ce post s'adresse aux geeks du vélo mais aussi à ceux qui ont usé leurs pneus en vadrouille aux 4 coins de la planète!
Je cherche une paire de roues pour faire un TDM à vélo l'année prochaine. Comme je pars avec femme et enfants et afin de soulager tout ce petit monde, c'est moi qui ferais la mule! Tente, réchaud, bouffe, réserve d'eau...bref, tout ce qui est lourd et/ou encombrant sera pour ma pomme...Le vélo est un Surly Troll équipé de porte bagage, les pneus sont des Schwalbe Marathon Mondial en 26x2".
J'ai donc vu sur un site allemand des roues Mavic XM 719 disques et V-Brake avec moyeu Shimano XT 36 rayons...
Ch'lut
J'ai les XM 719 sur mon Surly LHT .Elles arrivent a 3000 kms dont 1000 kms
de balade charger "route et chemin"
Je me sert de mon vélo pour presque tout , je monte et descend les trottoirs
bref comme un bon vieux VTT .
Je ne suis pas un pro de la jante mais les miennes n'on pas bouger depuis leur montage
J'ai les mundial en 2 aussi .avec moyen dynamo XT
reve de longues escapades en moto avec ma moitie , mais depuis le vélo est arrivé ...
Je pense que l'on peut privilégier une jante plus "large" (521) qui a le mérite de moins "pincer" le pneumatique de grosse section .... et d'éviter les crevaisons par pincement avec des pneus un peu sous-gonflés ....
quand à la différence de poids (65 g), il faut la relativiser avec le poids (relativement énorme) des pneus.
Bonne préparation
Merci Pascal pour ta réponse.
Les jantes XM 719 sont un modèle haut de gamme d'après le site Mavic. Je pense effectivement qu'elles seront suffisament robustes, et vu ce que tu leurs infliges, ça devrait le faire!
Tu les as commandées sur un site de VPC ou fait monter chez ton bouclard?
Merci Lethieu pour cette info. J'avais déjà entendu cet argument en faveur de la jante plus large pour éviter le pincement du flan du pneu.
En ce qui concerne le poids, ce n'est pas grand chose c'est sûr mais je me dis qu'en évitant de rajouter 100 gr par ci, 100 gr par là, je gagnerai en aisance pour aligner les km...
Ma question est de savoir si il vaut mieux rajouter ces 100 gr pour les roues et être tranquille ou si les XM 719 seront suffisament costauds et assureront le même service pour 100 gr de moins...?
les 65 g. de différence représentent moins de 10 % du poids du pneu ... c'est peu, même au "tour e roue", là où le poids est le plus défavorable pour la "nervosité" de la machine (mais on bénéficie d'une meilleure inertie au bon terrain ) ... et ils sans doute faciles à regagner sur le poids total de la machine ...
Cela dit, les roues VTT sont prévues pour encaisser des chocs importants (perso : 97 kg + la machine : calculer l'énergie encaissée par ma roue quand je saute une marche de 50 bons centimètres !!!) ... Je ne me ferait pas trop de soucis de ce côté là : même chargé et sur pistes, les deux font l'affaire .
Le seul défaut des roues VTT "modernes" , dans des contrées lointaines, c'est qu'elles sont souvent montées "très dures" (rayons tendus à mort) et donc difficiles à réparer ou retendre soi-même en cas d'accident (mais c'est désormais exceptionnel !!)
C'est vrai que comparé au poids du pneu Schwalbe, les 65 gr sont dérisoires...De toute façon, le voyage se voudra lent afin de profiter du paysage...et de ne pas semer la troupe!
Tu me confirmes qu'il vaut mieux un montage en 36 rayons?
Là encore, c'est très relatif ... comme mon argument en faveur de jantes "larges" (dans la mesure où un pneu de 2 pouces est bien en deçà des "normes constructeurs"). Les roues modernes type VTT sont conçues pour des contraintes qui excèdent beaucoup celles d'une voyage même chargé et sur pistes. Les deux jantes conviennent donc.
Evidemment, en théorie, une jante en 36 trous "soutient" mieux la roue qu'une jante en 32 trous ... Mais là aussi, même si ma préférence va encore au rayonnage classique en 36 trous, ce n'est pas très significatif.
En revanche, une roue ça s'entretient ... et, en route, les problèmes peuvent venir du desserrement d'un ou plusieurs rayons .... il faut donc vérifier périodiquement la tension des rayons : alignement parfait de la roue (voile et saut) : c'est le meilleur moyen de faire durer une jante (nb : un vieux truc des "grands" voyageurs : coller au départ les écrous de rayons avec une petite goutte de colle cyanhydrique pour éviter que l'écrou ne se desserre et que le rayon ne se détende ... ça vaut ce que ça vaut, mais ça peut aider ..)
Bonjour,
Globalement d'accord avec ce qui vient d'être dit, je voudrais juste rajouter que la solidité d'une jante ne peut s'exprimer que si elle est associée à de bons rayons. Or c'est souvent sur le rayonnage que sont faites les économies.
De bons rayons et un bon rayonnage fait par un bon rayonneur...car même avec les meilleurs rayons, je ne suis pas sûr de monter une bonne roue!🙂
Les rayons sont des DT champion en 2 mm.
Lethieu, je retiens la technique du point de colle, ça ne coûte rien d'essayer!
Je vais patienter quelques jours car le site allemand doit recevoir les jantes Mavic XM 719 en 36 trous en début de semaine. D'après mon vélociste, Mavic se recentrerait sur les roues complètes et délaisserait les pièces détachées. l'attente de plus d'un mois pour avoir ces roues...
Claudio de la Faverges.
Bonjour amis cyclotouristes, claude passionné de voyages à vélo favergien et défenseur du cycliste.
plus la carte bleue est foncée et plus le bagage est léger
en anglais "the more the card is blu the less the luggage is heavy"
Moi aussi, j'utilise des Rigida ZAC 2000 depuis une petite dizaine d'années, les mêmes que celles qui équipent les vélos des facteurs. Pas le moindre petit voile ou faux rond.
OK, je vais fouiner sur la toile pour trouver des infos sur ces jantes, enfin sur le modèle actuel!
Peux-tu m'indiquer combien elles ont de rayons? Le poids des jantes?
Merci d'avance.😉
unune jante corec cest 50 euros environ le montage 50-60 euros
les rayons 40 euros
pneu40 euros
ch a air 5 euros
ensuite ya le moyeu
faut savoir si on veut de la qualité on de la daube
a l avant on peut se contenter d'une roue bas de gamme a 50 euros ya moins d'importance
ts dépend de l'usage
cb
Claudio de la Faverges.
Bonjour amis cyclotouristes, claude passionné de voyages à vélo favergien et défenseur du cycliste.
plus la carte bleue est foncée et plus le bagage est léger
en anglais "the more the card is blu the less the luggage is heavy"
Claudio de la Faverges.
Bonjour amis cyclotouristes, claude passionné de voyages à vélo favergien et défenseur du cycliste.
plus la carte bleue est foncée et plus le bagage est léger
en anglais "the more the card is blu the less the luggage is heavy"
Claudio de la Faverges.
Bonjour amis cyclotouristes, claude passionné de voyages à vélo favergien et défenseur du cycliste.
plus la carte bleue est foncée et plus le bagage est léger
en anglais "the more the card is blu the less the luggage is heavy"
Claudio de la Faverges.
Bonjour amis cyclotouristes, claude passionné de voyages à vélo favergien et défenseur du cycliste.
plus la carte bleue est foncée et plus le bagage est léger
en anglais "the more the card is blu the less the luggage is heavy"
Claudio, je n'arrive pas à ouvrir tes liens...Effectivement, il vaut mieux avoir une bonne roue arrière si on n'a qu'un porte-bagage arrière...
Le tarif que j'ai indiqué n'inclut pas le pneu ni la chambre à air. A 180€, j'ai trouvé une paire de roues avec jantes Mavic XM 719 disque et V-Brake en 36 rayons, un moyeu XT et des rayons DT Champion. Il ne reste qu'à attendre l'approvisionnement...
J'ai pris la jante xm179 l'année dernière j'en suis très satisfait.
Seulement le montage compte autant que la qualité des composants surtout pour les roues.
Je ne saurais trop conseiller pour un TDM d'aller chez un ptit vélociste artisan du coin de la rue, les roues montées à la main sont toujours mieux montées que les roues usine même si y a une vérif manuelle en usine.
Par exemple, pour cette roue arrière, j'ai probablement payé plus cher de 20% par rapport à un site comme rosebike, seulement je suis retourné 2 fois pour que le vélociste vérifie le rayonnage et corrige la tension, car la tension d'une roue doit toujours être corrigée et vérifiée au bout d'un peu de roulage.
Entièrement d'accord avec toi concernant le rayonnage et l'importance de la qualité, mais...il y a un mais...bien que je sois complètement POUR le travail des artisans de proximité, la différence dans mon cas de figure est de 110€ pour les mêmes composants.
180€ chez Rose, 290€ chez mon bouclard...la différence est trop grande!
donc si ya des contributeurs on se donne rdv ds deux ans pour analyser avec des chiffres
claudio
Claudio de la Faverges.
Bonjour amis cyclotouristes, claude passionné de voyages à vélo favergien et défenseur du cycliste.
plus la carte bleue est foncée et plus le bagage est léger
en anglais "the more the card is blu the less the luggage is heavy"
La comparaison pourrait être intéressante mais il y a beaucoup trop de paramètres qui rentrent en jeu...la charge du bonhomme + des bagages s'il y a, la taille et la pression des pneus, l'état des routes et chemins empruntés, le pilotage du piloteur (^^), ce que tu fais de ton vélo (vélotaf, vélorando, vélenduro...)
on sinterroge alors sur la véracité des études diverses qui fleurissent sur les médias notamment en pseudo médecine
fermons le banc
Claudio de la Faverges.
Bonjour amis cyclotouristes, claude passionné de voyages à vélo favergien et défenseur du cycliste.
plus la carte bleue est foncée et plus le bagage est léger
en anglais "the more the card is blu the less the luggage is heavy"
Rosebike n'ayant toujours pas reçu les jantes Mavic XM 719 en 36 rayons, contrairement à ce qu'ils avaient laissé entendre, j'ai plusieurs solutions...
Soit je prends leurs roues EX 721 avec moyeu XT en 36 rayons, mais j'ai peur que ça soit trop lourd et trop "gros" pour ce que je veux en faire, soit je fais un montage à la carte chez eux en 32 rayons avec des XM 719...
Soit je fais un montage à la carte en 36 rayons moyeu XT et jante XM 719 chez CRC pour la roue arrière, à 150€ + la roue XM 319 avec moyeu XT en 36 rayons chez XXcycle à 80€.
C'est un peu plus que prévu mais du coup j'ai une roue arrière très solide et une avant qui devrait aussi tenir le coup! Je vais m'orienter vers la 2è solution...
Merci à tous pour vos conseils et infos!
Rosebike n'ayant toujours pas reçu les jantes Mavic XM 719 en 36 rayons, contrairement à ce qu'ils avaient laissé entendre, j'ai plusieurs solutions...
Soit je prends leurs roues EX 721 avec moyeu XT en 36 rayons, mais j'ai peur que ça soit trop lourd et trop "gros" pour ce que je veux en faire, soit je fais un montage à la carte chez eux en 32 rayons avec des XM 719...
Soit je fais un montage à la carte en 36 rayons moyeu XT et jante XM 719 chez CRC pour la roue arrière, à 150€ + la roue XM 319 avec moyeu XT en 36 rayons chez XXcycle à 80€.
C'est un peu plus que prévu mais du coup j'ai une roue arrière très solide et une avant qui devrait aussi tenir le coup! Je vais m'orienter vers la 2è solution...
Maintenant que tu en parles, ce fut une vraie galère pour que le velociste reçoive la jante xm719.
Je m'y etais pris suffisamment tot, heureusement, mais je crois que cela a pris un mois !
Pour la gamme 319, tu perds quand même en qualité d'après ce que les pros en disent., il vaut mieux clairement une jante 719 *32 qu'une jante en 319*36.
Comment ça se fait que tu trouves pas un velociste qui te monte ça pour 150 euros ? Je me souviens pas trop du prix, mais je pense pas avoir payer + de 150. Encore une fois, vaut mieux une roue montée main avec un moyeu moins cher, qu'une roue montée usine avec un moyeu + haut de gamme.
Bonne chance à toi.
J'ai pris en compte ton conseil Boqi concernant la jante XM 319...Du coup, j'ai eu de la chance car Rosebike vient juste de remettre les roues XM 719 en ligne!
Et hop! une paire de roues XM 719 avec moyeu XT en 36 trous et rayons DT Swiss champion dans le panier!
J'ai tous les composants...reste plus qu'à monter tout ça!
Déterrage de post !!
Petit retour sur les jantes XM 719 36 rayons moyeu XT
Ce matin j'ai constaté des petites fentes autour des rayons (sur une dizaine d'entre eux ) Donc jante morte je suppose (?) Méme pas 10 000kms ...9 544 exactement .
reve de longues escapades en moto avec ma moitie , mais depuis le vélo est arrivé ...
Bonjour Pascal.
J ai eu ça sur mon vélo de course et j ai changé mes jantes.
Mais sur mon vélo de voyage, si cela m arrive idem....
Surtout chargé par pistes et chemins caillouteux il faut du sérieux et costaud.
Mais moins de 10 000....C est peu pour être usées.
Bonjour Pascal
Pour des jantes vraiment solides , il faut se tourner vers des jantes de DIRT ou BMX (saut à vélo !).
Rigida propose plusieurs modèles notamment les "SPUTNIK" ou aussi les "ANDRA".
Il y a aussi les Jantes Sun Ringle Rhyno Lite XL mais elles sont très difficiles à trouver.
André
Bonjour André
J'ai commencé a regarder les jantes en 26 pouces .J'hésite a rester en 559/19 c ou bien passé en 559 /21 plus large .
J'ai bien vu les rhyno , mais trop large (je roule en pneus 32 mm ) Panaracer Ribmo .J'ai vu les "Ryde" Andra 10 ou les Zac 21 , Zac 19 aussi .
J'ai trouvé un artisan rayonneur dans le Tarn , j'attend son devis .Je ne souhaite changer que le cercle et conserver le reste "rayons et moyeu XT"
En attendant pas de vélo 😊
L'Artisan et son site web ...vdzwheels.com/produit/roues-vtt/
Les sputnik c'est du bon ou pas !! https://fr.hollandbikeshop.com/roues/jantes-de-velo/jantes-26-pouces-pour-vtc/ryde-jante-sputnik-26-x-1-75-36-trou-noir/
reve de longues escapades en moto avec ma moitie , mais depuis le vélo est arrivé ...
Salut Pascal
Je peux donner mon avis sur les RIGIDA SPUTNIK (doubles oeillets) que je possède depuis 10000 km.
j'ai fait le montage des roues moi-même (doc trouvée sur internet "magnon.net").
Elles n'ont pas pris de voile depuis le début et elles sont restées nickel.
Et pourtant je roule assez chargé !
André
Tu fait bien de préciser 😛
Les SPutnik on bonne presse , mais le poids !! 670 grammes le cercle ...En même temps , j'naï pas envie de revivre la méme histoire dans 2000 kms ou autre 😊
Si un lecteur utilise d'autre model de jante , je suis preneur de toute bonne info .
J'ai vu les DT Swiss 535 a pas chère (spécial VAE) + solide selon eux , des Alexrim aussi , bref le choix ne manque pas .
Les sputnik ont ma préférence pour l'instant 😉
reve de longues escapades en moto avec ma moitie , mais depuis le vélo est arrivé ...
Bonjour, je vais faire la traversée du canada en vélo, et j'ai une question qui peut paraitre bête, mais quelqu'un pourrait me dire comment il faut emballer un vélo (dans un carton, avec une mention fragile... je sais pas) pour prendre l'avion. Merci d'avance
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam.
My question is about getting back to Nantes.
Do any of you know what the best return option might be? I’d love to hear about your experiences.
I saw that FlixBus doesn’t take bikes.
By train, I think it’s possible but would involve multiple local trains.
We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance!
Have a great evening
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires.
I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time).
I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral.
I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough?
And one last question: white gas stove or can I get by with my gas stove?
I’ve gotten used to crossing Europe by bus to return by bike.
It was really convenient to take the bike without having to disassemble it.
But FlixBus no longer accepts bikes...
What alternatives do you know about?
Thanks.
Hi there,
I’m planning to ride the Dutch section of the EuroVelo 19, from Maastricht to Rotterdam.
Since it’s too complicated to bring my bike on the train, I’m looking to rent one locally.
I’d love any tips or bike rental shop recommendations—I’m struggling to find options even in Rotterdam.
The plan is to rent in Rotterdam, take the train to Maastricht with the bike, then cycle back to Rotterdam.
Thanks in advance for any advice or suggestions!
Nath
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August!
Virginie
Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
I’m planning to build a new touring bike.
I want to prioritize lightness.
That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads.
The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper.
I’m particularly considering the RockShox Rudy Ultimate XPLR fork.
Unlike MTB forks, its travel is short: either 30 mm or 40 mm.
It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring.
And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear.
More generally, how reliable are these kinds of forks?
Hi everyone,
I wanted to share with you the incredible feat my friend José, who’s 72 years old, is currently undertaking. He left Auterive near Toulouse on Monday, May 18, 2026, on his non-electric bike, heading for the North Cape in Norway!
You can follow his route on the link below—he’s currently in Sweden:
https://thierry-thomas.travelmap.net/jose-de-toulouse-a-nord-cap-2026
You can zoom in on the map and click on each stopover town to see the photos
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.
It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.
One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.
We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.
Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
Hi there, we’re a group of 4 cyclists looking to get from Treviso in Italy to Munich with our 4 non-folding bikes. It seems complicated! Are there any solutions? Thanks so much.
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed
story being posted online soon
1100 km in 11 days
beautiful and varied regions
Hi there, we’re planning a Munich to Venice bike trip at the end of June 2026. Getting back from Venice to Toulouse by train with 4 bikes isn’t straightforward. What return options have others who’ve done this trip chosen? Any tips or great deals would be much appreciated. Thanks a bunch! !
Hi everyone,
Happy owner of a Pegasus Estremo bike with a Rohloff hub, which is giving me trouble with the SF11-NCX-FT-E-LITE 700C TS 300/0 fork (serial number TD01329060). It’s starting to show its age, and I’d like to repair it to extend the life of my beloved bike.
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Hi, I'd like to know if anyone has done this route recently or has reliable info.
Does the track exist, and most importantly, is there sand (for biking)?
Any info is welcome.
Cheers,
diego ambilobe: mangaoka, manondro, ramena
vohemar sambava: masondrono, tanambao
Hi there,
New to bike touring,
I’d love to start with a section of the Via Rhona to explore and share (route to be decided).
Looking forward to exchanging tips!
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
A big thank you to Lazarou for all the info you share in this forum!
I'm passionate about Morocco, which I cycled through back in 2009.
Last year, my wife and I explored the High Atlas by tandem. Completely smitten, we're heading back in April (Anti Atlas) and May (High and Middle Atlas), still on our tandem.
Do you have any info on the track between Amezri and Ali Ait Nito? Are the river crossings in the Tessaout still there? It's not easy to navigate with a loaded tandem... especially if the river level is high due to this year's heavy snowmelt!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
Claudio specializes in the route of the Savoie lakes
Here are his travels
Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné
Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way
Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place
Rural and quite peaceful
A road cycling route created by Serge B...
First of all... happy New Year! Wishing you great roads in 2017!
I’ve been traveling for a few years now with a high-quality mountain bike, but it’s equipped with hydraulic disc brakes. I live (pedal) with the constant worry of a breakdown (leak, air bubble, heat causing the fluid to...). My bike mechanic tells me it’s impossible to switch them out for V-brakes.
What do you all think? Am I taking a big risk continuing (alone) with these brakes? Thanks in advance for your great tips!
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025.
It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border.
We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
Hi there,
I’m planning the route to cycle from Lille to Nordkapp with my partner.
Duration: 3 months, from May 1st to July 31st, 2026.
In the attached details below, I need to add some "non-riding" days (rest days, basically).
So I’m looking to "shorten" the trip by taking ferries or trains for some stretches. Which areas could I skip?
Thanks in advance for your great tips.
Have a good evening.
https://www.komoot.com/fr-fr/collection/4023980/-lille-cap-nord-1er-mai-au-31-juillet-2026?ref=collection
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure!
Thanks in advance.
Hi, has anyone recently bought Primus or Butagaz gas, possibly puncture-style, in Dubrovnik or the surrounding area? Same question for Albania... thanks. aichatou
Just a few words about the loop I did by bike in Yunnan.
Entry and exit
I entered China through the Sino-Vietnamese border crossing at Lào Cai / Hekou under the 30-day visa exemption currently available to French nationals and others.
The process was simple and quick. A Chinese police officer even helped me complete my electronic pre-registration at a computer kiosk. I wasn’t aware this formality was required—it’s similar to Thailand’s TM6.
No issues with the bike.
I left the country via the Sino-Laotian border crossing at Mohan / Boten.
The atmosphere was a bit chaotic there, but again, no problems with the bike.
The timing
I visited Yunnan in February 2026.
Weather-wise, at higher altitudes (between 1,500 and 2,000 meters), it was around ten degrees at night and in the mornings, and around twenty degrees at the hottest part of the day.
I had two days of rain, so I took the bus to keep moving. Otherwise, clear blue skies.
Culturally, Chinese New Year fell on February 17th (and the 15 days following), right in the middle of my trip. Because of this, my take on the traffic might be off.
Accommodation and food
I always found a hotel to stay in for prices ranging from 8 to 15 €. Except in Kunming (the capital), where many hotels were fully booked (Chinese New Year). I ended up at a 100 € hotel with great value for money.
A bowl of noodles costs about 1.5 € on average.
Onboard electronics
Since my smartphone doesn’t support eSIMs, I subscribed to a China plan with my carrier. Otherwise, for much cheaper, Alipay offers eSIMs for foreigners that allow access to services usually blocked for Chinese users (WhatsApp, Facebook, etc.).
An internet connection is essential for paying with Alipay or WeChat, as this payment method is widespread.
I only managed to use Alipay.
Either way, always carry cash because sometimes there’s no signal, or the merchant only accepts WeChat.
Also, it’s best to bring a power adapter when you arrive rather than struggling to find one.
Traffic and roads
The Chinese aren’t reckless drivers. They follow traffic rules and watch out for cyclists. This is slightly less true in Xishuangbanna (the region bordering Myanmar and Laos).
In urban areas, there are almost always wide bike lanes, separated from other roads, where bikes, electric mini-scooters, and scooters share the space pretty harmoniously.
The roads are in great condition, and traffic is generally manageable—even light—except for one stretch (Eshan -> Yangwu).
Most traffic is absorbed by expressways, China’s equivalent of highways: toll roads that are off-limits to slow vehicles.
You’re never far from these expressways; sometimes you even ride alongside them, which can be noisy at times.
The climbs are usually reasonable, around 5% to 6%. From what I remember, the steepest section was between Menglun and Mengla, with gradients of 8% to 10%, sometimes more.
Riding at these altitudes—though modest—took a bit of getting used to.
The route
I didn’t plan anything in advance. My only goal was to reach Kunming. I don’t know why, but just hearing the name of that city, like Yunnan, always felt dreamy to me.
Hi! I’m planning to visit the Stockholm Archipelago by bike in early April.
Do you know if the boats will be running between the different islands at that time of year? For those who’ve already been, all your tips and recommendations are welcome—accommodation, etc. Also, do you know where I can rent a bike in Stockholm? Thanks so much in advance for your help!
Hello there, pedal-powered Young Boys!
Claudio (still from Faverges)
dreaming about a cycling getaway in Italy from Faverges (train all the way to Turin)
from Turin down to Venice along the Po River and back via the Padana (Alta Italia da attraversare – Northern Italy to cross)
The tricky part is getting from Chioggia to Venice.
I read it’s possible by hopping on a boat from island to island,
but it sounds a bit stressful.
Has anyone already tackled this route?