PS: On peut laisser les cartouches à valve débouchées sans rien dessus sans problème?
Réchauds à gaz
by StanleyH
This discussion is in French, the community’s main language.
Original post
Bonsoir,
J'ai acheté un réchaud à gaz Edelrid Kiro St. Le vendeur m'a dit qu'il était compatible avec toutes les cartouches à gaz.
http://www.croque-montagne.fr/...e-vente__p37575.html
Pour les cartouches à valve, il m'a vendu un adaptateur Edelrid: http://www.expe.fr/...valve-m41-p2938.html
J'ai fait un premier essai, et ça ne marche pas.
J'ai utilisé une cartouche Camping Gaz CV 300 Plus.
Le réchaud se fixe sur la cartouche, mais le gaz ne sort pas (en essayant de fixer l'adaptateur, j'ai fait sortir beaucoup de gaz, donc je me dis qu'elle était peut-être presque vide; mais quand on secoue la cartouche, "on ne dirait pas").
Je ne parviens pas à fixer l'adaptateur pour valve sur la cartouche (CV 300 Plus).
Je ne sais pas d'où vient le problème.
J'ai peur que le réchaud ne soit compatible qu'avec les cartouches Edelrid? (C'est indiqué sur le mode d'emploi, mais je crois avoir lu quelque part qu'il ne fallait pas faire attention à ça).
Sinon le problème vient peut-être du "Plus" et du "Easy Clic Plus".
Pouvez-vous m'aider? 😇
PS: On peut laisser les cartouches à valve débouchées sans rien dessus sans problème?
PS: On peut laisser les cartouches à valve débouchées sans rien dessus sans problème?
J'ai pas compris, c'est bien un réchaud avec des cartouches à visser ?
Si oui, il doit surement être compatible avec toutes les cartouches ( Coleman, primus, msr, optimus, etc ... ) sauf les camping gaz. Camping gaz étant une " exeption culturelle française " qu'on ne trouve qu'en France et quelques pays limithrophes.
Si tu veux mettre des camping gaz à valve il te faut cet adaptateur là :
http://www.croque-montagne.fr/...-camping__p2167.html
PS: On peut laisser les cartouches à valve débouchées sans rien dessus sans problème?
Des à vis, sans problème. C'est fait pour.
Si oui, il doit surement être compatible avec toutes les cartouches ( Coleman, primus, msr, optimus, etc ... ) sauf les camping gaz. Camping gaz étant une " exeption culturelle française " qu'on ne trouve qu'en France et quelques pays limithrophes.
Si tu veux mettre des camping gaz à valve il te faut cet adaptateur là :
http://www.croque-montagne.fr/...-camping__p2167.html
PS: On peut laisser les cartouches à valve débouchées sans rien dessus sans problème?
Des à vis, sans problème. C'est fait pour.
You own a car, not the road !
Je n'y connais rien. Le réchaud se visse sur la cartouche, donc c'est un réchaud à vis, c'est bien ça? Les autres réchauds sont des réchauds à perforation?
Donc je peux laisser une "CV 300 Plus" ouverte à l'air libre sans problème si j'ai bien compris.
Je n'y connais rien. Le réchaud se visse sur la cartouche, donc c'est un réchaud à vis, c'est bien ça?
Tout à fait.
Les autres réchauds sont des réchauds à perforation?
Oui et je conseille pas. J'ai déjà vu un collègue de rando vider totalement sa cartouche en quelques secondes en foirant la perforation.
Donc je peux laisser une "CV 300 Plus" ouverte à l'air libre sans problème si j'ai bien compris.
J'ai une CV 270 entreposée depuis plus d'un an ( elle a déjà servie ) dans la pièce ou je dors et je vais plutôt bien 😉
Les seuls réchauds multi cartouches qui prennent toutes les cartouches y compris les camping gaz, à ma connaissqance c'est le MSR superfly et le primus duo.
Tout à fait.
Les autres réchauds sont des réchauds à perforation?
Oui et je conseille pas. J'ai déjà vu un collègue de rando vider totalement sa cartouche en quelques secondes en foirant la perforation.
Donc je peux laisser une "CV 300 Plus" ouverte à l'air libre sans problème si j'ai bien compris.
J'ai une CV 270 entreposée depuis plus d'un an ( elle a déjà servie ) dans la pièce ou je dors et je vais plutôt bien 😉
Les seuls réchauds multi cartouches qui prennent toutes les cartouches y compris les camping gaz, à ma connaissqance c'est le MSR superfly et le primus duo.
You own a car, not the road !
Sur mon adaptateur Edelrid, il y a marqué "adaptateur pour cartouche à soupape". La CV 300 Plus est-elle une cartouche à soupape? Qu'est-ce qu'une cartouche à soupape?
Bonjour,
J'ai acheté une cartouche Primus 230g (Butane Isobutane Propane "4 saisons mixtes"): ça fonctionne. Cette cartouche est bien une cartouche à valve, càd que je peux dévisser mon réchaud de la cartouche sans qu'il y ait de risque de fuite? Je demande car sur la cartouche, il n'y a pas marqué "à valve".
Par ailleurs, je me demande à quoi sert mon "adaptateur à soupape" s'il n'est pas compatible avec les cartouches camping gaz.
il y a une solution simple
achète un réchaud compatible camping gaz que tu emmène en plus :
le twister : il est pliable, ne tient pas de place et est léger (235 g) et solide
remarque : l'allumage piezo est une vraie merde
il se vend seul 35 E chez decathlon
sinon
le système de camping gaz (voir mode d'emploi sur la cartouche) :
enfoncer puis tourner jusqu'au clic
oui on peut laisser laisser une cartouche à valve sans rien dessus en randonnée je démonte tous les matins l'ensemble réchaud et cartouche
achète un réchaud compatible camping gaz que tu emmène en plus :
le twister : il est pliable, ne tient pas de place et est léger (235 g) et solide
remarque : l'allumage piezo est une vraie merde
il se vend seul 35 E chez decathlon
sinon
le système de camping gaz (voir mode d'emploi sur la cartouche) :
enfoncer puis tourner jusqu'au clic
oui on peut laisser laisser une cartouche à valve sans rien dessus en randonnée je démonte tous les matins l'ensemble réchaud et cartouche
Les autres réchauds sont des réchauds à perforation?
Ouipas forcément : il existe 2 standards différents de cartouches à vis : Camping Gaz, et les autres (Primus, Coleman, MSR etc etc).
Camping Gaz a beau être une exception, ces cartouches sont largement répandues en Europe occidentale, à tel point que parfois, on trouve des cartouches à vis Camping Gaz et pas les autres . Ca m'est arrivé l'été dernier en Slovénie : depuis j'ai acheté un adaptateur vis-vis Markhill à 12 € qui ressemble énormément à celui du lien donné par StanleyH chez Expé, mais je ne l'ai pas testé. Il sera peut-être plus prudent, au vu du message de StanleyH, que je le fasse avant de repartir.
Je ne sais pas si le problème peut venir de là, mais a priori, il pourrait exister 2 types d'adaptateur : cartouches autres /réchaud CampinGaz, ou l'inverse, et les descriptifs des catalogues ne sont pas toujours très explicites sur ce point... Sinon, Primus et MSR proposent chacun un petit réchaud à gaz compatible avec les 2 standards de cartouches à vis, mais ça revient bien plus cher qu'un adaptateur si on a déjà un réchaud.
je rectifie une petite erreur dans mon message ci-dessus : il fallait lire "il existe 2 standards de cartouches à valve", pas "2 standards de cartouches à vis". Les cartouches Camping Gaz à valve ont un embout clipsable et non un pas de vis.
Les seuls réchauds multi cartouches qui prennent toutes les cartouches y compris les camping gaz, à ma connaissance c'est le MSR superfly et le primus duo.
je n'avais plus le nom des modèles en tête, mais c'est ça et je n'en connais pas d'autre non pus.
Les seuls réchauds multi cartouches qui prennent toutes les cartouches y compris les camping gaz, à ma connaissance c'est le MSR superfly et le primus duo.
je n'avais plus le nom des modèles en tête, mais c'est ça et je n'en connais pas d'autre non pus.
je n'avais plus le nom des modèles en tête, mais c'est ça et je n'en connais pas d'autre non pus.
Il me semble avoir vu le Primus Duo chez decathlon pour info. Mais bon, si il a déjà un réchaud, ça lui reviendra moins cher d'acheter l'adaptateur markill je pense. En plus le Primus Duo est assez gros et lourd je trouve ...
Il me semble avoir vu le Primus Duo chez decathlon pour info. Mais bon, si il a déjà un réchaud, ça lui reviendra moins cher d'acheter l'adaptateur markill je pense. En plus le Primus Duo est assez gros et lourd je trouve ...
You own a car, not the road !
Merci pour vos réponses.
Pour l'adaptateur Merkill, faut-il forcer pour que ça rentre?
Peut-être qu'au marteau, ça peut marcher avec mon Edelrid...
Peut-être qu'au marteau, ça peut marcher avec mon Edelrid...
Ouais , et si ça tient pas un bon coup de soudure à l'arc aussi pendant que tu y es 😉
J'espère que tu plaisantes lorsque tu écris vouloir faire entrer au marteau un adaptateur ou un bruleur sur une cartouche de gaz : surtout préviens tes voisins de camping avant, pour qu'ils aient le temps de s'éloigner car 300 ou 400g de butane-propane qui pètent ça fait déjà des dégâts 🏴☠️
à+ François
Ouais , et si ça tient pas un bon coup de soudure à l'arc aussi pendant que tu y es 😉
J'espère que tu plaisantes lorsque tu écris vouloir faire entrer au marteau un adaptateur ou un bruleur sur une cartouche de gaz : surtout préviens tes voisins de camping avant, pour qu'ils aient le temps de s'éloigner car 300 ou 400g de butane-propane qui pètent ça fait déjà des dégâts 🏴☠️
à+ François
Galeries de photos sur l'Islande à vélo:http://cyclophoto.free.fr/
Voyage à vélo en 2017 Asie centrale (Pamir) puis Corée et Japon : http://resilience-a-velo.over-blog.com/
Oui, je plaisantais. Désolé, j'avais oublié les smileys. ^^
j'aimerai éclaircir une confusion.
1. ne pas confondre le système qui ferme automatiquement la cartouche quand on enlève le réchaud et et le système d'accouplement de la cartouche et du réchaud.
- le système qui ferme automatiquement la cartouche :
c'est une soupape (autre nom de la soupape "valve")
une soupape laisse passer dans un sens unique un fluide
ça peut être un clapet ou une bille
remarque : en électronique on utilise ce nom aussi pour un dispositif laissant passer le courant dans un sens unique les fameuses désormais rares ampoules valves)
- le système de verrouillage à vis
le réchaud est muni d'une vis mâle qui vient se visser sur la vis femelle de la cartouche
- le système camping gaz
un système à machoire qui s'écartent contre les parois de la partie femelle de la cartouche
ce système a connu plusieurs évolutions toutes compatibles
2. cartouche et bouteille de gaz
camping gaz fait des cartouches et des bouteilles
- les cartouches sont à faible contenance et légères :
- cartouche qu'on perfore avec le réchaud et qu'on peut démonter uniquement quand la cartouche est vide car elle ne contient pas de fermeture automatique à soupape
- cartouche à soupape à fermeture automatique
on peut les démonter alors qu'elles ne sont pas vides
- les bouteilles même les petites sont à grande contenance et lourde
elles sont à : - fermeture automatique à soupape (on voit bien celle-ci qui est une bille) + un bouchon qui se visse - vis (nom compatible avec les autres systèmes à vis)
P.S. si quelqu'un pouvait faire un bilan de ces différents adaptateurs pour réchaud à vis pour les accoupler à une cartouche camping gaz : qualité, facilité d'usage, tenue etc.
remarque : il serait bien que l'Europe impose un standard unique comme elles l'a fait pour l'accouplement des chargeurs et des mobiles
1. ne pas confondre le système qui ferme automatiquement la cartouche quand on enlève le réchaud et et le système d'accouplement de la cartouche et du réchaud.
- le système qui ferme automatiquement la cartouche :
c'est une soupape (autre nom de la soupape "valve")
une soupape laisse passer dans un sens unique un fluide
ça peut être un clapet ou une bille
remarque : en électronique on utilise ce nom aussi pour un dispositif laissant passer le courant dans un sens unique les fameuses désormais rares ampoules valves)
- le système de verrouillage à vis
le réchaud est muni d'une vis mâle qui vient se visser sur la vis femelle de la cartouche
- le système camping gaz
un système à machoire qui s'écartent contre les parois de la partie femelle de la cartouche
ce système a connu plusieurs évolutions toutes compatibles
2. cartouche et bouteille de gaz
camping gaz fait des cartouches et des bouteilles
- les cartouches sont à faible contenance et légères :
- cartouche qu'on perfore avec le réchaud et qu'on peut démonter uniquement quand la cartouche est vide car elle ne contient pas de fermeture automatique à soupape
- cartouche à soupape à fermeture automatique
on peut les démonter alors qu'elles ne sont pas vides
- les bouteilles même les petites sont à grande contenance et lourde
elles sont à : - fermeture automatique à soupape (on voit bien celle-ci qui est une bille) + un bouchon qui se visse - vis (nom compatible avec les autres systèmes à vis)
P.S. si quelqu'un pouvait faire un bilan de ces différents adaptateurs pour réchaud à vis pour les accoupler à une cartouche camping gaz : qualité, facilité d'usage, tenue etc.
remarque : il serait bien que l'Europe impose un standard unique comme elles l'a fait pour l'accouplement des chargeurs et des mobiles
ne pas confondre le système qui ferme automatiquement la cartouche quand on enlève le réchaud et et le système d'accouplement de la cartouche et du réchaud.
très juste. Mais en pratique ça ne change pas grand chose puisque entre Camping Gaz et les autres cartouches à valve, les 2 dispositifs (fixation et déclenchement soupape) sont différents.
le réchaud est muni d'une vis mâle qui vient se visser sur la vis femelle de la cartouche
ou, en l'occurence, l'inverse pour les réchauds Primus MSR Optimus etc (pas de vis femelle côté réchaud)
il serait bien que l'Europe impose un standard unique
oui, ce serait plus utile que de vouloir standardiser les fromages !
très juste. Mais en pratique ça ne change pas grand chose puisque entre Camping Gaz et les autres cartouches à valve, les 2 dispositifs (fixation et déclenchement soupape) sont différents.
le réchaud est muni d'une vis mâle qui vient se visser sur la vis femelle de la cartouche
ou, en l'occurence, l'inverse pour les réchauds Primus MSR Optimus etc (pas de vis femelle côté réchaud)
il serait bien que l'Europe impose un standard unique
oui, ce serait plus utile que de vouloir standardiser les fromages !
remarque : il serait bien que l'Europe impose un standard unique comme elles l'a fait pour l'accouplement des chargeurs et des mobiles
D'accord mais qu'est ce qui te dit qu'elle ne s'alignerait pas plutot sur le système camping gaz et a son système de cartouches à perforation en prime ( encore largement répendu dans certains pays de l'UE ) ? On aurait l'air malin tiens ...
D'autant que la priorité de Camping-Gaz semble aller plus à la démocratisation du pique-nique et aux joies du camping en famille qu'à la randonnée, au trek ou à l'alpinisme. Ne parlons même pas des globetrotteurs et autres cyclo/marcheurs de l'extreme pour qui la marque ne propose aucune solution.
D'accord mais qu'est ce qui te dit qu'elle ne s'alignerait pas plutot sur le système camping gaz et a son système de cartouches à perforation en prime ( encore largement répendu dans certains pays de l'UE ) ? On aurait l'air malin tiens ...
D'autant que la priorité de Camping-Gaz semble aller plus à la démocratisation du pique-nique et aux joies du camping en famille qu'à la randonnée, au trek ou à l'alpinisme. Ne parlons même pas des globetrotteurs et autres cyclo/marcheurs de l'extreme pour qui la marque ne propose aucune solution.
You own a car, not the road !
remarque : il serait bien que l'Europe impose un standard unique (...)
D'accord mais qu'est ce qui te dit qu'elle ne s'alignerait pas plutot sur le système camping gaz et a son système de cartouches à perforation en prime (...)
on parlait d'un standard pour les cartouches à valve. Le système à percussion ne convient pas pour les réchauds très compacts qu'on veut pouvoir démonter après chaque utilisation.
La priorité de Camping-Gaz semble aller plus à la démocratisation du pique-nique et aux joies du camping en famille qu'à la randonnée, au trek ou à l'alpinisme
très juste. Il est donc finalement assez logique qu'il y ait plusieurs standards : la fixation à valve + vis a un meilleur rapport perfomances/poids, mais coute un peu plus cher à la production (usinage plus précis nécessaire).
D'accord mais qu'est ce qui te dit qu'elle ne s'alignerait pas plutot sur le système camping gaz et a son système de cartouches à perforation en prime (...)
on parlait d'un standard pour les cartouches à valve. Le système à percussion ne convient pas pour les réchauds très compacts qu'on veut pouvoir démonter après chaque utilisation.
La priorité de Camping-Gaz semble aller plus à la démocratisation du pique-nique et aux joies du camping en famille qu'à la randonnée, au trek ou à l'alpinisme
très juste. Il est donc finalement assez logique qu'il y ait plusieurs standards : la fixation à valve + vis a un meilleur rapport perfomances/poids, mais coute un peu plus cher à la production (usinage plus précis nécessaire).
D'accord mais qu'est ce qui te dit qu'elle ne s'alignerait pas plutôt sur le système camping gaz et a son système de cartouches à perforation en prime ( encore largement répendu dans certains pays de l'UE ) ? On aurait l'air malin tiens ...
je ne comprends pas ta crainte :
le système démontable comprend la possibilité de démonter et de ne pas démonter donc si un standard est à chercher c'est plutôt du coté du système démontable.
d'autre part le système démontable de camping gaz est aussi bien fait pour le camping que pour l'itinérance
ensuite il y a le contenu gazeux qui est plus ou moins fait pour affronter le froid (je pense aux alpinistes) mais là aussi les cartouches de camping-gaz sont un mélange de propane et butane. et puis pour la majorité de nos randonnées il n'y a pas à se soucier de température froide extrême.
je ne comprends pas ta crainte :
le système démontable comprend la possibilité de démonter et de ne pas démonter donc si un standard est à chercher c'est plutôt du coté du système démontable.
d'autre part le système démontable de camping gaz est aussi bien fait pour le camping que pour l'itinérance
ensuite il y a le contenu gazeux qui est plus ou moins fait pour affronter le froid (je pense aux alpinistes) mais là aussi les cartouches de camping-gaz sont un mélange de propane et butane. et puis pour la majorité de nos randonnées il n'y a pas à se soucier de température froide extrême.
d'autre part le système démontable de camping gaz est aussi bien fait pour le camping que pour l'itinérance
Les réchauds camping gaz sont généralement plus lourds et volumineux. Faire des produits légers et compactes ( qui se rangent dans une popote par exemple ) ne semble pas être leur priorité.
ensuite il y a le contenu gazeux qui est plus ou moins fait pour affronter le froid (je pense aux alpinistes)
C'est un mélange butane/propane 80/20 comme toutes les cartouches je pense. Les alpinistes qui vont au dessus de 4000m utilisent des réchauds à essence en général. Le problème étant plus lié à la pression qu'il fait à cette altitude, qu'à la température. Ce que je voulais dire, c'est que même si à ce niveau, camping gaz n'y peut rien, ils ne proposent pas de réchauds à essence non plus, à ma connaissance.
Les réchauds camping gaz sont généralement plus lourds et volumineux. Faire des produits légers et compactes ( qui se rangent dans une popote par exemple ) ne semble pas être leur priorité.
ensuite il y a le contenu gazeux qui est plus ou moins fait pour affronter le froid (je pense aux alpinistes)
C'est un mélange butane/propane 80/20 comme toutes les cartouches je pense. Les alpinistes qui vont au dessus de 4000m utilisent des réchauds à essence en général. Le problème étant plus lié à la pression qu'il fait à cette altitude, qu'à la température. Ce que je voulais dire, c'est que même si à ce niveau, camping gaz n'y peut rien, ils ne proposent pas de réchauds à essence non plus, à ma connaissance.
You own a car, not the road !
Pour l'adaptateur Merkill, faut-il forcer pour que ça rentre?
je "déterre" ce fil de discussion car j'ai utilisé récemment l'adaptateur en question (Marhill ou Edelrid) sur une cartouche à valve Campig Gaz pour mon petit réchaud Primus. StanleyH a peut-être trouvé depuis longtemps, mais si ça peut servir à d'autres...
Quand on enfonce l'adapteur il commence par ouvrir la valve (on entend un petit "pschitt" et on sent l'odeur du gaz), et pour verrouiller, il faut tout de suite après tourner la bague inférieure de l'adaptateur en sens inverse des aiguilles d'une montre, en maintenant la bague supérieure fixe. Pour démonter on maintient la bague inférieure fixe et on tourne la bague supérieure dans le sens inverse des aiguilles d'une montre.
je "déterre" ce fil de discussion car j'ai utilisé récemment l'adaptateur en question (Marhill ou Edelrid) sur une cartouche à valve Campig Gaz pour mon petit réchaud Primus. StanleyH a peut-être trouvé depuis longtemps, mais si ça peut servir à d'autres...
Quand on enfonce l'adapteur il commence par ouvrir la valve (on entend un petit "pschitt" et on sent l'odeur du gaz), et pour verrouiller, il faut tout de suite après tourner la bague inférieure de l'adaptateur en sens inverse des aiguilles d'une montre, en maintenant la bague supérieure fixe. Pour démonter on maintient la bague inférieure fixe et on tourne la bague supérieure dans le sens inverse des aiguilles d'une montre.
Est-ce que la taille de l'embout de la cartouche de gaz sur lequel on vis le réchaud est standard ou y'a t'il plusieurs tailles? Car j'ai un réchaud dont la taille de la partie qu'on vis sur la cartouche me semble assez petit, je me demande si je ne vais pouvoir utiliser que des cartouche de gaz de petites taille?
Est-ce que la taille de l'embout de la cartouche de gaz sur lequel on vis le réchaud est standard ou y'a t'il plusieurs tailles?
Avec les petits réchauds, on peut utiliser des cartouches contenant 100, 200 ou 400 g de gaz.
Je crois me souvenir qu'il existe un autre standard pour les grands réchauds (les engins sur lesquels on peut faire cuire 2 casseroles en même temps), mais ces réchauds et ces bouteilles de gaz ne sont pas du tout adaptées au gabarit des sacoches vélo, c'est fait pour les campeurs qui voyagent en voiture.
Avec les petits réchauds, on peut utiliser des cartouches contenant 100, 200 ou 400 g de gaz.
Je crois me souvenir qu'il existe un autre standard pour les grands réchauds (les engins sur lesquels on peut faire cuire 2 casseroles en même temps), mais ces réchauds et ces bouteilles de gaz ne sont pas du tout adaptées au gabarit des sacoches vélo, c'est fait pour les campeurs qui voyagent en voiture.
Log in first, then come back to this page.
You might also like
Densha Otaku - Lesser-Known Regions
Two weeks under the Puglia sun
Back to Swedish Lapland: Trek on the Kungsleden and Crossing Sarek
Off on a winter adventure in the American West!
3 weeks in Laos, stress-free
Draw Me Your Japan...
South Africa in safari mode: February/March 2026
Back in Tunisia (live account)
More discussions
Bonjour,
Je souhaite faire Morlaix Brest ( via Roscoff et la littoral V45) nous commencerons à rouler le 16 aout pour 13 jours (avec des pauses visites iles , surf etc..) Est ce qu'il y a beaucoup de circulation à cette époque de l'année car j'ai 2 enfants de11 et 13 ans et on n'aime pas rouler au milieu des voitures (on a déjà fait velomaritime ; Caen - Cherbourg, loire : Orléans- Saumur, Velodyssée : Nantes - Royans, les canaux : nivernais , bourgogne etc ... et il y avait beaucoup de voies réservées aux vélos ce qui n'est pas le cas sur cet itinéraire).
Merci de votre aide si vous avez déjà parcourue cet itinéraire fin aout. Virginie
Je souhaite faire Morlaix Brest ( via Roscoff et la littoral V45) nous commencerons à rouler le 16 aout pour 13 jours (avec des pauses visites iles , surf etc..) Est ce qu'il y a beaucoup de circulation à cette époque de l'année car j'ai 2 enfants de11 et 13 ans et on n'aime pas rouler au milieu des voitures (on a déjà fait velomaritime ; Caen - Cherbourg, loire : Orléans- Saumur, Velodyssée : Nantes - Royans, les canaux : nivernais , bourgogne etc ... et il y avait beaucoup de voies réservées aux vélos ce qui n'est pas le cas sur cet itinéraire).
Merci de votre aide si vous avez déjà parcourue cet itinéraire fin aout. Virginie
Bonjour,
Ca y est j'ai mon billet d'avion, départ mi novembre, retour mi-mars. arrivée santiago et je repars depuis Buenos Aires. J'ai deja été dans le sud de l'argentine, notamment le parc torres del Paine, et j'ai très envie d'y retourner pour faire le grand W, j'avais fait le petit. Je souhaite aussi randonner qq foois et pourquoi pas faire un sommet. Je grimpe et je fais occasionnellement de l'alpinisme, donc ce sera avec un guide de toute façon.
Je compte démarrer vers temuco au chili, j'ai dans l'idée d'aller vers les lac, puis prendre la careterra austral. Je sais pas si je vais aller jusqu'à Ushuaia, parait que cela vaut pas tant que cela la peine, à part pour dire qu'on a été au bout de la terre.
j'ai vu vite fait qu'il y'avait des lac en Argentine.
Je n'ai pas d'itinéraire précis. Mais ce que je souhiaterai, c'est qu'une fois arriver le plus au sud de mon vooayage, faire une mini croisière pour voir des annimaux. Des conseils pour cela?
qu'avez vous pris comme sac de couchage? un 0 degré suffit?
et ultime question, réchaud à essence ou est-ce que je peux m'en sortir avec mon réchaud gaz?
Nath
Ca y est j'ai mon billet d'avion, départ mi novembre, retour mi-mars. arrivée santiago et je repars depuis Buenos Aires. J'ai deja été dans le sud de l'argentine, notamment le parc torres del Paine, et j'ai très envie d'y retourner pour faire le grand W, j'avais fait le petit. Je souhaite aussi randonner qq foois et pourquoi pas faire un sommet. Je grimpe et je fais occasionnellement de l'alpinisme, donc ce sera avec un guide de toute façon.
Je compte démarrer vers temuco au chili, j'ai dans l'idée d'aller vers les lac, puis prendre la careterra austral. Je sais pas si je vais aller jusqu'à Ushuaia, parait que cela vaut pas tant que cela la peine, à part pour dire qu'on a été au bout de la terre.
j'ai vu vite fait qu'il y'avait des lac en Argentine.
Je n'ai pas d'itinéraire précis. Mais ce que je souhiaterai, c'est qu'une fois arriver le plus au sud de mon vooayage, faire une mini croisière pour voir des annimaux. Des conseils pour cela?
qu'avez vous pris comme sac de couchage? un 0 degré suffit?
et ultime question, réchaud à essence ou est-ce que je peux m'en sortir avec mon réchaud gaz?
Nath
Bonjour à tous,
Cet été nous prévoyons de pédaler sur l'EV 19 qui longe la Meuse de Langres jusqu'à Rotterdam. Mon questionnement concerne le retour jusqu'à Nantes. Savez vous quel est le meilleur retour possible? J'en appelle à vos expériences. Je voyais que Flixbus ne prenait pas les vélos. En train, je pense que c'est possible avec de multiples petits trains. On se questionnait aussi sur l'existence d'un bateau qui irait de Rotterdam jusqu'à St Nazaire et qui pourrait charger des passagers avec vélos.
Toutes vos expériences partagées nous seront bien utiles et nous vous en remercions. Bonne soirée
Cet été nous prévoyons de pédaler sur l'EV 19 qui longe la Meuse de Langres jusqu'à Rotterdam. Mon questionnement concerne le retour jusqu'à Nantes. Savez vous quel est le meilleur retour possible? J'en appelle à vos expériences. Je voyais que Flixbus ne prenait pas les vélos. En train, je pense que c'est possible avec de multiples petits trains. On se questionnait aussi sur l'existence d'un bateau qui irait de Rotterdam jusqu'à St Nazaire et qui pourrait charger des passagers avec vélos.
Toutes vos expériences partagées nous seront bien utiles et nous vous en remercions. Bonne soirée
Coming soon:
https://www.Biclou.com/parcours/durance/
Starting from Faverges: 900 km over 9 days

Here’s the detailed Durance route starting from Briançon

Here’s the detailed Durance route starting from Briançon

Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
Hi there,
I’m planning to build a new touring bike. I want to prioritize lightness. That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads. The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper. I’m particularly considering the RockShox Rudy Ultimate XPLR fork. Unlike MTB forks, its travel is short: either 30 mm or 40 mm. It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring. And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear. More generally, how reliable are these kinds of forks?
Thanks in advance
I’m planning to build a new touring bike. I want to prioritize lightness. That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads. The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper. I’m particularly considering the RockShox Rudy Ultimate XPLR fork. Unlike MTB forks, its travel is short: either 30 mm or 40 mm. It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring. And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear. More generally, how reliable are these kinds of forks?
Thanks in advance
Hi everyone,
I wanted to share with you the incredible feat my friend José, who’s 72 years old, is currently undertaking. He left Auterive near Toulouse on Monday, May 18, 2026, on his non-electric bike, heading for the North Cape in Norway!
You can follow his route on the link below—he’s currently in Sweden:
https://thierry-thomas.travelmap.net/jose-de-toulouse-a-nord-cap-2026
You can zoom in on the map and click on each stopover town to see the photos
Hi there!
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.

It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.




One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.


We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.



Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
S.
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.

It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.




One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.


We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.



Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
S.
Hi there, we’re a group of 4 cyclists looking to get from Treviso in Italy to Munich with our 4 non-folding bikes. It seems complicated! Are there any solutions? Thanks so much.
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed story being posted online soon 1100 km in 11 days beautiful and varied regions
claudio

the trip was completed story being posted online soon 1100 km in 11 days beautiful and varied regions
claudio

Hi, I'm looking for a Pino tandem bike for sale in Quebec and I can't find any. Does anyone have any info, please? Thanks a bunch!
Hi there, we’re planning a Munich to Venice bike trip at the end of June 2026. Getting back from Venice to Toulouse by train with 4 bikes isn’t straightforward. What return options have others who’ve done this trip chosen? Any tips or great deals would be much appreciated. Thanks a bunch! !
Hi everyone,
Happy owner of a Pegasus Estremo bike with a Rohloff hub, which is giving me trouble with the SF11-NCX-FT-E-LITE 700C TS 300/0 fork (serial number TD01329060). It’s starting to show its age, and I’d like to repair it to extend the life of my beloved bike.
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Thanks for your help! Have a great day, Alexandre
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Thanks for your help! Have a great day, Alexandre
Hi, I'd like to know if anyone has done this route recently or has reliable info.
Does the track exist, and most importantly, is there sand (for biking)?
Any info is welcome.
Cheers,
diego ambilobe: mangaoka, manondro, ramena vohemar sambava: masondrono, tanambao
diego ambilobe: mangaoka, manondro, ramena vohemar sambava: masondrono, tanambao
Hi there,
New to bike touring,
I’d love to start with a section of the Via Rhona to explore and share (route to be decided).
Looking forward to exchanging tips!
hey everyone,
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
Thanks in advance, Jérôme
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
Thanks in advance, Jérôme
A big thank you to Lazarou for all the info you share in this forum!
I'm passionate about Morocco, which I cycled through back in 2009.
Last year, my wife and I explored the High Atlas by tandem. Completely smitten, we're heading back in April (Anti Atlas) and May (High and Middle Atlas), still on our tandem.
Do you have any info on the track between Amezri and Ali Ait Nito? Are the river crossings in the Tessaout still there? It's not easy to navigate with a loaded tandem... especially if the river level is high due to this year's heavy snowmelt!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
A shout-out to a cycling colleague from Savoie
Claudio specializes in the route of the Savoie lakes Here are his travels Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place Rural and quite peaceful A road cycling route created by Serge B...
N+1 reconnaissance trips on a loop of about 400 km This way, he avoids the SNCF and its troubles http://cbandiera.free.fr/vv/lacs-savoie/recos.php

The latest reconnaissance trip from April to May 2026 http://cbandiera.free.fr/recits/2026-grenoble-H/index.php

Claudio specializes in the route of the Savoie lakes Here are his travels Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place Rural and quite peaceful A road cycling route created by Serge B...
N+1 reconnaissance trips on a loop of about 400 km This way, he avoids the SNCF and its troubles http://cbandiera.free.fr/vv/lacs-savoie/recos.php


The latest reconnaissance trip from April to May 2026 http://cbandiera.free.fr/recits/2026-grenoble-H/index.php

Tout d'abord... bonne année ! De belles routes à vous en 2017 !
Je voyage depuis quelques années avec un VTT de très bonne qualité mais équipé de freins à disques hydrauliques. Je vis (pédale) avec l'inquiétude d'avoir une panne (fuite, bulle d'air, chaleur qui fait que le liquide...). Mon vélociste me dit qu'il est impossible de les changer pour des V brakes.
Qu'en pensez-vous ? Est-ce que je prends un gros risque à continuer (seule) avec ces freins ? D'avance je vous remercie pour vos bonnes idées.
Hi everyone,
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025. It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border. We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
You’ve been warned.
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025. It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border. We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
You’ve been warned.
Hi there,
I’m planning the route to cycle from Lille to Nordkapp with my partner.
Duration: 3 months, from May 1st to July 31st, 2026.
In the attached details below, I need to add some "non-riding" days (rest days, basically).
So I’m looking to "shorten" the trip by taking ferries or trains for some stretches. Which areas could I skip?
Thanks in advance for your great tips.
Have a good evening.
https://www.komoot.com/fr-fr/collection/4023980/-lille-cap-nord-1er-mai-au-31-juillet-2026?ref=collection
Hi there,
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure! Thanks in advance.
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure! Thanks in advance.
Hi, has anyone recently bought Primus or Butagaz gas, possibly puncture-style, in Dubrovnik or the surrounding area? Same question for Albania... thanks. aichatou
Hi there,
Coming from Laos (*), I’m planning to enter Thailand by bike via the Fourth Thai–Lao Friendship Bridge.
Before this bridge was built, I’d already cycled the road from Louang Namtha to Houei Sai and crossed the river by boat to reach Thailand.
At the time, the condition of that road was impeccable, and most importantly, traffic was light.
So I’m wondering if anyone who’s taken it recently can tell me whether traffic has increased since the bridge opened.
Thanks in advance!
(*) I’m currently cycling in China (Yunnan)
Coming from Laos (*), I’m planning to enter Thailand by bike via the Fourth Thai–Lao Friendship Bridge.
Before this bridge was built, I’d already cycled the road from Louang Namtha to Houei Sai and crossed the river by boat to reach Thailand.
At the time, the condition of that road was impeccable, and most importantly, traffic was light.
So I’m wondering if anyone who’s taken it recently can tell me whether traffic has increased since the bridge opened.
Thanks in advance!
(*) I’m currently cycling in China (Yunnan)
Hi there,
Just a few words about the loop I did by bike in Yunnan.
Entry and exit
I entered China through the Sino-Vietnamese border crossing at Lào Cai / Hekou under the 30-day visa exemption currently available to French nationals and others.
The process was simple and quick. A Chinese police officer even helped me complete my electronic pre-registration at a computer kiosk. I wasn’t aware this formality was required—it’s similar to Thailand’s TM6.
No issues with the bike.
I left the country via the Sino-Laotian border crossing at Mohan / Boten.
The atmosphere was a bit chaotic there, but again, no problems with the bike.
The timing
I visited Yunnan in February 2026.
Weather-wise, at higher altitudes (between 1,500 and 2,000 meters), it was around ten degrees at night and in the mornings, and around twenty degrees at the hottest part of the day.
I had two days of rain, so I took the bus to keep moving. Otherwise, clear blue skies.
Culturally, Chinese New Year fell on February 17th (and the 15 days following), right in the middle of my trip. Because of this, my take on the traffic might be off.
Accommodation and food I always found a hotel to stay in for prices ranging from 8 to 15 €. Except in Kunming (the capital), where many hotels were fully booked (Chinese New Year). I ended up at a 100 € hotel with great value for money.
A bowl of noodles costs about 1.5 € on average.
Onboard electronics Since my smartphone doesn’t support eSIMs, I subscribed to a China plan with my carrier. Otherwise, for much cheaper, Alipay offers eSIMs for foreigners that allow access to services usually blocked for Chinese users (WhatsApp, Facebook, etc.).
An internet connection is essential for paying with Alipay or WeChat, as this payment method is widespread.
I only managed to use Alipay.
Either way, always carry cash because sometimes there’s no signal, or the merchant only accepts WeChat.
Also, it’s best to bring a power adapter when you arrive rather than struggling to find one.
Traffic and roads The Chinese aren’t reckless drivers. They follow traffic rules and watch out for cyclists. This is slightly less true in Xishuangbanna (the region bordering Myanmar and Laos).
In urban areas, there are almost always wide bike lanes, separated from other roads, where bikes, electric mini-scooters, and scooters share the space pretty harmoniously.
The roads are in great condition, and traffic is generally manageable—even light—except for one stretch (Eshan -> Yangwu).
Most traffic is absorbed by expressways, China’s equivalent of highways: toll roads that are off-limits to slow vehicles.
You’re never far from these expressways; sometimes you even ride alongside them, which can be noisy at times.
The climbs are usually reasonable, around 5% to 6%. From what I remember, the steepest section was between Menglun and Mengla, with gradients of 8% to 10%, sometimes more.
Riding at these altitudes—though modest—took a bit of getting used to.
The route I didn’t plan anything in advance. My only goal was to reach Kunming. I don’t know why, but just hearing the name of that city, like Yunnan, always felt dreamy to me.
Here’s the breakdown: Hekou -> Man Hao (94 km); Man Hao -> Yuanyang (64 km); Yuanyang -> Jianshui (bus); Jianshui -> Tong Hai (78 km); Tong Hai -> Chenjiang (85 km); Chenjiang -> Kunming (60 km); Kunming -> Kunyang (60 km); Kunyang -> Eshan (67 km); Eshan -> Yangwu (58 km); Yangwu -> Yuanjiang (59 km); Yuanjiang -> Pu'er (bus); Pu'er -> Dadugang (75 km); Dadugang -> Jinghong (80 km); Jinghong -> Menglun (67 km); Menglun -> Mengyuancun (51 km); Mengyuancun -> Mengla (43 km); Mengla -> Boten (67 km).
Otherwise, I’m currently in Thailand and just hoping my return flight with Qatar won’t get canceled.
Oh well... 😉
Just a few words about the loop I did by bike in Yunnan.
Entry and exit
I entered China through the Sino-Vietnamese border crossing at Lào Cai / Hekou under the 30-day visa exemption currently available to French nationals and others.
The process was simple and quick. A Chinese police officer even helped me complete my electronic pre-registration at a computer kiosk. I wasn’t aware this formality was required—it’s similar to Thailand’s TM6.
No issues with the bike.
I left the country via the Sino-Laotian border crossing at Mohan / Boten.
The atmosphere was a bit chaotic there, but again, no problems with the bike.
The timing
I visited Yunnan in February 2026.
Weather-wise, at higher altitudes (between 1,500 and 2,000 meters), it was around ten degrees at night and in the mornings, and around twenty degrees at the hottest part of the day.
I had two days of rain, so I took the bus to keep moving. Otherwise, clear blue skies.
Culturally, Chinese New Year fell on February 17th (and the 15 days following), right in the middle of my trip. Because of this, my take on the traffic might be off.
Accommodation and food I always found a hotel to stay in for prices ranging from 8 to 15 €. Except in Kunming (the capital), where many hotels were fully booked (Chinese New Year). I ended up at a 100 € hotel with great value for money.
A bowl of noodles costs about 1.5 € on average.
Onboard electronics Since my smartphone doesn’t support eSIMs, I subscribed to a China plan with my carrier. Otherwise, for much cheaper, Alipay offers eSIMs for foreigners that allow access to services usually blocked for Chinese users (WhatsApp, Facebook, etc.).
An internet connection is essential for paying with Alipay or WeChat, as this payment method is widespread.
I only managed to use Alipay.
Either way, always carry cash because sometimes there’s no signal, or the merchant only accepts WeChat.
Also, it’s best to bring a power adapter when you arrive rather than struggling to find one.
Traffic and roads The Chinese aren’t reckless drivers. They follow traffic rules and watch out for cyclists. This is slightly less true in Xishuangbanna (the region bordering Myanmar and Laos).
In urban areas, there are almost always wide bike lanes, separated from other roads, where bikes, electric mini-scooters, and scooters share the space pretty harmoniously.
The roads are in great condition, and traffic is generally manageable—even light—except for one stretch (Eshan -> Yangwu).
Most traffic is absorbed by expressways, China’s equivalent of highways: toll roads that are off-limits to slow vehicles.
You’re never far from these expressways; sometimes you even ride alongside them, which can be noisy at times.
The climbs are usually reasonable, around 5% to 6%. From what I remember, the steepest section was between Menglun and Mengla, with gradients of 8% to 10%, sometimes more.
Riding at these altitudes—though modest—took a bit of getting used to.
The route I didn’t plan anything in advance. My only goal was to reach Kunming. I don’t know why, but just hearing the name of that city, like Yunnan, always felt dreamy to me.
Here’s the breakdown: Hekou -> Man Hao (94 km); Man Hao -> Yuanyang (64 km); Yuanyang -> Jianshui (bus); Jianshui -> Tong Hai (78 km); Tong Hai -> Chenjiang (85 km); Chenjiang -> Kunming (60 km); Kunming -> Kunyang (60 km); Kunyang -> Eshan (67 km); Eshan -> Yangwu (58 km); Yangwu -> Yuanjiang (59 km); Yuanjiang -> Pu'er (bus); Pu'er -> Dadugang (75 km); Dadugang -> Jinghong (80 km); Jinghong -> Menglun (67 km); Menglun -> Mengyuancun (51 km); Mengyuancun -> Mengla (43 km); Mengla -> Boten (67 km).
Otherwise, I’m currently in Thailand and just hoping my return flight with Qatar won’t get canceled.
Oh well... 😉
Hi! I’m planning to visit the Stockholm Archipelago by bike in early April.
Do you know if the boats will be running between the different islands at that time of year? For those who’ve already been, all your tips and recommendations are welcome—accommodation, etc. Also, do you know where I can rent a bike in Stockholm? Thanks so much in advance for your help!
Hello there, pedal-powered Young Boys!
Claudio (still from Faverges)
dreaming about a cycling getaway in Italy from Faverges (train all the way to Turin)
from Turin down to Venice along the Po River and back via the Padana (Alta Italia da attraversare – Northern Italy to cross)
The tricky part is getting from Chioggia to Venice.
I read it’s possible by hopping on a boat from island to island,
but it sounds a bit stressful.
Has anyone already tackled this route?
Thanks, and cheers to all! http://cbandiera.free.fr/parcours/Padania/
Claudio
Thanks, and cheers to all! http://cbandiera.free.fr/parcours/Padania/
Claudio

Hi there,
I’m currently looking for a bike to do my first bike trip across France, with the ultimate goal of cycling through Latin America. I’ve got a lot of questions and I’d love to hear if you have any answers or advice to share. First off, I’ve been through this before with hiking. I want to get top-quality gear right away. When I started hiking, I ended up buying everything three times—first beginner gear, then intermediate, then expert, etc. For biking, I’d prefer to skip that process and invest right now in a bike that could ideally handle Latin America. I’ve set a total max budget of around 5000 € (roughly 4000–4500 € for the bike and the rest for accessories: panniers, helmet, cycling shorts, etc.).
So, I’ve got quite a few questions:
* I’ve read in several places that some people recommend buying the bike directly in Latin America. Since I need a first bike to train in Europe, would it be better to buy an entry-level bike in France (and sell it before the big departure)? Or is it preferable to start right away with my final bike to get used to it? Is buying it there just to save a bit of money?
* For a long-term trip (around six months) in Latin America, is it better to go for a gravel bike or a mountain bike?
* Should I buy a new bike or a refurbished one? Even more so given that I’m planning a long trip—could a refurbished bike end up causing more breakdowns?
If you have any advice on models, technical features to prioritize, or recommended sellers or resellers, I’d love to hear it. I’m a total beginner—I’ve only just started watching videos and reading up on the subject, and all the technical specs are new to me!
Thanks in advance for your help!
I’m currently looking for a bike to do my first bike trip across France, with the ultimate goal of cycling through Latin America. I’ve got a lot of questions and I’d love to hear if you have any answers or advice to share. First off, I’ve been through this before with hiking. I want to get top-quality gear right away. When I started hiking, I ended up buying everything three times—first beginner gear, then intermediate, then expert, etc. For biking, I’d prefer to skip that process and invest right now in a bike that could ideally handle Latin America. I’ve set a total max budget of around 5000 € (roughly 4000–4500 € for the bike and the rest for accessories: panniers, helmet, cycling shorts, etc.).
So, I’ve got quite a few questions:
* I’ve read in several places that some people recommend buying the bike directly in Latin America. Since I need a first bike to train in Europe, would it be better to buy an entry-level bike in France (and sell it before the big departure)? Or is it preferable to start right away with my final bike to get used to it? Is buying it there just to save a bit of money?
* For a long-term trip (around six months) in Latin America, is it better to go for a gravel bike or a mountain bike?
* Should I buy a new bike or a refurbished one? Even more so given that I’m planning a long trip—could a refurbished bike end up causing more breakdowns?
If you have any advice on models, technical features to prioritize, or recommended sellers or resellers, I’d love to hear it. I’m a total beginner—I’ve only just started watching videos and reading up on the subject, and all the technical specs are new to me!
Thanks in advance for your help!
Calling all travelers.
We’ll be landing at Lyon Airport and want to bike to La Verpillière train station (with panniers and camping gear, etc.) to catch a TER to Voreppe.
What’s the safest route for this bike trip?
Thanks in advance
hi,
I'm planning a recumbent bike trip from the Pyrenees to Greece. On the EuroVelo 8 route, it doesn't specify the path through the Alps.
Are there any experienced cyclists here who can tell me where they go to avoid climbing too high?
Also, is there another traveler/bike forum better suited for broadening the responses?
thanks
