Entretien du vélo et voyage longue durée?
by Bayernd77
This discussion is in French, the community’s main language.
Original post
Cette question s'adresse plutôt à ceux qui sont partis sur une longue durée (au moins 1 an), en Asie, Afrique ou et Amérique du Sud.
Comment avez-vous fait pour l'entretien de votre vélo, sachant que ce sont souvent des routes non goudronnées ? (nettoyage de la chaine, remplacement de la k7)
Est-il judicieux de partir avec 2 ou 3 chaînes et de les changer tous les 1000km pour augmenter la durée de vie de la K7 et des chaînes ?
Bonjour David,
Je profite de cette excellente question pour m'incruster dans ce post car les réponses m'intéressent au plus haut point.
Je vois que ta préparation se poursuit activement.
A bientôt
JLuc
Cordialement, le meilleur est à venir
à voir et à entendre 🤪 janodou.com « Rencontrer l'autre c'est se découvrir soi même (JLM) »
La petite expérience que j'ai est qu'une chaine peut tenir largement plus que 1000 km. Dernièrement, j'ai fait Lima - Santiago avec une traversée du salar d'Uyuni traumatisante pour le vélo (il avait neigé durant la nuit précédente et cela avait mis une pellicule d'eau de 5 cm dans certains secteurs) et j'ai pu tout de même finir sans problème à Santiago. Cette expérience montre que la chaine peut tenir au moins 4500 km. Le sable et le sel sont redoutables mais il faut une petite brosse et une petite fiole d'huile fine.
André Etchelecou
http://ddvagabondages.fr
En fait j'arrive à emmener ma chaîne jusqu'à 10000km. Ce que je pensais, c'est de prendre 2 autres chaînes et de les changer alternativement tous les 1000km pour amener la K7 jusqu'à 30000km. Qu'en penses-tu ?
La mienne je la nettoie régulièrement, mais en voyage, il pleut, il y a de la boue et un bon dégraissant est souvent nécessaire. Et cela ne se trouve pas à chaque coin de rue sur les autres continents.
Salut Jean Luc 🙂 La préparation avance à grands pas ?
Bonjour,
Nous avons voyagé 2 ans autour du monde. Nous n'avons emporté que le strict nécessaire pour les réparations (câbles, rayons, patins...). Au bout de 10 000 km nous avons remplacé à Bangkok les chaînes, câbles, cassettes et les 2 petits plateaux. Nous avons remplacé en Nouvelle-Zélande les pneus et à nouveau les chaînes. Au total pour 20 000 km nous n'avons subi aucune casse, ce qui laisse l'esprit bien libre pour profiter du voyage. Je pense que le choix des composants et accessoires avant le départ est primordial bien que parfois coûteux mais au final on est gagnant. Ne pas négliger l'entretien quotidien des machines, nettoyage, graissage et serrage de la visserie qui a tendance à vouloir s'échapper, notamment sur les pistes. Seuls incidents notables en 2 ans: une pédale (non automatique) à changer en Inde pour cause de divorce entre l'axe et la cage et une sacoche de guidon à remplacer (banir les fermetures à glissière). Dans l'outillage ne pas oublier la clé pour démonter les pédales. Nous repartons en Asie Centrale mais en comptant en mois cette fois-ci!
Nous avons voyagé 2 ans autour du monde. Nous n'avons emporté que le strict nécessaire pour les réparations (câbles, rayons, patins...). Au bout de 10 000 km nous avons remplacé à Bangkok les chaînes, câbles, cassettes et les 2 petits plateaux. Nous avons remplacé en Nouvelle-Zélande les pneus et à nouveau les chaînes. Au total pour 20 000 km nous n'avons subi aucune casse, ce qui laisse l'esprit bien libre pour profiter du voyage. Je pense que le choix des composants et accessoires avant le départ est primordial bien que parfois coûteux mais au final on est gagnant. Ne pas négliger l'entretien quotidien des machines, nettoyage, graissage et serrage de la visserie qui a tendance à vouloir s'échapper, notamment sur les pistes. Seuls incidents notables en 2 ans: une pédale (non automatique) à changer en Inde pour cause de divorce entre l'axe et la cage et une sacoche de guidon à remplacer (banir les fermetures à glissière). Dans l'outillage ne pas oublier la clé pour démonter les pédales. Nous repartons en Asie Centrale mais en comptant en mois cette fois-ci!
Annie et Alain.
Nous sommes des voyageurs à vélo et non des cyclistes en voyage...
http://pommequiroule.homeip.net
Ne pas emporter de chaine supplémentaire ni faire de l'alternance tous les 1000 km. Mais avoir deux attaches-chaine, un dérive-chaine. Quand je change de chaine, je change en même temps les pignons et, s'ils sont fatigués, les plateaux. C'est préférable de dépenser un peu d'argent au départ plutôt que de devoir se dépanner en cours de périple. Etre sûr de son matériel pour avoir l'esprit libre ... Important, je crois !
André Etchelecou
http://ddvagabondages.fr
Je suis équipé en LX et j'entretiens régulièrement la chaîne. L'année dernière, j'ai fait 20000km en France, j'ai changé la chaîne à 10000 et en rentrant, les pneux (marathon XT plus) était encore bons. C'est tout ce que j'ai eu à changer, à part bien sûr les patins.
J'ai lancé ce post car j'ai rencontré des cyclos qui avaient voyagé pendant 2 ans. Ils avaient pris avec eux 2 chaînes supplémentaires et tous les 1000 km, ils la changeaient. Sur les 2 ans, ils n'ont pas eu de problèmes, les 3 chaînes ont tenu le coup ainsi que la K7. Je voulais savoir ce qu'en pensent les autres grands voyageurs.
en fait lorsque l'on avance un chiffre de durée de vie d'une chaine, on parle plutôt de 5000 km.
à l'heure actuelle, compte tenu des croisements de chaine avec les plateaux et blocs de vitesses modernes, il vaut mieux investir dans un comparateur de chaine qui donnera très exactement l'état d'usure de la chaine et éventuellement des pignons.
ne pas négliger de nettoyer régulièrement la chaine, le dérailleur et les pignons surtout en cas de passage dans des parties difficiles
le nettoyage se fait avec un bon coup de chiffon.
il va sans dire que la chaine est neuve au départ ainsi que patins, câbles, gaines et pneus.
bon voyage
ab35
Salut,
Au printemps dernier j'ai fait un AR France archipel D'Aland, et j'ai eu pas mal de routes en terre, voire en gravier au Danemark, et pas mal de 'sable' sur les pistes cyclables et bords de routes. N'ayant pas pu nettoyer ma chaine (Shim 8V) comme je le voulais, elle était complètement rincée à 5000km, et je l'ai changée sur le retour (bon, en Europe pas de souci). Tout ça pour dire que lorsque je repartirai pour une longue distance, je m'équiperai d'un nécessaire de nettoyage, je ne sais pas encore quel système (brosse à dent + liquide de nettoyage biodégradable ?).
Au printemps dernier j'ai fait un AR France archipel D'Aland, et j'ai eu pas mal de routes en terre, voire en gravier au Danemark, et pas mal de 'sable' sur les pistes cyclables et bords de routes. N'ayant pas pu nettoyer ma chaine (Shim 8V) comme je le voulais, elle était complètement rincée à 5000km, et je l'ai changée sur le retour (bon, en Europe pas de souci). Tout ça pour dire que lorsque je repartirai pour une longue distance, je m'équiperai d'un nécessaire de nettoyage, je ne sais pas encore quel système (brosse à dent + liquide de nettoyage biodégradable ?).
Pascal
Je pars l'an prochain pour plusieurs années. Avant le départ, tout sera neuf et révisé mais ensuite, selon les parties du monde où l'on se trouve, ce n'est pas si évident que cela.
Bonjour,
Quand je voyage avec mon vélo. J'ai un petits sac avec une veille brosse à dents souple, un pinceau et petite brosse et 2 chiffons, et une bouteille de 20 cl de gasoil, de la poudre de lessive.
J'ai rien de trouver mieux que la veille brosse à chicots pour nettoyer la chaine et la k7
Le chiffon pour essayer la chaine et l'autre pour les roues et le cadre
la lessive c'est pour netoyer les mains
effectivement je change 2 fois ma chainne par an en gros une chainne pour l'hiver, le printemps pas plus de 45000 kilomètres et une autre pour l'été jusqu'à 6000 et la k7 je la pousse jusqu'à 20 000 kilomètres ansi que les plateaux K7+plateaux = changer tous les 2 ans
Je précise que je roule avec k7 de 9 vitesses
Si je devais faire un grand voyage en vélo, je partirais avec des patins de freins en secours un gros paquets et des cables friein et vitesse coupées à la bonne dimention+dérive chaine et quelque attaches chainnes et je prévoirais des étapes pour recevoir les différentes pièces. Envoie par la poste Voilà A+
Si je devais faire un grand voyage en vélo, je partirais avec des patins de freins en secours un gros paquets et des cables friein et vitesse coupées à la bonne dimention+dérive chaine et quelque attaches chainnes et je prévoirais des étapes pour recevoir les différentes pièces. Envoie par la poste Voilà A+
Chapeau bas, et toutes mes félicitations pour tes parcours hiver printemps. 45.000 Kms .
je fus navigateur navigaterre , je reste navigaterre.
Qu'importe d'où nous venons, car nous pouvons aller beaucoup plus loin que ce dont nous avions révé .
d'accord avec toi.
l'ordre de grandeur 2 à 3 chaines pour un bloc de cassettes.
éviter les montages 10 vitesses (cela ne sert à rien pour un cyclo campeur et surtout c'est plus fragile, plus cher et pas sur de trouver sur place).
pour un grand voyage, le comparateur de chaine, un investissement rentable, pas lourd et pas gros.
pour les plateaux, on peut pousser jusqu'à 20 à 30 000 km.
le coup de chiffon, c'est le B à Ba
ab35
Merci pour ta réponse qui m'aide à y voir un peu plus clair 🙂
Oui c'est vrai le coup du gasoil pour dégraisser la chaîne, je n'y avais pas pensé. Et la brosse à dents replacera ma grosse brosse.
J'ai toujours 3-4 paires de patins dans les sacoches car il suffit de passer 1 semaine, 10 jours dans la montagne pour qu'ils s'usent et soient bons à être remplacés.
Les câbles, dérive chaîne et attaches sont dans les sacoches également.
je pensais pourquoi pas rajouté une petite bassine pliable genre ortelieb de o,5 l
Elle servirait de récipient pour netoyer le vélo en utilisant peu d'eau
A+ bon parcourt
bonjour
J'ai un VTT du commerce. avec un ensemble shimano deore 27 vitesses et des freins V brake a patins. pour la chaine je la change tous les 8.000 km environ, dont 1/3 de piste, la cassette fait 20.000 km, et les plateaux 30.000km. les moyeux de roue, jantes, roulement de direction , k7 de pedalier, petites roues de derailleur, cables, font 20.000 km
En realité si je fais reparer en europe, j'ai interet à changer de VTT tous les 20.000 km, soit tous les 2-3 ans, ça doit me revenir le meme cout. quoique maintenant pour trouver un VTT qualité shimano deore sans frein a disque, faut chercher longtemps, hélas.
une fois par semaine, 2 sur piste, je nettoie la chaine avec un petit pinceau et 1/2 litre de diesel dans une bouteille d'eau minerale ramassée le long de la route, ça y pousse en quantité. je nettoie la k7 plateaux et derailleurs en meme temps. pas besoin d'huile il y en a dans le diesel. en cas de necessité je demande a un garage ou bicicleterie un peu d'huile.
pour l'idee d'alterner des chaines, en principe on ne peut pas couper une chaine shimano. en realité c'est possible mais pas prudent, et on peut acheter le petit goujon special qui relie les maillons par internet. http://www.routens.com/product-vttam-127-5649-ttc-shimano-1-axe-remplacement-chaine-9-v.html
comme materiel en plus j'ai le fusible entre le cadre et le derailleur, 2 patins de frein, 3 maillons de chaine, le goujon susdit, et des vis alene et ecrous et rondelles, 1 a 2 chambres à air, et rustines et colle, des liens en acier a vis et en plastique. Parfois j'ai 2 rayons, mais pas le dernier voyage. On peut rouler 200 km avec 2 rayons en moins.
et comme outil j'ai une cle de 15 pour les pedales, la cle pour retirer la k7, 3 demonte pneu, et un multi outil qui fait aussi coupe chaine et tendeur de rayon http://www.routens.com/product-vttam-308-3720-ttc-lezyne-outil-lezyne-stainless-20.html
je revise le velo avant de partir, partie moi meme et partie dans une grande bicicleterie. ensuite j'evite toute reparation faite par un petit artisan, ou dans une petite ville, 9 fois sur 10 ils sont totalement incompetents pour nos velos et cassent tout. je prefere reparer moi meme ou attendre la grande ville. on peut faire 500 a 1000 km avec un velo endomage.
a + Pierre
J'ai un VTT du commerce. avec un ensemble shimano deore 27 vitesses et des freins V brake a patins. pour la chaine je la change tous les 8.000 km environ, dont 1/3 de piste, la cassette fait 20.000 km, et les plateaux 30.000km. les moyeux de roue, jantes, roulement de direction , k7 de pedalier, petites roues de derailleur, cables, font 20.000 km
En realité si je fais reparer en europe, j'ai interet à changer de VTT tous les 20.000 km, soit tous les 2-3 ans, ça doit me revenir le meme cout. quoique maintenant pour trouver un VTT qualité shimano deore sans frein a disque, faut chercher longtemps, hélas.
une fois par semaine, 2 sur piste, je nettoie la chaine avec un petit pinceau et 1/2 litre de diesel dans une bouteille d'eau minerale ramassée le long de la route, ça y pousse en quantité. je nettoie la k7 plateaux et derailleurs en meme temps. pas besoin d'huile il y en a dans le diesel. en cas de necessité je demande a un garage ou bicicleterie un peu d'huile.
pour l'idee d'alterner des chaines, en principe on ne peut pas couper une chaine shimano. en realité c'est possible mais pas prudent, et on peut acheter le petit goujon special qui relie les maillons par internet. http://www.routens.com/product-vttam-127-5649-ttc-shimano-1-axe-remplacement-chaine-9-v.html
comme materiel en plus j'ai le fusible entre le cadre et le derailleur, 2 patins de frein, 3 maillons de chaine, le goujon susdit, et des vis alene et ecrous et rondelles, 1 a 2 chambres à air, et rustines et colle, des liens en acier a vis et en plastique. Parfois j'ai 2 rayons, mais pas le dernier voyage. On peut rouler 200 km avec 2 rayons en moins.
et comme outil j'ai une cle de 15 pour les pedales, la cle pour retirer la k7, 3 demonte pneu, et un multi outil qui fait aussi coupe chaine et tendeur de rayon http://www.routens.com/product-vttam-308-3720-ttc-lezyne-outil-lezyne-stainless-20.html
je revise le velo avant de partir, partie moi meme et partie dans une grande bicicleterie. ensuite j'evite toute reparation faite par un petit artisan, ou dans une petite ville, 9 fois sur 10 ils sont totalement incompetents pour nos velos et cassent tout. je prefere reparer moi meme ou attendre la grande ville. on peut faire 500 a 1000 km avec un velo endomage.
a + Pierre
tout le monde prétend que la Terre est ronde, mais ne le croyez pas, en fait elle est plate bien sûr!
http://mandolpierre.overblog.com
Merci pour le petit artisan et la petite ville !!!!!!
J'habite en campagne et j'aime les petits artisans compétents
Randonne peut-être en France, tu en trouveras surement des plus compétents qu'en ville
J'habite en campagne et j'aime les petits artisans compétents
Randonne peut-être en France, tu en trouveras surement des plus compétents qu'en ville
Des kilomètres pour voir plus loin !
bonjour
quand je parle des artisans incompetents, je parle de ceux que j'ai rencontré en turquie, au maroc et en amerique du sud. Ils n'ont pas l'occasion de reparer des velos aussi sophistiqués que les notres, et donc ils ne savent pas.
en france, je n'ai pas eu l'occasion d'essayer des artisans dans la campagne. mais ceux sont les artisans vendeurs de velo des villes grandes et petites qui m'ont convaincu d'apprendre et de reparer mon velo tout seul, vu leur mauvaise grace, leur lenteur et leurs mauvaises reparations. En Europe, je n'ai pas beaucoup d'experience, mais en belgique et au portugal j'ai trouvé des reparateurs capables de changer un rayon ou autre petite reparation dans l'urgence.
a + Pierre
en france, je n'ai pas eu l'occasion d'essayer des artisans dans la campagne. mais ceux sont les artisans vendeurs de velo des villes grandes et petites qui m'ont convaincu d'apprendre et de reparer mon velo tout seul, vu leur mauvaise grace, leur lenteur et leurs mauvaises reparations. En Europe, je n'ai pas beaucoup d'experience, mais en belgique et au portugal j'ai trouvé des reparateurs capables de changer un rayon ou autre petite reparation dans l'urgence.
a + Pierre
tout le monde prétend que la Terre est ronde, mais ne le croyez pas, en fait elle est plate bien sûr!
http://mandolpierre.overblog.com
Salut David,
Bon courage pour ton prochain périple. Je pense que tu as déjà reçu pas mal de bons conseils sur ce site. Les outils étant lourds, je prends le minimum en banissant les multi-outils très chers et qui se révèlent souvent inefficaces sur le terrain : mauvaise prise en main, petitesse et difficulté de serrage 🏴☠️. Pars d'un principe professionnel en matière de réparation : un outil, une fonction 😛. Avant de partir je désosse entièrement le vélo et révision générale (ainsi tu apprends à mieux connaître les organes de ta machine). Une fois parti tu sauras quoi emporter en fonction de ton expérience. Au niveau de la chaine un dérive-chaine suffit, expérience vécu : 15 à 30 mn. suffisent pour repartir. Bien sûr ta chaine est plus courte et tu ne passeras certainement pas sur le grand plateau mais tu peux rouler longtemps ainsi, voire même finir ton circuit. Dès que tu le peux tu mets une chaine neuve. Pour les rayons qui cassent une clé et un hypercracker ou assimilé pour changer ceux côté cassette. Gaine et câble de rechange, patins de frein. Pour la visserie beaucoup répètent et à juste titre qu'il faut les resserrer régulièrement. A l'instar des vis qui maintiennent les mâchoires de frein, je mets à peu près partout du frein filet bleu (de marque Loctite ou autre), pour les filles vous pouvez utiliser du vernis à ongles 😏, ça marche aussi. Depuis je n'y pense plus (aux vis, pas aux filles) et peut me consacrer à autre chose. Etonnant d'ailleurs que ce process ne soit pas inscrit sur les rolls des cyclo. à plus de 1000 euros l'unité !!! 😮. Intérêt ? le couple de serrage en mécanique vélo étant beaucoup plus faible qu'en mécanique automobile, le frein filet évite le serrage excessif, voire la détérioration irréversible du cadre !!! et là il ne reste plus que la soudure .... 🏴☠️🏴☠️😕😕 ou acheter un vélo neuf 🙁 A+
Bon courage pour ton prochain périple. Je pense que tu as déjà reçu pas mal de bons conseils sur ce site. Les outils étant lourds, je prends le minimum en banissant les multi-outils très chers et qui se révèlent souvent inefficaces sur le terrain : mauvaise prise en main, petitesse et difficulté de serrage 🏴☠️. Pars d'un principe professionnel en matière de réparation : un outil, une fonction 😛. Avant de partir je désosse entièrement le vélo et révision générale (ainsi tu apprends à mieux connaître les organes de ta machine). Une fois parti tu sauras quoi emporter en fonction de ton expérience. Au niveau de la chaine un dérive-chaine suffit, expérience vécu : 15 à 30 mn. suffisent pour repartir. Bien sûr ta chaine est plus courte et tu ne passeras certainement pas sur le grand plateau mais tu peux rouler longtemps ainsi, voire même finir ton circuit. Dès que tu le peux tu mets une chaine neuve. Pour les rayons qui cassent une clé et un hypercracker ou assimilé pour changer ceux côté cassette. Gaine et câble de rechange, patins de frein. Pour la visserie beaucoup répètent et à juste titre qu'il faut les resserrer régulièrement. A l'instar des vis qui maintiennent les mâchoires de frein, je mets à peu près partout du frein filet bleu (de marque Loctite ou autre), pour les filles vous pouvez utiliser du vernis à ongles 😏, ça marche aussi. Depuis je n'y pense plus (aux vis, pas aux filles) et peut me consacrer à autre chose. Etonnant d'ailleurs que ce process ne soit pas inscrit sur les rolls des cyclo. à plus de 1000 euros l'unité !!! 😮. Intérêt ? le couple de serrage en mécanique vélo étant beaucoup plus faible qu'en mécanique automobile, le frein filet évite le serrage excessif, voire la détérioration irréversible du cadre !!! et là il ne reste plus que la soudure .... 🏴☠️🏴☠️😕😕 ou acheter un vélo neuf 🙁 A+
Bien vu pour le frein filet. Avant ma traversée de l'Afrique, j'avais serré toute ma visserie au loctite et jamais (même les garde-boue) je n'ai revissé une vis malgré les pistes et la tôle ondulée.
Malgré leur faible qualité, j'avais des outils multiples (poids oblige) et je ne le regrette pas pour le peu d'usage que l'on en a.
Des kilomètres pour voir plus loin !
pour nettoyer la transmission, je pense à acheter du dégrippant. Il paraît que ça dégraisse très bien.
Bonjour,
Personne ne graisse les roulements de pédales et d'axes des roues? Je ne suis pas comme vous un grand rouleur mais tous les ans je démonte mes roulements et remplace la graisse.
A+
Log in first, then come back to this page.
You might also like
Densha Otaku - Lesser-Known Regions
Two weeks under the Puglia sun
Return to Swedish Lapland: Trekking the Kungsleden and Crossing Sarek
Off on a winter adventure in the American West!
3 weeks in Laos, at a relaxed pace
Draw Me Your Japan...
South Africa in safari mode: February/March 2026
Back in Tunisia (live account)
More discussions
Bonjour,
Je prévois de faire la partie hollandaise de l'Eurovélo 19, de Maastricht à Rotterdam.
Comme c'est trop compliqué d'amener mon vélo en train, je cherche à louer un vélo sur place.
Je suis preneuse de conseils ou d'adresses de loueurs de vélos, j'ai du mal à en trouver même à Rotterdam.
L'idée serait de le louer à Rotterdam, de partir avec en train jusqu'à Maastricht, pour faire Maastricht/Rotterdam à vélo
Merci d'avance pour vos conseils ou suggestions.
Nath
I’ve gotten used to crossing Europe by bus to return by bike.
It was really convenient to take the bike without having to disassemble it.
But FlixBus no longer accepts bikes...
What alternatives do you know about?
Thanks.
Hi there,
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August! Virginie
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August! Virginie
Coming soon:
https://www.Biclou.com/parcours/durance/
Starting from Faverges: 900 km over 9 days

Here’s the detailed Durance route starting from Briançon

Here’s the detailed Durance route starting from Briançon

Hi there,
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires. I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time). I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral. I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough? And one last question: white gas stove or can I get by with my gas stove?
Nath
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires. I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time). I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral. I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough? And one last question: white gas stove or can I get by with my gas stove?
Nath
Hi everyone,
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam. My question is about getting back to Nantes. Do any of you know what the best return option might be? I’d love to hear about your experiences. I saw that FlixBus doesn’t take bikes. By train, I think it’s possible but would involve multiple local trains. We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance! Have a great evening
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam. My question is about getting back to Nantes. Do any of you know what the best return option might be? I’d love to hear about your experiences. I saw that FlixBus doesn’t take bikes. By train, I think it’s possible but would involve multiple local trains. We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance! Have a great evening
Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
Hi there,
I’m planning to build a new touring bike. I want to prioritize lightness. That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads. The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper. I’m particularly considering the RockShox Rudy Ultimate XPLR fork. Unlike MTB forks, its travel is short: either 30 mm or 40 mm. It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring. And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear. More generally, how reliable are these kinds of forks?
Thanks in advance
I’m planning to build a new touring bike. I want to prioritize lightness. That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads. The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper. I’m particularly considering the RockShox Rudy Ultimate XPLR fork. Unlike MTB forks, its travel is short: either 30 mm or 40 mm. It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring. And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear. More generally, how reliable are these kinds of forks?
Thanks in advance
Hi everyone,
I wanted to share with you the incredible feat my friend José, who’s 72 years old, is currently undertaking. He left Auterive near Toulouse on Monday, May 18, 2026, on his non-electric bike, heading for the North Cape in Norway!
You can follow his route on the link below—he’s currently in Sweden:
https://thierry-thomas.travelmap.net/jose-de-toulouse-a-nord-cap-2026
You can zoom in on the map and click on each stopover town to see the photos
Hi there!
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.

It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.




One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.


We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.



Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
S.
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.

It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.




One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.


We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.



Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
S.
Hi there, we’re a group of 4 cyclists looking to get from Treviso in Italy to Munich with our 4 non-folding bikes. It seems complicated! Are there any solutions? Thanks so much.
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed story being posted online soon 1100 km in 11 days beautiful and varied regions
claudio

the trip was completed story being posted online soon 1100 km in 11 days beautiful and varied regions
claudio

Hi, I'm looking for a Pino tandem bike for sale in Quebec and I can't find any. Does anyone have any info, please? Thanks a bunch!
Hi there, we’re planning a Munich to Venice bike trip at the end of June 2026. Getting back from Venice to Toulouse by train with 4 bikes isn’t straightforward. What return options have others who’ve done this trip chosen? Any tips or great deals would be much appreciated. Thanks a bunch! !
Hi everyone,
Happy owner of a Pegasus Estremo bike with a Rohloff hub, which is giving me trouble with the SF11-NCX-FT-E-LITE 700C TS 300/0 fork (serial number TD01329060). It’s starting to show its age, and I’d like to repair it to extend the life of my beloved bike.
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Thanks for your help! Have a great day, Alexandre
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Thanks for your help! Have a great day, Alexandre
Hi, I'd like to know if anyone has done this route recently or has reliable info.
Does the track exist, and most importantly, is there sand (for biking)?
Any info is welcome.
Cheers,
diego ambilobe: mangaoka, manondro, ramena vohemar sambava: masondrono, tanambao
diego ambilobe: mangaoka, manondro, ramena vohemar sambava: masondrono, tanambao
Hi there,
New to bike touring,
I’d love to start with a section of the Via Rhona to explore and share (route to be decided).
Looking forward to exchanging tips!
hey everyone,
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
Thanks in advance, Jérôme
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
Thanks in advance, Jérôme
A big thank you to Lazarou for all the info you share in this forum!
I'm passionate about Morocco, which I cycled through back in 2009.
Last year, my wife and I explored the High Atlas by tandem. Completely smitten, we're heading back in April (Anti Atlas) and May (High and Middle Atlas), still on our tandem.
Do you have any info on the track between Amezri and Ali Ait Nito? Are the river crossings in the Tessaout still there? It's not easy to navigate with a loaded tandem... especially if the river level is high due to this year's heavy snowmelt!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
A shout-out to a cycling colleague from Savoie
Claudio specializes in the route of the Savoie lakes Here are his travels Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place Rural and quite peaceful A road cycling route created by Serge B...
N+1 reconnaissance trips on a loop of about 400 km This way, he avoids the SNCF and its troubles http://cbandiera.free.fr/vv/lacs-savoie/recos.php

The latest reconnaissance trip from April to May 2026 http://cbandiera.free.fr/recits/2026-grenoble-H/index.php

Claudio specializes in the route of the Savoie lakes Here are his travels Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place Rural and quite peaceful A road cycling route created by Serge B...
N+1 reconnaissance trips on a loop of about 400 km This way, he avoids the SNCF and its troubles http://cbandiera.free.fr/vv/lacs-savoie/recos.php


The latest reconnaissance trip from April to May 2026 http://cbandiera.free.fr/recits/2026-grenoble-H/index.php

First of all... happy New Year! Wishing you great roads in 2017!
I’ve been traveling for a few years now with a high-quality mountain bike, but it’s equipped with hydraulic disc brakes. I live (pedal) with the constant worry of a breakdown (leak, air bubble, heat causing the fluid to...). My bike mechanic tells me it’s impossible to switch them out for V-brakes.
What do you all think? Am I taking a big risk continuing (alone) with these brakes? Thanks in advance for your great tips!
Hi everyone,
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025. It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border. We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
You’ve been warned.
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025. It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border. We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
You’ve been warned.
Hi there,
I’m planning the route to cycle from Lille to Nordkapp with my partner.
Duration: 3 months, from May 1st to July 31st, 2026.
In the attached details below, I need to add some "non-riding" days (rest days, basically).
So I’m looking to "shorten" the trip by taking ferries or trains for some stretches. Which areas could I skip?
Thanks in advance for your great tips.
Have a good evening.
https://www.komoot.com/fr-fr/collection/4023980/-lille-cap-nord-1er-mai-au-31-juillet-2026?ref=collection
Hi there,
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure! Thanks in advance.
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure! Thanks in advance.
Hi, has anyone recently bought Primus or Butagaz gas, possibly puncture-style, in Dubrovnik or the surrounding area? Same question for Albania... thanks. aichatou
Hi there,
Coming from Laos (*), I’m planning to enter Thailand by bike via the Fourth Thai–Lao Friendship Bridge.
Before this bridge was built, I’d already cycled the road from Louang Namtha to Houei Sai and crossed the river by boat to reach Thailand.
At the time, the condition of that road was impeccable, and most importantly, traffic was light.
So I’m wondering if anyone who’s taken it recently can tell me whether traffic has increased since the bridge opened.
Thanks in advance!
(*) I’m currently cycling in China (Yunnan)
Coming from Laos (*), I’m planning to enter Thailand by bike via the Fourth Thai–Lao Friendship Bridge.
Before this bridge was built, I’d already cycled the road from Louang Namtha to Houei Sai and crossed the river by boat to reach Thailand.
At the time, the condition of that road was impeccable, and most importantly, traffic was light.
So I’m wondering if anyone who’s taken it recently can tell me whether traffic has increased since the bridge opened.
Thanks in advance!
(*) I’m currently cycling in China (Yunnan)
Hi there,
Just a few words about the loop I did by bike in Yunnan.
Entry and exit
I entered China through the Sino-Vietnamese border crossing at Lào Cai / Hekou under the 30-day visa exemption currently available to French nationals and others.
The process was simple and quick. A Chinese police officer even helped me complete my electronic pre-registration at a computer kiosk. I wasn’t aware this formality was required—it’s similar to Thailand’s TM6.
No issues with the bike.
I left the country via the Sino-Laotian border crossing at Mohan / Boten.
The atmosphere was a bit chaotic there, but again, no problems with the bike.
The timing
I visited Yunnan in February 2026.
Weather-wise, at higher altitudes (between 1,500 and 2,000 meters), it was around ten degrees at night and in the mornings, and around twenty degrees at the hottest part of the day.
I had two days of rain, so I took the bus to keep moving. Otherwise, clear blue skies.
Culturally, Chinese New Year fell on February 17th (and the 15 days following), right in the middle of my trip. Because of this, my take on the traffic might be off.
Accommodation and food I always found a hotel to stay in for prices ranging from 8 to 15 €. Except in Kunming (the capital), where many hotels were fully booked (Chinese New Year). I ended up at a 100 € hotel with great value for money.
A bowl of noodles costs about 1.5 € on average.
Onboard electronics Since my smartphone doesn’t support eSIMs, I subscribed to a China plan with my carrier. Otherwise, for much cheaper, Alipay offers eSIMs for foreigners that allow access to services usually blocked for Chinese users (WhatsApp, Facebook, etc.).
An internet connection is essential for paying with Alipay or WeChat, as this payment method is widespread.
I only managed to use Alipay.
Either way, always carry cash because sometimes there’s no signal, or the merchant only accepts WeChat.
Also, it’s best to bring a power adapter when you arrive rather than struggling to find one.
Traffic and roads The Chinese aren’t reckless drivers. They follow traffic rules and watch out for cyclists. This is slightly less true in Xishuangbanna (the region bordering Myanmar and Laos).
In urban areas, there are almost always wide bike lanes, separated from other roads, where bikes, electric mini-scooters, and scooters share the space pretty harmoniously.
The roads are in great condition, and traffic is generally manageable—even light—except for one stretch (Eshan -> Yangwu).
Most traffic is absorbed by expressways, China’s equivalent of highways: toll roads that are off-limits to slow vehicles.
You’re never far from these expressways; sometimes you even ride alongside them, which can be noisy at times.
The climbs are usually reasonable, around 5% to 6%. From what I remember, the steepest section was between Menglun and Mengla, with gradients of 8% to 10%, sometimes more.
Riding at these altitudes—though modest—took a bit of getting used to.
The route I didn’t plan anything in advance. My only goal was to reach Kunming. I don’t know why, but just hearing the name of that city, like Yunnan, always felt dreamy to me.
Here’s the breakdown: Hekou -> Man Hao (94 km); Man Hao -> Yuanyang (64 km); Yuanyang -> Jianshui (bus); Jianshui -> Tong Hai (78 km); Tong Hai -> Chenjiang (85 km); Chenjiang -> Kunming (60 km); Kunming -> Kunyang (60 km); Kunyang -> Eshan (67 km); Eshan -> Yangwu (58 km); Yangwu -> Yuanjiang (59 km); Yuanjiang -> Pu'er (bus); Pu'er -> Dadugang (75 km); Dadugang -> Jinghong (80 km); Jinghong -> Menglun (67 km); Menglun -> Mengyuancun (51 km); Mengyuancun -> Mengla (43 km); Mengla -> Boten (67 km).
Otherwise, I’m currently in Thailand and just hoping my return flight with Qatar won’t get canceled.
Oh well... 😉
Just a few words about the loop I did by bike in Yunnan.
Entry and exit
I entered China through the Sino-Vietnamese border crossing at Lào Cai / Hekou under the 30-day visa exemption currently available to French nationals and others.
The process was simple and quick. A Chinese police officer even helped me complete my electronic pre-registration at a computer kiosk. I wasn’t aware this formality was required—it’s similar to Thailand’s TM6.
No issues with the bike.
I left the country via the Sino-Laotian border crossing at Mohan / Boten.
The atmosphere was a bit chaotic there, but again, no problems with the bike.
The timing
I visited Yunnan in February 2026.
Weather-wise, at higher altitudes (between 1,500 and 2,000 meters), it was around ten degrees at night and in the mornings, and around twenty degrees at the hottest part of the day.
I had two days of rain, so I took the bus to keep moving. Otherwise, clear blue skies.
Culturally, Chinese New Year fell on February 17th (and the 15 days following), right in the middle of my trip. Because of this, my take on the traffic might be off.
Accommodation and food I always found a hotel to stay in for prices ranging from 8 to 15 €. Except in Kunming (the capital), where many hotels were fully booked (Chinese New Year). I ended up at a 100 € hotel with great value for money.
A bowl of noodles costs about 1.5 € on average.
Onboard electronics Since my smartphone doesn’t support eSIMs, I subscribed to a China plan with my carrier. Otherwise, for much cheaper, Alipay offers eSIMs for foreigners that allow access to services usually blocked for Chinese users (WhatsApp, Facebook, etc.).
An internet connection is essential for paying with Alipay or WeChat, as this payment method is widespread.
I only managed to use Alipay.
Either way, always carry cash because sometimes there’s no signal, or the merchant only accepts WeChat.
Also, it’s best to bring a power adapter when you arrive rather than struggling to find one.
Traffic and roads The Chinese aren’t reckless drivers. They follow traffic rules and watch out for cyclists. This is slightly less true in Xishuangbanna (the region bordering Myanmar and Laos).
In urban areas, there are almost always wide bike lanes, separated from other roads, where bikes, electric mini-scooters, and scooters share the space pretty harmoniously.
The roads are in great condition, and traffic is generally manageable—even light—except for one stretch (Eshan -> Yangwu).
Most traffic is absorbed by expressways, China’s equivalent of highways: toll roads that are off-limits to slow vehicles.
You’re never far from these expressways; sometimes you even ride alongside them, which can be noisy at times.
The climbs are usually reasonable, around 5% to 6%. From what I remember, the steepest section was between Menglun and Mengla, with gradients of 8% to 10%, sometimes more.
Riding at these altitudes—though modest—took a bit of getting used to.
The route I didn’t plan anything in advance. My only goal was to reach Kunming. I don’t know why, but just hearing the name of that city, like Yunnan, always felt dreamy to me.
Here’s the breakdown: Hekou -> Man Hao (94 km); Man Hao -> Yuanyang (64 km); Yuanyang -> Jianshui (bus); Jianshui -> Tong Hai (78 km); Tong Hai -> Chenjiang (85 km); Chenjiang -> Kunming (60 km); Kunming -> Kunyang (60 km); Kunyang -> Eshan (67 km); Eshan -> Yangwu (58 km); Yangwu -> Yuanjiang (59 km); Yuanjiang -> Pu'er (bus); Pu'er -> Dadugang (75 km); Dadugang -> Jinghong (80 km); Jinghong -> Menglun (67 km); Menglun -> Mengyuancun (51 km); Mengyuancun -> Mengla (43 km); Mengla -> Boten (67 km).
Otherwise, I’m currently in Thailand and just hoping my return flight with Qatar won’t get canceled.
Oh well... 😉
Hi! I’m planning to visit the Stockholm Archipelago by bike in early April.
Do you know if the boats will be running between the different islands at that time of year? For those who’ve already been, all your tips and recommendations are welcome—accommodation, etc. Also, do you know where I can rent a bike in Stockholm? Thanks so much in advance for your help!
Hello there, pedal-powered Young Boys!
Claudio (still from Faverges)
dreaming about a cycling getaway in Italy from Faverges (train all the way to Turin)
from Turin down to Venice along the Po River and back via the Padana (Alta Italia da attraversare – Northern Italy to cross)
The tricky part is getting from Chioggia to Venice.
I read it’s possible by hopping on a boat from island to island,
but it sounds a bit stressful.
Has anyone already tackled this route?
Thanks, and cheers to all! http://cbandiera.free.fr/parcours/Padania/
Claudio
Thanks, and cheers to all! http://cbandiera.free.fr/parcours/Padania/
Claudio

Hi there,
I’m currently looking for a bike to do my first bike trip across France, with the ultimate goal of cycling through Latin America. I’ve got a lot of questions and I’d love to hear if you have any answers or advice to share. First off, I’ve been through this before with hiking. I want to get top-quality gear right away. When I started hiking, I ended up buying everything three times—first beginner gear, then intermediate, then expert, etc. For biking, I’d prefer to skip that process and invest right now in a bike that could ideally handle Latin America. I’ve set a total max budget of around 5000 € (roughly 4000–4500 € for the bike and the rest for accessories: panniers, helmet, cycling shorts, etc.).
So, I’ve got quite a few questions:
* I’ve read in several places that some people recommend buying the bike directly in Latin America. Since I need a first bike to train in Europe, would it be better to buy an entry-level bike in France (and sell it before the big departure)? Or is it preferable to start right away with my final bike to get used to it? Is buying it there just to save a bit of money?
* For a long-term trip (around six months) in Latin America, is it better to go for a gravel bike or a mountain bike?
* Should I buy a new bike or a refurbished one? Even more so given that I’m planning a long trip—could a refurbished bike end up causing more breakdowns?
If you have any advice on models, technical features to prioritize, or recommended sellers or resellers, I’d love to hear it. I’m a total beginner—I’ve only just started watching videos and reading up on the subject, and all the technical specs are new to me!
Thanks in advance for your help!
I’m currently looking for a bike to do my first bike trip across France, with the ultimate goal of cycling through Latin America. I’ve got a lot of questions and I’d love to hear if you have any answers or advice to share. First off, I’ve been through this before with hiking. I want to get top-quality gear right away. When I started hiking, I ended up buying everything three times—first beginner gear, then intermediate, then expert, etc. For biking, I’d prefer to skip that process and invest right now in a bike that could ideally handle Latin America. I’ve set a total max budget of around 5000 € (roughly 4000–4500 € for the bike and the rest for accessories: panniers, helmet, cycling shorts, etc.).
So, I’ve got quite a few questions:
* I’ve read in several places that some people recommend buying the bike directly in Latin America. Since I need a first bike to train in Europe, would it be better to buy an entry-level bike in France (and sell it before the big departure)? Or is it preferable to start right away with my final bike to get used to it? Is buying it there just to save a bit of money?
* For a long-term trip (around six months) in Latin America, is it better to go for a gravel bike or a mountain bike?
* Should I buy a new bike or a refurbished one? Even more so given that I’m planning a long trip—could a refurbished bike end up causing more breakdowns?
If you have any advice on models, technical features to prioritize, or recommended sellers or resellers, I’d love to hear it. I’m a total beginner—I’ve only just started watching videos and reading up on the subject, and all the technical specs are new to me!
Thanks in advance for your help!

