in summer, for 15 days a year, in a hot country, and I only eat out, my build (and the norms I need to follow) won’t be the same as a family of five hitting the road every school holiday and every weekend, fully self-sufficient, etc. So stop asking broad questions that can’t be answered—be specific, clear, and detailed!

These projects take financial resources, patience, and time. Take the time to write readable posts (in proper French, no abbreviations) and don’t hesitate to go into detail!

Ask yourselves these questions, both for how you’ll *use* the finished camper and for the entire "construction" phase (buying and converting): Who, When, What, Where, and How

Anyway, happy building!
Converting a heavy-duty camper van from a bus/coach/truck
by SJunior · 2007-02-10 · 2 replies
Hey everyone,

Just a quick hello to say okay for the meet-up on March 10th (it’s far enough ahead that I don’t have anything planned yet, but too far to be sure I won’t have a conflict by then! 😉)

In the meantime, about insulating your buses, I’m adding to the info shared above: there seems to be a small misunderstanding about the air gap. It’s not supposed to go under or over the insulation but *between* the insulating layers! That’s the whole point of multi-layering! So I made a little sketch for you... (I’m trying to attach it as a JPG, otherwise I’ve uploaded it to the blog as a PDF:
http://motorhome.blogs-de-voyage.fr/isolation/)

I can confirm it’s better to glue your insulation with polymer mastic adhesive—otherwise, with double-sided tape, it’ll shift, fall off, etc., and you’ll lose efficiency. And forget about aluminum tape, except for small repairs!

For the air gap space, we used the bus’s structure relative to the outer metal sheet, which was about 4 cm. I can tell you there’s a real difference between the air temperature between the two layers and that of the inner wall! You can even feel where the mounting structures are (slight thermal bridging due to the lack of an air gap and slight compression of the insulation)!!!

See you soon!

By the way, I’m sensing a bit of slack in the writing of some posts 🤪—a little more care, please! 😉
Converting a heavy-duty camper van inside a bus/coach/truck
by SJunior · 2007-01-23 · 2 replies
Hey everyone, including the newcomers...

Just a quick update from Patrick—he’s doing okay, but he’ll tell you all about it better than I can soon... he’s coming back tomorrow, well, actually today... anyway, he’s leaving Montpellier on Tuesday around 2–3 PM... His first leg went well, but now he needs some rest, a bit of exercise to get back on his feet, and the next stage will be in a month.

Ciao
Converting a heavy-duty camper van from a bus/coach/truck
by SJunior · 2007-01-19 · 0 replies
Well, that looks like what Patrick had in mind! 🙂
Converting a heavy-duty camper van into a bus/coach/truck
by SJunior · 2007-01-19 · 0 replies
Here’s the info I have so far, but I need to go see Chazot soon—I’ll ask for more precise details.

Affected by this measure are: truck drivers of a vehicle over 7.5 tons occupying, for the first time, a truck driver position in a public transport company; individuals performing a non-driving role who are later assigned to a driving position; temporary agency staff provided to public transport companies to fill a truck driver role for a vehicle over 7.5 tons; drivers of companies transporting goods for their own account and self-employed transporters (under current regulations: collective branch agreements for the generalization of F.I.M.O.); drivers of companies transporting passengers.

Not affected are: holders of a professional diploma, the C.A.P. in road driving, the B.E.P. in driving and services in road transport, the C.F.P. for truck drivers, or the technical training certificate for transport professions (CFTT). Experienced drivers as of the publication date of the official texts (Framework Agreement of January 20, 1995, an integral part of the 1994 Progress Contract).

This excerpt seems to mean you’re required to have the FIMO as soon as you transport people or goods and are employed to do so. However, if you’re your own boss, it’s not very clear!
Converting a heavy-duty camper into a bus/coach/truck
by SJunior · 2007-01-19 · 0 replies
Greetings and welcome (back) to the club... Plume is right, half a centimeter really does matter! You’ll see when you start your conversion—sometimes 5mm makes all the difference!!!😉 Otherwise, like GX47 said, don’t hesitate to post, even if you don’t have all the knowledge—your ideas and experience count!
Converting a heavy-duty camper van from a bus/coach/truck
by SJunior · 2007-01-19 · 2 replies
Sorry jose6440, I’m not really up to speed on which hot water system we’ll go with... I know we looked at a few options, but I’d just be guessing if I tried to say more! And I don’t know what a marine water heater is...

Maybe Famillede8 remembers the chat he had with Pat about hot water tanks?
Converting a heavy-duty camper van into a bus/coach/truck
by SJunior · 2007-01-19 · 2 replies
Hi everyone, and thanks again for all your supportive messages. Here’s the long-awaited update:

The surgery was long and complicated, but Patrick was a "model patient" according to the professor who operated on him. After a short stay in intensive care, he was already moved back to his room yesterday. He’s awake, and his wife says he’s just like he was before!

So all is well—he won’t be away for too long! He’s already looking forward to hitting the road...
Setting up a motorhome in a heavy bus/coach/truck
by SJunior · 2007-01-17 · 7 replies
Hey wampas

Hard to answer your question because you're going about it backwards! The right approach is to ask yourself what you need in your setup to know what certification you'll get!

You'd need to give me more details—how many musicians are you bringing, who sleeps in the bus, who eats in there, how much gear you're taking...

Then you can put in whatever equipment you want; I don't know the limitations for getting 'caravan' certification in terms of equipment... And certification doesn't mean comfort, so no problem if there's no heating or insulation from that perspective! But if you want to keep it simple, why bother with another battery bank? It all depends on what equipment you put in it, and since your list doesn't mention any electrical equipment... On the other hand, if you want a loading area for your gear, you'll have to install a cargo barrier. By the way, for your gas you're not required to have an external container—it all depends on how your installation is set up!

I don't see how I can answer you more precisely without more details...
Setting up a heavy motorhome in a bus/coach/truck
by SJunior · 2007-01-17 · 0 replies
Hi MrKonn Good solution (in my opinion)😉 As for fixing your sheet metal once you've welded the reinforcements, you'll need to use a polymer adhesive-sealant. Don't buy the cheapest stuff, and definitely don't hesitate to 'invest' a bit. The brand we used isn't available in standard retail—it's a local company. For reference, Colmast from DACD at 20 euros per cartridge. But you can find an equivalent at places like Castorama or Leroy-Merlin.

Once you have it, apply a good bead everywhere (edges and your reinforcements) and press it down firmly. Avoid tapping/hammering it because that crushes the adhesive and the sheet metal just bounces back—then you have to start all over. The rivets are just there to hold the adhesive in place while it cures (72h to reach full strength), so you only need 2 rows of rivets (top and bottom)—you can hide them with a glued-on sill rail, for example.

As for rivet spacing, I'm not totally sure. You need to space them fairly tightly since you'll be compressing a lot with each attachment, so the best approach to avoid too much waviness would be to space them closer together. It all depends on how much effort you want to put in!😉 Personally, I'd space them about 10 cm apart.
Outfitting a heavy-duty motorhome in a bus/coach/truck
by SJunior · 2007-01-16 · 2 replies
Small correction for kersode

I jumped the gun trying to explain why 24V compressors are used for inflating tire doors when stationary, and it’s not quite right!!!

So here’s the correction: Pat has nothing against 220V compressors, but the only ones he found come complete with tanks and would require disassembly, whereas he found 24V ones ready to install... Plus, it’s better to connect them to the habitation batteries rather than the engine ones because they "draw quite a bit of power," and if you don’t turn on the "habitation" circuit, you can still start the bus to inflate your tanks (since it’s a system that complements the existing circuit). Also, by connecting them to 24V instead of 220V, you avoid having to turn on all your 220V accessories just to inflate your doors during winter storage...

That’s the small correction.
Converting a heavy-duty camper into a bus/coach/truck
by SJunior · 2007-01-16 · 0 replies
A big thank you to Patrick for your messages of support. I’ll try to share the "master’s teachings" while he’s away... 😛

Just a quick update: the operation was originally scheduled for January 23rd, but it’s been moved up, and Pat is leaving for Montpellier today—his operation is tomorrow...

You can count on me to keep you posted as soon as I know how things go for him. In the meantime, send him all your positive vibes! Thanks again to everyone
Converting a heavy-duty camper into a bus/coach/truck
by SJunior · 2007-01-15 · 37 replies
Hey wampas, To drive your bus as quickly as possible... get your D license! 😛 Just kidding, but your questions have already been discussed and answered in various ways in this thread, so I suggest you (re)read the posts starting from page 19!!!

A little extra info for kersode: if Patrick is talking about a 24V compressor, I think it’s for an independent setup (using the engine batteries, which means when you put it "in winter storage," you can turn off all your batteries, and if you need to, you just restart the engine batteries to use your doors).
Converting a heavy-duty bus/coach/truck into a motorhome
by SJunior · 2007-01-15 · 53 replies
Hey kersode,

A few details about your electrolysis issue. First off, are you sure it’s aluminum? I’m surprised—aside from the doors, the cladding panels are usually electro-galvanized steel… but I could be wrong!!!

As for electrolysis, you’re not at risk. It’s mainly an issue for our seafaring friends. Without going into too much detail, it’s a galvanic reaction (between two different metals in an electrolyte: acidic, alkaline, or saline solution). So it only happens in a marine environment. Plus, the bond between aluminum and steel is pretty weak. Last point—since your bodywork is grounded, you’ve eliminated any other electrical corrosion risks.

That said, it doesn’t solve all problems, and the main one is material expansion. Since your frame is steel, you’ll need to consider a structural bonding solution (screw-bonding or rivet-bonding).

In any case, I’d recommend leaving some space between your new panel and the existing ones, filled with a sealant to ensure waterproofing and allow for expansion.

So unless you want to go through the painting step, I’d suggest pre-lacquered white steel sheeting (matching your bus color). If I’m not mistaken, Renault uses RAL 9010 for their buses—standard color for the panels…

On another note, a quick word for GX47: no need to stir the pot, but I think your bus has real charm, and at 6500 €, it’s a steal!!! Appearance-wise, sure, it looks old, but no more than an S53 in my opinion 😛! To each their own… Anyway, stay chill as we kick off the new year—take the time to read each other’s posts!🙂

For OdFrance, I think a bus-on-chassis solution is a great balance of handling and price. Skip the lattice frames—they’ll warp. But if you’re serious about off-roading and rough terrain, you’ll need to go for a heavy-duty truck (with a short wheelbase and less overhang). That said, it’s a whole different budget, and converting it into a "motorhome" (with people in the living area while driving) gets way more complicated.

Ciao everyone!
Converting a heavy-duty camper van from a bus/coach/truck
by SJunior · 2007-01-01 · 154 replies
Happy New Year to everyone, best wishes for your health and projects... It's great to see your photos online... A small detail: be careful when taking photos of arc welding—you risk damaging your camera (this is certain for film cameras, I'm not sure about digital but I wouldn't try it)!!!

Otherwise, it's too early in the year for complex calculations... but without knowing the Earth's circumference (which is about 40,000 km), the elevation of your cable would be 1 meter divided by (2 PI), so roughly 159 cm... but what's the point, my dear François57 (especially since I don’t like champagne😛)??

And half of a third of a coach—that should be about 2 meters 😉

See you later! !
Converting a heavy-duty camper van from a bus/coach/truck
by SJunior · 2006-12-24 · 9 replies
I join Patrick in wishing you all a Merry Christmas...
Converting a heavy-duty camper van from a bus/coach/truck
by SJunior · 2006-12-23 · 229 replies
Oops, I didn’t see that you’d posted your guide in the "Comments and Suggestions" section... But there was clearly a need: nearly 400 views and 40 posts since yesterday!!! Well done again!!!

You might also like