Réparer son vélo: quels outils emportez-vous?
by Oli1190
This discussion is in French, the community’s main language.
Original post
Bonjour,
Je pars au Burkina pour un mois avec un vélo et suis en train de préparer mon matos de réparation. Vu le problème du poids, j'aimerais savoir avec quels outils d'autres sont partis?
Merci
Salut
Un outils avec un dérive chaine me parait indispensable en Afrique. Si tu casse ta chaine, il vont te la remettre au marteau et au burin. Avec ça:un bout de chaine (5 ou 6 maillons) identique à ta chaine en place.Des têtons de raccord si c'est une shimano.Un ou deux écrous de pédalier.Une vis centrale de pédalier.Des écrous de rayon (Nippes) ainsi que quelques rayons de réserve.De quoi réparer une crevaison.Une chambre à air.1 cable de vitesse.Démonte pneus.Patins de freins en fonction de la durée de ton voyage et du dénivelé.Une pompe1 clé à rayon.
Sur le tandem, on se promène avec en plus:Un jeu de roulements de direction (Can Creek)Une roue libre de réserve (DT)Un pneu pliable et leger de secours.
Tout ça ne pèse rien et ne prend pas de place (a part le pneu), mais peut te rendre un grand service si tu casses ou perd une de ces pièces.
Serge
Un outils avec un dérive chaine me parait indispensable en Afrique. Si tu casse ta chaine, il vont te la remettre au marteau et au burin. Avec ça:un bout de chaine (5 ou 6 maillons) identique à ta chaine en place.Des têtons de raccord si c'est une shimano.Un ou deux écrous de pédalier.Une vis centrale de pédalier.Des écrous de rayon (Nippes) ainsi que quelques rayons de réserve.De quoi réparer une crevaison.Une chambre à air.1 cable de vitesse.Démonte pneus.Patins de freins en fonction de la durée de ton voyage et du dénivelé.Une pompe1 clé à rayon.
Sur le tandem, on se promène avec en plus:Un jeu de roulements de direction (Can Creek)Une roue libre de réserve (DT)Un pneu pliable et leger de secours.
Tout ça ne pèse rien et ne prend pas de place (a part le pneu), mais peut te rendre un grand service si tu casses ou perd une de ces pièces.
Serge
sur 1 mois, si ton vélo est en bon état (le plus important!), il ne peut pas t'arriver grand chose a mon avis.
ce qu'il peut arriver: crevaisons multiples, valve de chambre a air arrachée rayons cassés, chaîne cassée, roue libre cassée, vis cheminées de plateau perdues, cable de frein ou derailleur cassé, roue voilée, patin perdu (si à cartouche) vis de serrage de selle cassée,
voilà, on a a peu prés fait le tour des ennuis possibles! donc la liste de Serge me semble trés bien!
ce qu'il peut arriver: crevaisons multiples, valve de chambre a air arrachée rayons cassés, chaîne cassée, roue libre cassée, vis cheminées de plateau perdues, cable de frein ou derailleur cassé, roue voilée, patin perdu (si à cartouche) vis de serrage de selle cassée,
voilà, on a a peu prés fait le tour des ennuis possibles! donc la liste de Serge me semble trés bien!
Salut,
Moi j'emporte en plus : un petit chiffon pour m'essuyer les mains un morceau de scotch epais un pneu de rechange des vis / ecrous de rechange une petite bombe d'huile, car faire avancer un velo dont la chaine est a moitie grippee, il n'y a rien de pire ! une jeu de cles 6 pans un petit tournevis cruciforme (ces deux derniers vont souvent ensemble sur les "couteaux suisses pour cyclistes" un cable de frein un fouet + un demonte roue libre pour sortir la k7 en cas de casse de rayon (si quelqu'un sait comment se passer de ces 2 outils bien encombrants et lourds, je suis preneur !)
Si j'ai pu etre utile ...
A+
Moi j'emporte en plus : un petit chiffon pour m'essuyer les mains un morceau de scotch epais un pneu de rechange des vis / ecrous de rechange une petite bombe d'huile, car faire avancer un velo dont la chaine est a moitie grippee, il n'y a rien de pire ! une jeu de cles 6 pans un petit tournevis cruciforme (ces deux derniers vont souvent ensemble sur les "couteaux suisses pour cyclistes" un cable de frein un fouet + un demonte roue libre pour sortir la k7 en cas de casse de rayon (si quelqu'un sait comment se passer de ces 2 outils bien encombrants et lourds, je suis preneur !)
Si j'ai pu etre utile ...
A+
La vie est plus belle à Vélo
L'outil le plus important: un vélo en bon état qui ne va pas jouer des tours pendant les 3 mois à venir. Se méfier des fissures sur la roue arrière et effectuer une inspection minutieuse de ce côté avant de partir.
Outillage: Un outil multiple avec démonte-chaîne et clés 6 pans Matériel pour réparer des crevaisons. Chambre à air Patins de frein Huile Pompe Toile isolante Démonte pneu Rayon de dépannage en câble, peut être monté sans démonter la cassette. Clé pour pédales (pour le voyage en avion) Ca suffit, c'est déjà assez lourd!
Outillage: Un outil multiple avec démonte-chaîne et clés 6 pans Matériel pour réparer des crevaisons. Chambre à air Patins de frein Huile Pompe Toile isolante Démonte pneu Rayon de dépannage en câble, peut être monté sans démonter la cassette. Clé pour pédales (pour le voyage en avion) Ca suffit, c'est déjà assez lourd!
Comme les zôtres mais pas le truc à tous faire
+ un bout de pneu (15cm) (usé mais on peut le couper dans un neuf😛) pour faire un éventuel emplâtre, un bout de fil électrique rigide qui fait emploi de bout de fil de fer. Pas le fouet, trop lourd, il "parait" que ca peut le faire avec la chaîne du vélo ?? 4 clés alêne petite pour les gachettes, 2 moyennes (4&5 ???je ne les ai pas sous les yeux) et une grosse pour les manivelles . Une clé plate fine pour les pédales
Un petit tube de graisse (pour l'axe des roues)
Problème mal résolu .... une pince qui fasse aussi coupante de câble sans être trop lourde (elle l'est)
2, 3 Boulons/écrous de la taille courantes (du 6mm??)
Hésitation ....arrache manivelle ????
Petite boite pellicule photo pleine de poudre de lessive (idée trouvée dans un vieux post de VF)
Luc
+ un bout de pneu (15cm) (usé mais on peut le couper dans un neuf😛) pour faire un éventuel emplâtre, un bout de fil électrique rigide qui fait emploi de bout de fil de fer. Pas le fouet, trop lourd, il "parait" que ca peut le faire avec la chaîne du vélo ?? 4 clés alêne petite pour les gachettes, 2 moyennes (4&5 ???je ne les ai pas sous les yeux) et une grosse pour les manivelles . Une clé plate fine pour les pédales
Un petit tube de graisse (pour l'axe des roues)
Problème mal résolu .... une pince qui fasse aussi coupante de câble sans être trop lourde (elle l'est)
2, 3 Boulons/écrous de la taille courantes (du 6mm??)
Hésitation ....arrache manivelle ????
Petite boite pellicule photo pleine de poudre de lessive (idée trouvée dans un vieux post de VF)
Luc
- un fouet + un demonte roue libre pour sortir la k7 en cas de casse de rayon (si quelqu'un sait comment se passer de ces 2 outils bien encombrants et lourds, je suis preneur !)
J'ai un "démonte cassette" tout petit, je ne sais plus le nom exact, ni la marque, ni où j'ai acheté. Si tu ne trouves pas, j'essaierai de mettre une photo C'est une sorte de clé, avec l'empreinte de l'écrou de la cassette et un manche incurvé de 8-10 cm. On monte la roue avec la clé en place sur le vélo et en le faisant rouler (en arrière ?) le manche se bloque contre le cadre et débloque l'écrou.
J'ai un "démonte cassette" tout petit, je ne sais plus le nom exact, ni la marque, ni où j'ai acheté. Si tu ne trouves pas, j'essaierai de mettre une photo C'est une sorte de clé, avec l'empreinte de l'écrou de la cassette et un manche incurvé de 8-10 cm. On monte la roue avec la clé en place sur le vélo et en le faisant rouler (en arrière ?) le manche se bloque contre le cadre et débloque l'écrou.
Quelques photos : http://obiou.fr/
J'ai un "démonte cassette" tout petit, je ne sais plus le nom exact, ni la marque, ni où j'ai acheté. Si tu ne trouves pas, j'essaierai de mettre une photo C'est une sorte de clé, avec l'empreinte de l'écrou de la cassette et un manche incurvé de 8-10 cm. On monte la roue avec la clé en place sur le vélo et en le faisant rouler (en arrière ?) le manche se bloque contre le cadre et débloque l'écrou.
Ca m'intéresse! J'avais deja vu ce genre d'outil sur le foum il y a qq moi. Est ce que tu pourrais retrouver le nom stp ou m'envoyer une photo ?
Merci!
Ca m'intéresse! J'avais deja vu ce genre d'outil sur le foum il y a qq moi. Est ce que tu pourrais retrouver le nom stp ou m'envoyer une photo ?
Merci!
Salut,
J'ai deja entendu parler de rayon souple de depannage, mais je n'ai jamais vu ca nulle part. Ou te les procures-tu ?
Merci
J'ai deja entendu parler de rayon souple de depannage, mais je n'ai jamais vu ca nulle part. Ou te les procures-tu ?
Merci
La vie est plus belle à Vélo
Oui, je vois de quoi il s'agit, j'ai vu ca quelque part sur un site internet etranger.
Je serais super preneur si je savais ou acheter cette merveille !!
La vie est plus belle à Vélo
Salut,
Notre ami Vincent alias "Orangevince" avait bidouillé un "démonte-cassette" afin de se passer du fouet à chaine. Il faut lui demander 🙂
Sinon, voici ce que j'emmène: Dérive chaine+maillons rapides. 1 câble de freins+ 1 câble de dérailleur. Des barettes de freins. 2 clés à moyeux. Un peu de graisse au téflon+1 petit spray d'huile au téflon. 1 tournevis double face aimanté (pour dégager facilement les billes des cuvettes du moyeux). 1 fouêt à chaine+démonte cassette. Des clefs BTR. 1 petite clef anglaise. Vis de rechanges pour le porte bagage+clé plate. 1 chiffon. 4 démonte pneux en plastique, des rustines, une chambre à air, un peu de toile émery. Une petite pompe à vélo de bonne qualitée (la Clever 300 de Décath est très bien). un cerveau.
Pas d'arrache manivelle, car il est possible de rouler avec le roulement du boitier de pédalier mort (ça m'est déjà arrivé).
On ne désire pas ce qu'on ne connaît pas.
On écrit pour raconter, non pour prouver.
http://velo-thailand.over-blog.com/
http://velo-thailand.over-blog.com/
J'emporte au fur et à mesure des années de plus en plus d'outils et de pièces de rechange. Pourquoi ? Parce que le matériel s'allège et perd très souvent en qualité et solidité. Je pense aux roues libres d'antan qui duraient vraiment longtemps. Aujourd'hui, je suis dans l'obligation de m'alourdir d'une roue libre de rechange...
Le matériel s'allège certes, mais le poids des outils et des pièces de rechange s'alourdissent beaucoup plus... Au final, on est loin d'être gagnant au niveau poids sur le vélo et surtout sur l'affreuse balance des compagnies aériennes. Qu'en pensez-vous ?
C'est des Simson que j'ai acheté il y a 6 ans. Simson est un fabricant hollandais de rustines et autres aides de réparation pour le vélo mais je ne sais pas si la société existe encore. Ils faisaient les meilleures rustines que je connaisse.
Christian
Christian
J'ai un "démonte cassette" tout petit, je ne sais plus le nom exact, ni la marque, ni où j'ai acheté. Si tu ne trouves pas, j'essaierai de mettre une photo C'est une sorte de clé, avec l'empreinte de l'écrou de la cassette et un manche incurvé de 8-10 cm. On monte la roue avec la clé en place sur le vélo et en le faisant rouler (en arrière ?) le manche se bloque contre le cadre et débloque l'écrou.
Ca m'intéresse! J'avais deja vu ce genre d'outil sur le foum il y a qq moi. Est ce que tu pourrais retrouver le nom stp ou m'envoyer une photo ?
Merci!
J'ai retrouvé le bidule, y'a écrit dessus : Hyper Cracker - Pamir Engineering - Made in USA (même pas fait en Chine) et ça fait aussi clé à rayons Malheureusement, d'après le site http://www.mark-ju.net/bike_ride/equipment/hypercracker.htm il semble que ça ait disparu, mais ils expliquent comment en fabriquer un et donnent même un lien vers une alternative commerciale : http://www.jastein.com/Tools_for_Wheels.htm Des trucs via Google aussi, en particulier : http://www.sheldonbrown.com/harris/stein-mini-lock/index.html
Ca m'intéresse! J'avais deja vu ce genre d'outil sur le foum il y a qq moi. Est ce que tu pourrais retrouver le nom stp ou m'envoyer une photo ?
Merci!
J'ai retrouvé le bidule, y'a écrit dessus : Hyper Cracker - Pamir Engineering - Made in USA (même pas fait en Chine) et ça fait aussi clé à rayons Malheureusement, d'après le site http://www.mark-ju.net/bike_ride/equipment/hypercracker.htm il semble que ça ait disparu, mais ils expliquent comment en fabriquer un et donnent même un lien vers une alternative commerciale : http://www.jastein.com/Tools_for_Wheels.htm Des trucs via Google aussi, en particulier : http://www.sheldonbrown.com/harris/stein-mini-lock/index.html
Quelques photos : http://obiou.fr/
J'ai retrouvé le bidule, y'a écrit dessus : Hyper Cracker - Pamir Engineering - Made in USA (même pas fait en Chine) et ça fait aussi clé à rayons
Malheureusement, d'après le site http://www.mark-ju.net/...ent/hypercracker.htm il semble que ça ait disparu, mais ils expliquent comment en fabriquer un et donnent même un lien vers une alternative commerciale : http://www.jastein.com/Tools_for_Wheels.htm
Des trucs via Google aussi, en particulier : http://www.sheldonbrown.com/...mini-lock/index.html
Merci !!
Merci !!
+ un bout de pneu (15cm) (usé mais on peut le couper dans un neuf😛)
J'en ai toujours dans mes sacoches de vélo, même pour des petites sorties locales : un passage sur un caillou bien affuté et le pneu y passe. Et quand on se trouve à 40 ou 50 km de chez soi, on peut rentrer sans problème, et ça évite de devoir se trimbaler avec un pneu de rechange.
J'en ai toujours dans mes sacoches de vélo, même pour des petites sorties locales : un passage sur un caillou bien affuté et le pneu y passe. Et quand on se trouve à 40 ou 50 km de chez soi, on peut rentrer sans problème, et ça évite de devoir se trimbaler avec un pneu de rechange.
Leonick
camera embarquée sur l'ironman de Lanzarote, récits de voyages en vélo, Agenda des épreuves d'endurance
camera embarquée sur l'ironman de Lanzarote, récits de voyages en vélo, Agenda des épreuves d'endurance
Log in first, then come back to this page.
You might also like
Densha Otaku - Lesser-Known Regions
Two weeks under the Puglia sun
Return to Swedish Lapland: Trek on the Kungsleden and Crossing the Sarek
Off on a winter adventure in the American West!
3 weeks in Laos, stress-free
Draw Me Your Japan...
South Africa in safari mode: February/March 2026
Back in Tunisia (live account)
More discussions
Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
I'm developing a free and open-source web app for planning walking and cycling trips (and even car trips). You can create a route by clicking directly on the map to add waypoints, and it can consist of multiple stages. The app provides tools to edit the stages and the overall route, and to display useful information (distances, altitudes, and elevation changes). A relief profile can be shown as a graph for a specific stage or the entire route.
Once the route is ready, it can be exported as a GPX file, which can then be used with a GPS or a mobile navigation app.
The app is built in JavaScript and runs entirely in the web browser. It uses the Leaflet library and several OpenStreetMap-based services. Initially developed for my personal needs (I enjoy hiking and cycle touring), I’d be happy to share it with anyone who might find it useful. It’s free to use, doesn’t require an account, and the source code is available.
Source code: https://github.com/patricklmarie/GPX-Route-Planner Online demo: https://patricklmarie.github.io/GPX-Route-Planner/
Once the route is ready, it can be exported as a GPX file, which can then be used with a GPS or a mobile navigation app.
The app is built in JavaScript and runs entirely in the web browser. It uses the Leaflet library and several OpenStreetMap-based services. Initially developed for my personal needs (I enjoy hiking and cycle touring), I’d be happy to share it with anyone who might find it useful. It’s free to use, doesn’t require an account, and the source code is available.
Source code: https://github.com/patricklmarie/GPX-Route-Planner Online demo: https://patricklmarie.github.io/GPX-Route-Planner/
Après l’avoir tester 3 ans sur plusieurs moyens de transport, je partage cette vidéo d’un emballage vélo. Il est en carton de recyclage et filmé, modulable en épaisseur et ajout de papier bulle selon la protection souhaitée.
La pose d’entretoises à la fourche et haubans rend l’emballage compact. Avec la quinzaine d’ €uros d’un filmage en aérogare, cet emballage voyage très bien.
https://youtu.be/_GDJi-GqmkM
- Faible encombrement (1,10mx 0.70mx 0.25m pour un grand cadre) , il tient verticalement dans les compartiment à bagage des trains et la taille totale x+y+z ne dépasse pas 2,40m.
- 2 solutions de portage pour les déplacements en transports en commun et manutention aisée par les agents aéroportuaire (il n’y a plus d’ouvertures dans le carton qui se déchirent).
- Emballage discret quand il s’agit du bon vouloir des chauffeurs de bus et contrôleurs de train car il a l’aspect d’un colis ordinaire.
-Plus d’obligation de retour au point de départ pour retrouver le carton du voyage aller qu’il a bien fallut stocker quelque part ou d’une housse encombrante à ranger dans ses sacoches
- le contrôle de la pression des pneus à travers le film plastique sans trop abimer l’emballage reste possible
Inconvénients : Environ 3 h pour ce travail long et méticuleux, démontage des roues, pédalier, guidon et dérailleur sans déréglage puis fixation de tous les composants au cadre.
Si vous avez l’occasion de le tester, retournez-moi vos commentaires pour de futures améliorations.


peut t-on mettre un vélo électrique dans les trains en Autriche; Allemagne et Suisse
Hi there,
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires. I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time). I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral. I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough? And one last question: white gas stove or can I get by with my gas stove?
Nath
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires. I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time). I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral. I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough? And one last question: white gas stove or can I get by with my gas stove?
Nath
Hi there, I’m planning a cross-Canada bike trip, and I’ve got a question that might seem silly, but could someone tell me how to pack a bike (in a box, with a fragile sticker... I don’t know) for a flight? Thanks in advance!
Hi everyone,
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam. My question is about getting back to Nantes. Do any of you know what the best return option might be? I’d love to hear about your experiences. I saw that FlixBus doesn’t take bikes. By train, I think it’s possible but would involve multiple local trains. We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance! Have a great evening
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam. My question is about getting back to Nantes. Do any of you know what the best return option might be? I’d love to hear about your experiences. I saw that FlixBus doesn’t take bikes. By train, I think it’s possible but would involve multiple local trains. We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance! Have a great evening
I’ve gotten used to crossing Europe by bus to return by bike.
It was really convenient to take the bike without having to disassemble it.
But FlixBus no longer accepts bikes...
What alternatives do you know about?
Thanks.
Hi there,
I’m planning to ride the Dutch section of the EuroVelo 19, from Maastricht to Rotterdam.
Since it’s too complicated to bring my bike on the train, I’m looking to rent one locally.
I’d love any tips or bike rental shop recommendations—I’m struggling to find options even in Rotterdam.
The plan is to rent in Rotterdam, take the train to Maastricht with the bike, then cycle back to Rotterdam.
Thanks in advance for any advice or suggestions!
Nath
Hi there,
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August! Virginie
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August! Virginie
Coming soon:
https://www.Biclou.com/parcours/durance/
Starting from Faverges: 900 km over 9 days

Here’s the detailed Durance route starting from Briançon

Here’s the detailed Durance route starting from Briançon

Hi there,
I’m planning to build a new touring bike. I want to prioritize lightness. That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads. The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper. I’m particularly considering the RockShox Rudy Ultimate XPLR fork. Unlike MTB forks, its travel is short: either 30 mm or 40 mm. It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring. And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear. More generally, how reliable are these kinds of forks?
Thanks in advance
I’m planning to build a new touring bike. I want to prioritize lightness. That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads. The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper. I’m particularly considering the RockShox Rudy Ultimate XPLR fork. Unlike MTB forks, its travel is short: either 30 mm or 40 mm. It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring. And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear. More generally, how reliable are these kinds of forks?
Thanks in advance
Hi everyone,
I wanted to share with you the incredible feat my friend José, who’s 72 years old, is currently undertaking. He left Auterive near Toulouse on Monday, May 18, 2026, on his non-electric bike, heading for the North Cape in Norway!
You can follow his route on the link below—he’s currently in Sweden:
https://thierry-thomas.travelmap.net/jose-de-toulouse-a-nord-cap-2026
You can zoom in on the map and click on each stopover town to see the photos
Hi there!
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.

It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.




One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.


We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.



Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
S.
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.

It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.




One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.


We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.



Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
S.
Hi there, we’re a group of 4 cyclists looking to get from Treviso in Italy to Munich with our 4 non-folding bikes. It seems complicated! Are there any solutions? Thanks so much.
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed story being posted online soon 1100 km in 11 days beautiful and varied regions
claudio

the trip was completed story being posted online soon 1100 km in 11 days beautiful and varied regions
claudio

Hi, I'm looking for a Pino tandem bike for sale in Quebec and I can't find any. Does anyone have any info, please? Thanks a bunch!
Hi there, we’re planning a Munich to Venice bike trip at the end of June 2026. Getting back from Venice to Toulouse by train with 4 bikes isn’t straightforward. What return options have others who’ve done this trip chosen? Any tips or great deals would be much appreciated. Thanks a bunch! !
Hi everyone,
Happy owner of a Pegasus Estremo bike with a Rohloff hub, which is giving me trouble with the SF11-NCX-FT-E-LITE 700C TS 300/0 fork (serial number TD01329060). It’s starting to show its age, and I’d like to repair it to extend the life of my beloved bike.
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Thanks for your help! Have a great day, Alexandre
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Thanks for your help! Have a great day, Alexandre
Hi, I'd like to know if anyone has done this route recently or has reliable info.
Does the track exist, and most importantly, is there sand (for biking)?
Any info is welcome.
Cheers,
diego ambilobe: mangaoka, manondro, ramena vohemar sambava: masondrono, tanambao
diego ambilobe: mangaoka, manondro, ramena vohemar sambava: masondrono, tanambao
Hi there,
New to bike touring,
I’d love to start with a section of the Via Rhona to explore and share (route to be decided).
Looking forward to exchanging tips!
hey everyone,
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
Thanks in advance, Jérôme
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
Thanks in advance, Jérôme
A big thank you to Lazarou for all the info you share in this forum!
I'm passionate about Morocco, which I cycled through back in 2009.
Last year, my wife and I explored the High Atlas by tandem. Completely smitten, we're heading back in April (Anti Atlas) and May (High and Middle Atlas), still on our tandem.
Do you have any info on the track between Amezri and Ali Ait Nito? Are the river crossings in the Tessaout still there? It's not easy to navigate with a loaded tandem... especially if the river level is high due to this year's heavy snowmelt!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
A shout-out to a cycling colleague from Savoie
Claudio specializes in the route of the Savoie lakes Here are his travels Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place Rural and quite peaceful A road cycling route created by Serge B...
N+1 reconnaissance trips on a loop of about 400 km This way, he avoids the SNCF and its troubles http://cbandiera.free.fr/vv/lacs-savoie/recos.php

The latest reconnaissance trip from April to May 2026 http://cbandiera.free.fr/recits/2026-grenoble-H/index.php

Claudio specializes in the route of the Savoie lakes Here are his travels Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place Rural and quite peaceful A road cycling route created by Serge B...
N+1 reconnaissance trips on a loop of about 400 km This way, he avoids the SNCF and its troubles http://cbandiera.free.fr/vv/lacs-savoie/recos.php


The latest reconnaissance trip from April to May 2026 http://cbandiera.free.fr/recits/2026-grenoble-H/index.php

First of all... happy New Year! Wishing you great roads in 2017!
I’ve been traveling for a few years now with a high-quality mountain bike, but it’s equipped with hydraulic disc brakes. I live (pedal) with the constant worry of a breakdown (leak, air bubble, heat causing the fluid to...). My bike mechanic tells me it’s impossible to switch them out for V-brakes.
What do you all think? Am I taking a big risk continuing (alone) with these brakes? Thanks in advance for your great tips!
Hi everyone,
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025. It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border. We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
You’ve been warned.
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025. It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border. We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
You’ve been warned.
Hi there,
I’m planning the route to cycle from Lille to Nordkapp with my partner.
Duration: 3 months, from May 1st to July 31st, 2026.
In the attached details below, I need to add some "non-riding" days (rest days, basically).
So I’m looking to "shorten" the trip by taking ferries or trains for some stretches. Which areas could I skip?
Thanks in advance for your great tips.
Have a good evening.
https://www.komoot.com/fr-fr/collection/4023980/-lille-cap-nord-1er-mai-au-31-juillet-2026?ref=collection
Hi there,
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure! Thanks in advance.
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure! Thanks in advance.
Hi, has anyone recently bought Primus or Butagaz gas, possibly puncture-style, in Dubrovnik or the surrounding area? Same question for Albania... thanks. aichatou
Hi there,
Coming from Laos (*), I’m planning to enter Thailand by bike via the Fourth Thai–Lao Friendship Bridge.
Before this bridge was built, I’d already cycled the road from Louang Namtha to Houei Sai and crossed the river by boat to reach Thailand.
At the time, the condition of that road was impeccable, and most importantly, traffic was light.
So I’m wondering if anyone who’s taken it recently can tell me whether traffic has increased since the bridge opened.
Thanks in advance!
(*) I’m currently cycling in China (Yunnan)
Coming from Laos (*), I’m planning to enter Thailand by bike via the Fourth Thai–Lao Friendship Bridge.
Before this bridge was built, I’d already cycled the road from Louang Namtha to Houei Sai and crossed the river by boat to reach Thailand.
At the time, the condition of that road was impeccable, and most importantly, traffic was light.
So I’m wondering if anyone who’s taken it recently can tell me whether traffic has increased since the bridge opened.
Thanks in advance!
(*) I’m currently cycling in China (Yunnan)