Je n'ai malheureusement pas de voyage prévu en ce moment mais je me sers de mon vélo tous les jours pour aller travailler, c'est ma bulle d'air le matin et le soir 🙂
J'ai la poche avant de ma sacoche arrière Vaude qui se décolle, elle n'est pas troué, j'ai lu divers articles sur le forum pour réparer les sacoches quand il y a des trous mais lorsqu'il s'agit de ressouder divers éléments savez-vous si on peut "juste" recoller avec de la colle spéciale PVC vendue en kit de réparation?
Bonjour
Pour toutes réparations en urgence dont celle, cas vécu, concernant un trou ou une déchirure dans une sacoche type Ortlieb, penser à toujours partir avec un rouleau de scotch de chantier dit "orange". Avec ça on répare quasiment tout... Pour les sacoches boucher le trou par l'intérieur. Évidemment il ne s'agit que de réparations provisoires mais ça peut dépanner et parfois tenir longtemps.
Patrick
Désolé Mcmoon, je ne vais pas t'aider. Je suis également à la recherche d'une colle efficace pour ce type de bâche. Pour l'instant je répare avec du fil et une méchante aiguille (pour le cuir). Et oour étanchéifier le tout j'utilise aussi de la colle seam grip mais ça résiste une semaine ou deux maxi... Tandis que les kits de repartions ortlieb me semblent tout juste bon à réparer un petit trou dans un matelas pneumatique. Quelqu'un aurait il testé autre chose de réellement efficace ?
Oui quand il y a un trou c'est une bonne solution.
Par contre comme je le disais dans mon message lorsque les sacoches sont simplement "décollées" c'est peut etre encore plus difficile de réparer car un scotch quel qui soit n'adhèrera pas bien sur des coins et le long des coutures, je vais aller voir un magasin de plongée pour checker leur solution.
Merci Bruno, comme je le disais à Patrick çi-dessous je vais aller voir un magasin de plongée, le matériel des plongeurs est similaire, même matière. Peut-être qu'ils auront un matériel pour ressouder les poches, en fait un trou est plus simple à réparer !
Bonjour, je déterre ce fil car j'ai exactement le même problème avec une sacoche Vaude, la partie inférieure et la partie frontale se sont décollées, et je ne trouve pas d'information sur comment réparer de façon fiable.
Stéphane, Bruno, avez-vous trouvé une solution ?
Je pensais recoller au seam grip, faire une couture par dessus pour renforcer, et étanchéifier cette couture avec une couche de seam grip à nouveau, mais ce que dit Bruno me fait douter...
D'ailleurs Bruno, dans ton cas c'est le seam grip qui n'accroche pas suffisamment sur la sacoche pour l'étanchéité, ou c'est la couture qui ne résiste pas à l'arrachement ?
Je n'ai malheureusement pas de voyage prévu en ce moment mais je me sers de mon vélo tous les jours pour aller travailler, c'est ma bulle d'air le matin et le soir 🙂
J'ai la poche avant de ma sacoche arrière Vaude qui se décolle, elle n'est pas troué, j'ai lu divers articles sur le forum pour réparer les sacoches quand il y a des trous mais lorsqu'il s'agit de ressouder divers éléments savez-vous si on peut "juste" recoller avec de la colle spéciale PVC vendue en kit de réparation?
Un grand merci pour votre aide!
Bonjour,
J'ai aussi des sacoches Vaude, modèle discover, achetées en 2011. Les soudures ont lâchées les une après les autres. En 2019, je les ai confiées à un "zapatero" alors que je traversais le Mexique. Il a cousu à la machine toutes les zones soudées : un travail d’orfèvre ! Depuis, j'ai eu l'occasion de rouler sous de fortes pluies. A priori, elles sont restées étanches.
Jo
Bonsoir
Je propose d'essayer la colle pour PVC de piscine
CC2000 PRO HM Mastic Colle hybride très haute performance multi-usages
On l'a trouvé sur internet ou en magasin piscine
Env 40€ en cartouche 200ml (avec un pistolet manuel idem Bostik ou Sika...)
Ils disent qu'elle colle tout même sous l'eau.
Bonne chance
« On parle toujours de la violence du fleuve qui déborde ses berges - jamais de la violence des berges qui enserrent le fleuve... » disait Berthold Brecht
Bon à savoir Lbj que la couture peut le faire, par contre je ne vois pas trop comment aller coudre jusque là avec ma machine, je pensais faire ça à la main du coup, mais forcément ça n'aura pas la même solidité...
Je ne connaissais pas cette colle Cjtroc, elle a l'air prometteuse en effet, j'hésite quand même avec le Seam Grip qui a aussi une réputation "magique", car j'en ai déjà.
Le coup des espèces de rivets avec le système de fixation est aussi intéressant Vfpromeneur, mais j'ai un peu peur que la taille soit un peu grosse pour les quelques 5mm de recouvrement des deux parties, et que ça fragilise ces morceaux...
Idéalement j'aurais aimé partir sur une solution qui a déjà fait ses preuves sur ces sacoches, pour éviter les surprises sur la route, mais j'ai l'impression que je vais devoir prendre des risques !
Ah, j'ai contacté le support Vaude pour leur demander quelle colle serait efficace, ils m'ont répondu qu'une colle ne fonctionnera pas, et que je dois leur renvoyer la sacoche pour qu'ils regardent si ils peuvent le réparer... Le problème c'est que je n'ai pas le temps d'ici mon départ, et j'ai quand même des doutes sur leur réponse...
Sinon je me suis aussi rendu compte que la partie inférieure est bien "lisse" côté intérieur de la sacoche, contrairement à l'extérieur qui est "tressé", et donc du bon scotch devrait bien adhérer. Je pense que j'ajouterai ça dans tous les cas pour renforcer (genre du Tescon, puisqu'on est dans le thème des produits magiques de réparation).
[...] je ne vois pas trop comment aller coudre jusque là avec ma machine, je pensais faire ça à la main du coup, mais forcément ça n'aura pas la même solidité...
A priori une couture au point de sellier réalisée à la main est bien plus solide qu'une couture machine.
[...] rien n'étant jamais parfait, rien n'est jamais parfaitement désespéré [...]
Sur le site Vaude, il est indiqué que les modèles aqua sont fabriqués dans une toile sans PVC, sans qu'il y ait de précision sur le matériau employé. Par conséquent les colles pour PVC ne sont pas appropriées.
Sans photo du problème, il est difficile de faire une suggestion précise mais sans avoir vu je pense que dans pareil cas je rajouterais un morceau de bâche, collé puis cousu à cheval sur les deux pièces à maintenir.
[...] rien n'étant jamais parfait, rien n'est jamais parfaitement désespéré [...]
Merci Wegg, je note pour le point de couture sellier, je ne connaissais pas...
Effectivement j'aurais dû montrer des photos plus tôt, les deux premières montrent le décollement principal, et j'ai aussi remarqué un second plus petit qu'on peut voir sur la troisième photo, plus délicat à réparer mais sans doute moins sollicité aussi.
Par rapport au PVC et à la colle, le seam grip et le CC2000 PRO HM ne collent pas uniquement le PVC normalement, mais la plupart des matériaux, il y a surtout le silicone qui nécessite une colle spéciale... En plus mes sacoches ont déjà presque 10 ans, je ne sais pas ce qu'il en était à l'époque.
Effectivement rapiécer est sans doute la solution la plus robuste, qui permet de ne pas compter que sur les 6mm existants de recouvrement pour la surface de colle, quantité de fil, et résistance du tissu. Pas le plus élégant ni le plus facile à étanchéifier par contre. Vous savez où on peut trouver un morceau de bâche similaire à celui des sacoches ?
Si je devais effectuer cette réparation je procéderais comme suit :
- Tout d'abord je passerais l'ensemble des zones à réparer avec une brosse et de l'eau savonneuse pour bien enlever les résidus divers ;
- Puis je dégraisserais avec un produit détergent et je rincerais à l'eau claire ;
- Après séchage complet, je collerais les bords l'un sur l'autre avec une colle qui reste souple en séchant ;
- Puis je les coudrais l'un sur l'autre avec un fil solide que j'aurais préalablement enduit de paraffine en intercalant une bande de chambre à air collée à l'intérieur. Cette bande de caoutchouc servant à éviter que les tensions sur le fil viennent cisailler le tissu de la sacoche.
[...] rien n'étant jamais parfait, rien n'est jamais parfaitement désespéré [...]
Merci Wegg, bonne idée la parafine, pour l'étanchéité je suppose ? Tu l'enduirais à froid en frottant le fil contre un bloc solide, ou à chaud en l'imbibant de parafine liquide ?
Pour la bande de caoutchouc je n'y avais pas pensé, mais est-ce que trop limiter la tension du fil ne risque pas de faire travailler le fil seulement en secours de la colle (si elle commence à céder), au lieu de les faire travailler de concert (en répartissant les efforts à la fois sur la colle et le fil) ?
Sur un groupe de cyclovoyageurs d'un certain réseau social, j'ai ausi vu que ces sacoches étaient thermosoudées, et quelqu'un a déjà réparé avec succès le même genre de raccord avec un fer à repasser... Ca me tente un peu en première intention, car ce serait un peu plus rapide, et ne compromettrait pas de passer au collage et couture si ça ne marche pas, alors que je ne peux pas dans l'autre sens...
Tu passes ton fil à froid sur un pain de paraffine, il glissera mieux et ne s'effilochera pas. Quand on coud du cuir on utilise du fil de lin poissé. La bande de caoutchouc, ce n'est pas pour limiter la tension du fil, c'est au contraire pour le tendre au maximum mais que la contrainte soit en partie absorbée par le caoutchouc plutôt qu'entièrement par le tissu de la sacoche qui pourrait se découper à la longue vu qu'il n'est pas tout jeune.
Les sacoches sont effectivement thermosoudées. Au boulot, il m'arrive d'utiliser une pince chauffante spéciale pour thermosouder du polyéthylène ; le plastique à souder est alors coincé entre deux mâchoires chauffantes. Avec un fer cela ne va pas être aisé car la surface de contact est trop grande et il va être quasiment impossible d'appliquer une pression suffisante et parfaitement localisée. Il va également falloir trouver la bonne température. Avec un fer à repasser, il est facile de travailler sur des surfaces planes comme lorsqu'on modifie la taille d'un matelas gonflable mais sur des sacoches cela me semble coton.
[...] rien n'étant jamais parfait, rien n'est jamais parfaitement désespéré [...]
Merci pour vos conseils !
Ah, j'ai contacté le support Vaude pour leur demander quelle colle serait efficace, ils m'ont répondu qu'une colle ne fonctionnera pas, et que je dois leur renvoyer la sacoche pour qu'ils regardent si ils peuvent le réparer... Le problème c'est que je n'ai pas le temps d'ici mon départ, et j'ai quand même des doutes sur leur réponse...
Cyril
Dommage que vous n'ayez pas le temps car le service client de Vaude est exceptionnel. J'ai eu à faire appel à eux à 2 reprises et ils ont été très rapide et je n'ai rien payé. La 1ère fois, un défaut de fixation de la sacoche de guidon neuve, ils m'en ont renvoyé une sans poser de questions autres que l'envoi de photos (comme je l'avais réparée moi-même, j'en ai 2). Et la seconde fois, pour le porte-carte de l'aquabox déjà ancienne qui était devenue jaunie et commençait à gêner la lecture, ils m'en ont envoyé une gratos car c'était l'ancien modèle que je ne trouvais nulle part à acheter. Encore is, pas de question. La pochette dasn ma boîte à lettre 3 jours après depuis l'Allemagne.
Y'a pas à dire, ils sont pragmatiques et font ce qu'ils faut pour maintenir la satisfaction du client.
Je pense que la réparation aurait été faite parfaitement et à un coût très raisonnable.
Ok merci Wegg, je comprends mieux, mais du coup il faudrait mettre une bande de caoutchouc des deux côtés de la sacoche idéalement, pour protéger les deux côtés... et pas forcément besoin d'un matériau aussi mou (mais j'avoue que je n'ai pas forcément de meilleure idée, il faut en effet que ça reste souple aussi).
Pour la thermosoudure je me disais pouvoir appuyer avec le bord du fer ? (par exemple le fer à farter qui a les côtés bien rectilignes). L'avantage c'est que je peux chauffer du côté tissu, qui craint moins la chaleur, et je me demande si je ne pourrais pas préchauffer un peu l'autre partie au décapeur thermique en protégeant les parties non ciblées...
Tve64 est-ce que ton matériel était encore sous garantie quand ces échanges ont eu lieu ? Parce que mes sacoches ont largement plus de 5 ans...
Tve64 est-ce que ton matériel était encore sous garantie quand ces échanges ont eu lieu ? Parce que mes sacoches ont largement plus de 5 ans...
Oui pour la sacoche de guidon, non pour le porte-carte (c'était d'ailleurs la source du problème, car il était tellement vieux qu'il n'était plus disponible chez des détaillants).
Vaude a fait preuve d'énormément de pragmatisme. Ils devaient leur en rester dans un carton, ils me l'ont envoyé. Il ne se sont pas emm...és avec des commandes, des paiements etc. Dans une enveloppe et zoup, la poste! Je l'avais 3 jours après.
Quand je vois comment mon fils galère pour récupérer un cache plastique de moyeux Mavic à 2 centimes qui doit peser 2 grammes (on lui demande de racheter quasiment le moyeu) alors que je suis sûr qu'ils ne gèrent pas ce capuchon en stock et qu'il leur suffirait de le mettre dans une enveloppe à bulle pour qq € et de se faire un client "engagé" à vie alors que là, il se dit "put... Mavic, je vais éviter à l'avenir..."
Hi there, I’m planning a cross-Canada bike trip, and I’ve got a question that might seem silly, but could someone tell me how to pack a bike (in a box, with a fragile sticker... I don’t know) for a flight? Thanks in advance!
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam.
My question is about getting back to Nantes.
Do any of you know what the best return option might be? I’d love to hear about your experiences.
I saw that FlixBus doesn’t take bikes.
By train, I think it’s possible but would involve multiple local trains.
We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance!
Have a great evening
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires.
I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time).
I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral.
I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough?
And one last question: white gas stove or can I get by with my gas stove?
I’ve gotten used to crossing Europe by bus to return by bike.
It was really convenient to take the bike without having to disassemble it.
But FlixBus no longer accepts bikes...
What alternatives do you know about?
Thanks.
Hi there,
I’m planning to ride the Dutch section of the EuroVelo 19, from Maastricht to Rotterdam.
Since it’s too complicated to bring my bike on the train, I’m looking to rent one locally.
I’d love any tips or bike rental shop recommendations—I’m struggling to find options even in Rotterdam.
The plan is to rent in Rotterdam, take the train to Maastricht with the bike, then cycle back to Rotterdam.
Thanks in advance for any advice or suggestions!
Nath
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August!
Virginie
Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
I’m planning to build a new touring bike.
I want to prioritize lightness.
That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads.
The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper.
I’m particularly considering the RockShox Rudy Ultimate XPLR fork.
Unlike MTB forks, its travel is short: either 30 mm or 40 mm.
It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring.
And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear.
More generally, how reliable are these kinds of forks?
Hi everyone,
I wanted to share with you the incredible feat my friend José, who’s 72 years old, is currently undertaking. He left Auterive near Toulouse on Monday, May 18, 2026, on his non-electric bike, heading for the North Cape in Norway!
You can follow his route on the link below—he’s currently in Sweden:
https://thierry-thomas.travelmap.net/jose-de-toulouse-a-nord-cap-2026
You can zoom in on the map and click on each stopover town to see the photos
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.
It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.
One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.
We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.
Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
Hi there, we’re a group of 4 cyclists looking to get from Treviso in Italy to Munich with our 4 non-folding bikes. It seems complicated! Are there any solutions? Thanks so much.
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed
story being posted online soon
1100 km in 11 days
beautiful and varied regions
Hi there, we’re planning a Munich to Venice bike trip at the end of June 2026. Getting back from Venice to Toulouse by train with 4 bikes isn’t straightforward. What return options have others who’ve done this trip chosen? Any tips or great deals would be much appreciated. Thanks a bunch! !
Hi everyone,
Happy owner of a Pegasus Estremo bike with a Rohloff hub, which is giving me trouble with the SF11-NCX-FT-E-LITE 700C TS 300/0 fork (serial number TD01329060). It’s starting to show its age, and I’d like to repair it to extend the life of my beloved bike.
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Hi, I'd like to know if anyone has done this route recently or has reliable info.
Does the track exist, and most importantly, is there sand (for biking)?
Any info is welcome.
Cheers,
diego ambilobe: mangaoka, manondro, ramena
vohemar sambava: masondrono, tanambao
Hi there,
New to bike touring,
I’d love to start with a section of the Via Rhona to explore and share (route to be decided).
Looking forward to exchanging tips!
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
A big thank you to Lazarou for all the info you share in this forum!
I'm passionate about Morocco, which I cycled through back in 2009.
Last year, my wife and I explored the High Atlas by tandem. Completely smitten, we're heading back in April (Anti Atlas) and May (High and Middle Atlas), still on our tandem.
Do you have any info on the track between Amezri and Ali Ait Nito? Are the river crossings in the Tessaout still there? It's not easy to navigate with a loaded tandem... especially if the river level is high due to this year's heavy snowmelt!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
Claudio specializes in the route of the Savoie lakes
Here are his travels
Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné
Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way
Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place
Rural and quite peaceful
A road cycling route created by Serge B...
First of all... happy New Year! Wishing you great roads in 2017!
I’ve been traveling for a few years now with a high-quality mountain bike, but it’s equipped with hydraulic disc brakes. I live (pedal) with the constant worry of a breakdown (leak, air bubble, heat causing the fluid to...). My bike mechanic tells me it’s impossible to switch them out for V-brakes.
What do you all think? Am I taking a big risk continuing (alone) with these brakes? Thanks in advance for your great tips!
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025.
It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border.
We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
Hi there,
I’m planning the route to cycle from Lille to Nordkapp with my partner.
Duration: 3 months, from May 1st to July 31st, 2026.
In the attached details below, I need to add some "non-riding" days (rest days, basically).
So I’m looking to "shorten" the trip by taking ferries or trains for some stretches. Which areas could I skip?
Thanks in advance for your great tips.
Have a good evening.
https://www.komoot.com/fr-fr/collection/4023980/-lille-cap-nord-1er-mai-au-31-juillet-2026?ref=collection
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure!
Thanks in advance.
Hi, has anyone recently bought Primus or Butagaz gas, possibly puncture-style, in Dubrovnik or the surrounding area? Same question for Albania... thanks. aichatou
Just a few words about the loop I did by bike in Yunnan.
Entry and exit
I entered China through the Sino-Vietnamese border crossing at Lào Cai / Hekou under the 30-day visa exemption currently available to French nationals and others.
The process was simple and quick. A Chinese police officer even helped me complete my electronic pre-registration at a computer kiosk. I wasn’t aware this formality was required—it’s similar to Thailand’s TM6.
No issues with the bike.
I left the country via the Sino-Laotian border crossing at Mohan / Boten.
The atmosphere was a bit chaotic there, but again, no problems with the bike.
The timing
I visited Yunnan in February 2026.
Weather-wise, at higher altitudes (between 1,500 and 2,000 meters), it was around ten degrees at night and in the mornings, and around twenty degrees at the hottest part of the day.
I had two days of rain, so I took the bus to keep moving. Otherwise, clear blue skies.
Culturally, Chinese New Year fell on February 17th (and the 15 days following), right in the middle of my trip. Because of this, my take on the traffic might be off.
Accommodation and food
I always found a hotel to stay in for prices ranging from 8 to 15 €. Except in Kunming (the capital), where many hotels were fully booked (Chinese New Year). I ended up at a 100 € hotel with great value for money.
A bowl of noodles costs about 1.5 € on average.
Onboard electronics
Since my smartphone doesn’t support eSIMs, I subscribed to a China plan with my carrier. Otherwise, for much cheaper, Alipay offers eSIMs for foreigners that allow access to services usually blocked for Chinese users (WhatsApp, Facebook, etc.).
An internet connection is essential for paying with Alipay or WeChat, as this payment method is widespread.
I only managed to use Alipay.
Either way, always carry cash because sometimes there’s no signal, or the merchant only accepts WeChat.
Also, it’s best to bring a power adapter when you arrive rather than struggling to find one.
Traffic and roads
The Chinese aren’t reckless drivers. They follow traffic rules and watch out for cyclists. This is slightly less true in Xishuangbanna (the region bordering Myanmar and Laos).
In urban areas, there are almost always wide bike lanes, separated from other roads, where bikes, electric mini-scooters, and scooters share the space pretty harmoniously.
The roads are in great condition, and traffic is generally manageable—even light—except for one stretch (Eshan -> Yangwu).
Most traffic is absorbed by expressways, China’s equivalent of highways: toll roads that are off-limits to slow vehicles.
You’re never far from these expressways; sometimes you even ride alongside them, which can be noisy at times.
The climbs are usually reasonable, around 5% to 6%. From what I remember, the steepest section was between Menglun and Mengla, with gradients of 8% to 10%, sometimes more.
Riding at these altitudes—though modest—took a bit of getting used to.
The route
I didn’t plan anything in advance. My only goal was to reach Kunming. I don’t know why, but just hearing the name of that city, like Yunnan, always felt dreamy to me.
Hi! I’m planning to visit the Stockholm Archipelago by bike in early April.
Do you know if the boats will be running between the different islands at that time of year? For those who’ve already been, all your tips and recommendations are welcome—accommodation, etc. Also, do you know where I can rent a bike in Stockholm? Thanks so much in advance for your help!
Hello there, pedal-powered Young Boys!
Claudio (still from Faverges)
dreaming about a cycling getaway in Italy from Faverges (train all the way to Turin)
from Turin down to Venice along the Po River and back via the Padana (Alta Italia da attraversare – Northern Italy to cross)
The tricky part is getting from Chioggia to Venice.
I read it’s possible by hopping on a boat from island to island,
but it sounds a bit stressful.
Has anyone already tackled this route?