Fabriquer son VTC de A à Z... ou presque
by Richardcyclo
This discussion is in French, the community’s main language.
Original post
Bonjour à tous,
Après avoir lu pas mal de rubrique sur ce sujet et notammment celles traitant de l'achat d'un VTC de telle ou telle marque, je me demande s'il ne serait pas plus judicieux et économique de monter sa propre machine ... de A à Z. Ou presque car je voudrais partir du cadre (sur mesure ou non) et de sa fourche non-suspendue.
Primo je pense que ce serait un très bon exercice pour ceux qui envisagent de faire un tour d'Europe voire du monde car il est illusoire de penser partir avec un vélo neuf de marque sans avoir le moindre réglage à faire ni la moindre réparation. Deuxièmement je souhaiterais que cette rubrique puisse être utile à tous ceux qui envisagent de monter leurs propres VTC soit pour des raisons de coûts (faible budget) ou pour avoir les pièces de leurs choix sans être obligés de faire des compromis par rapport aux modèles imposés par les fabriquants.
J'attends surtout que les "routiers" partagent leurs connaissances et leurs conseils sans que cela ne deviennent une rubrique pour talibans : pour ou contre les roues de 26 ou 28 pouces, remplacer un dérailleur XRT846 BTM par un TCG845RXP, l'erreur qui tue !!! etc etc... 🏴☠️
J'ai commencé sur un vélo décathlon bas de gamme car je ne savais pas si j'allais aimer le cyclotourisme. J'ai crevé une fois et cassé un rayon, mais le souvenir de cette première année sur ce vélo reste excellent. Je ne pense pas qu'il faille du très-haut-de-gamme-très-cher pour randonner à vélo. Ce qui compte le plus, ce sont les réglages de base et si votre chaîne saute, "pleure" ou craque... je pense qu'il faut d'abord aller voir du côté des réglages avant d'incriminer la marque. Après réflexion les dérailleurs avant et arrière ne sont que des ... ressorts 😛
Enfin dernier petit exercice, il faudra que cette machine puisse être électrifiée sur l'exemple d'un VAE : moteur électrique dans le moyeu avant, détecteur au niveau du pédalier. Et redevenir un VTC "sec" pour le côté sportif.
Et pour la route, les avis de tous sont recherchés, Mesdames donnez-nous vos avis et faîtes nous partager vos expériences...
A tous bonne route...
Richard
Bonjour.
Je ne suis pas bien sûr d'avoir tout à fait bien compris ta demande en fait...
Pour ce qui est de se monter son propre vélo, l'aspect "économie" ne me semble pas être le critère premier. Tu arrives à trouver des vélos de séries, entrée de gamme (ou plus haut de gamme) qui sont à des prix "relativement" bas, surtout du côté de toutes les marques allemandes, acheter les pièces une par une pour se monter un vélo identique ne doit pas revenir forcement moins cher, même si avec la VPC on trouve le matériel à un prix + attractif.
La ou c'est intéressant, c'est qu'effectivement montant soit même, on a une meilleure idée de tout les composants et une première approche au niveau de la mécanique (montage/réglage), et qu'on peut choisir ce que l'on veut monter (le montage choisie par une marque ne correspondant pas toujours complètement à ce que l'on cherche). Il y a une chose que je ne ferais pas moi même, c'est le montage des roues. Monter ça droit et obtenir la bonne tension...je préfère laisser ça à un professionnel.
Je ne suis pas bien sûr d'avoir tout à fait bien compris ta demande en fait...
Pour ce qui est de se monter son propre vélo, l'aspect "économie" ne me semble pas être le critère premier. Tu arrives à trouver des vélos de séries, entrée de gamme (ou plus haut de gamme) qui sont à des prix "relativement" bas, surtout du côté de toutes les marques allemandes, acheter les pièces une par une pour se monter un vélo identique ne doit pas revenir forcement moins cher, même si avec la VPC on trouve le matériel à un prix + attractif.
La ou c'est intéressant, c'est qu'effectivement montant soit même, on a une meilleure idée de tout les composants et une première approche au niveau de la mécanique (montage/réglage), et qu'on peut choisir ce que l'on veut monter (le montage choisie par une marque ne correspondant pas toujours complètement à ce que l'on cherche). Il y a une chose que je ne ferais pas moi même, c'est le montage des roues. Monter ça droit et obtenir la bonne tension...je préfère laisser ça à un professionnel.
monter sa propre machine (....) je pense que ce serait un très bon exercice
tout à fait, et ça permet en effet de bien choisir les composants "à la carte" en fonction de l'usage qu'on fera du vélo
pour des raisons de coûts
je ne suis pas sûre qu'on fasse de grosses économies en achetant soi-même à l'unité tous les composants du vélo. Ceci dit, je laisse la parole aux bricoleurs experts, car j'ai un vélo "à la carte" mais je ne l'ai pas monté moi-même.
(...) que cette machine puisse être électrifiée sur l'exemple d'un VAE
plusieurs marques vendent des kits Assistance électrique pour vélo --> voir par exemple le site web cyclurba.fr. Personnellement, même si le but n'est pas de faire de la rando "sportive", je ne recommanderais pas de partir en voyage avec un VAE : l'autonomie des batteries est trop courte pour que ce soit intéressant en-dehors des petits trajets quotidiens.
tout à fait, et ça permet en effet de bien choisir les composants "à la carte" en fonction de l'usage qu'on fera du vélo
pour des raisons de coûts
je ne suis pas sûre qu'on fasse de grosses économies en achetant soi-même à l'unité tous les composants du vélo. Ceci dit, je laisse la parole aux bricoleurs experts, car j'ai un vélo "à la carte" mais je ne l'ai pas monté moi-même.
(...) que cette machine puisse être électrifiée sur l'exemple d'un VAE
plusieurs marques vendent des kits Assistance électrique pour vélo --> voir par exemple le site web cyclurba.fr. Personnellement, même si le but n'est pas de faire de la rando "sportive", je ne recommanderais pas de partir en voyage avec un VAE : l'autonomie des batteries est trop courte pour que ce soit intéressant en-dehors des petits trajets quotidiens.
effectivement, monté son vélo soi-même n'est pas forcément une solution moins couteuse. J'ai monté moi même mon vélo pour un tour du monde prévu en 2011 à partir d'un cadre acier et le résultat avoisine le prix d'un vélo neuf. Cependant, les sites de VPC allemands te permettent d'avoir des pièces plus cheap et les monter soi même permet de se faire la main notamment si l'on envisage de partir.
Idem pour moi concernant les roues, je laisse ça aux pro et je les achète toutes faites chez un bon vélociste.
Sinon quelle satisfaction d'avoir monté seul son vélo... Pas mécontent d'avoir passé beaucoup de temps à choisir tel ou tel composant. Ainsi, je conseille de ne pas se précipiter dans l'achat des pièces pour ne pas se tromper, surtout si les achats se font sur le net à l'étranger...😉
Ah oui, j'oubliais, voici un site relatant la construction d'un salsa casseroll pour ceux que ça interesse et pour avoir une vue d'ensemble : http://www.madsnail.net/blog/2009/01/01/how-to-build-a-bicycle-salsa-casseroll/
Idem pour moi concernant les roues, je laisse ça aux pro et je les achète toutes faites chez un bon vélociste.
Sinon quelle satisfaction d'avoir monté seul son vélo... Pas mécontent d'avoir passé beaucoup de temps à choisir tel ou tel composant. Ainsi, je conseille de ne pas se précipiter dans l'achat des pièces pour ne pas se tromper, surtout si les achats se font sur le net à l'étranger...😉
Ah oui, j'oubliais, voici un site relatant la construction d'un salsa casseroll pour ceux que ça interesse et pour avoir une vue d'ensemble : http://www.madsnail.net/blog/2009/01/01/how-to-build-a-bicycle-salsa-casseroll/
Merci pour vos réponses.
Il semblerait que les offres des fabriquants vous satisfassent, tant mieux ... moi je n'ai jamais trouvé un vélo avec par exemple la selle qui me convenait et pour vous donner un exemple j'ai acheté en GIANT neuf pour mes déplacements quotidiens, moins de 500 euros. Eh bien les roues ne me conviennent pas car les jantes sont soudées pour fermer le cercle. Résultat lorsque je freine, les patins font du bruit chaque fois qu'ils passent sur la jointure et cerise sur le gâteau, ils s'usent 2 fois plus vite. Sans trop prendre de risque je suis certain que ce sont des roues bas de gamme.
Voilà c'est ce genre de conseils que j'aurais aimé avoir AVANT l'achat. D'où cette rubrique.
Enfin quand je dis fabriquer son vélo de A à Z, j'entends acheter les roues déjà rayonnées, ce qui n'empêche pas de savoir changer un rayon, d'avoir la clé pour régler la tension. D'ailleurs et c'est le but de ma démarche quelqu'un a t'il une astuce pour changer un rayon cassé côté cassette sans fouet et sans clef, autrement dit sans avoir à démonter la cassette.
J'ai eu le problème cet été, et j'envisage de partir avec le matériel nécessaire sauf si...
A +
Richard
Bonjour,
Pour un tour du monde de 2 ans nous avons fait fabriquer nos cadres sur mesure puis nous avons, à l'aide d'un ami compétent, monté le reste à la carte. Nous avons ainsi pu choisir par exemple le type de rayons, les jantes, les freins pas forcément les plus chers mais les plus efficaces et solides, les transmissions les plus fiables etc... Résultat en 2 ans pas une casse: ni rayon, ni câble, rien. Seule une pédale a foiré, remplacée en Inde par une locale bien dodue! A la fin de la première année nous avons changé à Bangkok les chaînes et tous les câbles ainsi que la paire de pédales défaillante. Je peux vous assurer qu'il est très agréable de rouler l'esprit libre, sans avoir à se demander ce qui va bientôt lâcher. Bonne chance!
Pour un tour du monde de 2 ans nous avons fait fabriquer nos cadres sur mesure puis nous avons, à l'aide d'un ami compétent, monté le reste à la carte. Nous avons ainsi pu choisir par exemple le type de rayons, les jantes, les freins pas forcément les plus chers mais les plus efficaces et solides, les transmissions les plus fiables etc... Résultat en 2 ans pas une casse: ni rayon, ni câble, rien. Seule une pédale a foiré, remplacée en Inde par une locale bien dodue! A la fin de la première année nous avons changé à Bangkok les chaînes et tous les câbles ainsi que la paire de pédales défaillante. Je peux vous assurer qu'il est très agréable de rouler l'esprit libre, sans avoir à se demander ce qui va bientôt lâcher. Bonne chance!
Annie et Alain.
Nous sommes des voyageurs à vélo et non des cyclistes en voyage...
http://pommequiroule.homeip.net
Bonsoir.
Il semblerait que les offres des fabriquants vous satisfassent, tant mieux ...
Aucun de nous n'a dit ça (même si, effectivement, je suis assez satisfait de mon vélo de série...modifié un peu par la suite j'avoue 🙂). On te disait juste que ça ne reviendra pas moins cher de le monter soit même que d'en acheter un déjà monté (mais sur lequel, justement, tout les composant ne te conviendront peut être pas). Bien sûr que si tu le peux, il est mieux de le monter à la carte.
Eh bien les roues ne me conviennent pas car les jantes sont soudées pour fermer le cercle. Résultat lorsque je freine, les patins font du bruit chaque fois qu'ils passent sur la jointure et cerise sur le gâteau, ils s'usent 2 fois plus vite. Sans trop prendre de risque je suis certain que ce sont des roues bas de gamme.
Étonnant, une jante "soudée" est (censée être) plus solide qu'une a "emmanchement" justement.
Pour le rayon côté cassette, je ne sais pas, et n'ai jamais eu à en changer un, mais, il y a un petit outil qui existe, "l'hypercracker", qui permet de démonter une cassette sans avoir fouet/clef, ou alors, si tu as un budget un peu plus conséquent pour faire monter tes roues, DT Swiss à un/des moyeux qui permet de démonter la cassette "sans" outils.
Il semblerait que les offres des fabriquants vous satisfassent, tant mieux ...
Aucun de nous n'a dit ça (même si, effectivement, je suis assez satisfait de mon vélo de série...modifié un peu par la suite j'avoue 🙂). On te disait juste que ça ne reviendra pas moins cher de le monter soit même que d'en acheter un déjà monté (mais sur lequel, justement, tout les composant ne te conviendront peut être pas). Bien sûr que si tu le peux, il est mieux de le monter à la carte.
Eh bien les roues ne me conviennent pas car les jantes sont soudées pour fermer le cercle. Résultat lorsque je freine, les patins font du bruit chaque fois qu'ils passent sur la jointure et cerise sur le gâteau, ils s'usent 2 fois plus vite. Sans trop prendre de risque je suis certain que ce sont des roues bas de gamme.
Étonnant, une jante "soudée" est (censée être) plus solide qu'une a "emmanchement" justement.
Pour le rayon côté cassette, je ne sais pas, et n'ai jamais eu à en changer un, mais, il y a un petit outil qui existe, "l'hypercracker", qui permet de démonter une cassette sans avoir fouet/clef, ou alors, si tu as un budget un peu plus conséquent pour faire monter tes roues, DT Swiss à un/des moyeux qui permet de démonter la cassette "sans" outils.
Une autre solution : intégrer l'expérience des autres et son expérience.
depuis 7 ans au fur et à mesure de mon expérience j'ai adapté mon VTC standard à la randonnée. Aujourd'hui seuls sont d'origine : - le cadre - le sélecteur de plateaux et le dérailleur avant - les freins et poignées de frein - la potence de guidon - la tige de selle à suspension
cherchant la légèreté le prochain changement sera celui du cadre pour un cadre de 10 kg au lieu de 15 kg
depuis 7 ans au fur et à mesure de mon expérience j'ai adapté mon VTC standard à la randonnée. Aujourd'hui seuls sont d'origine : - le cadre - le sélecteur de plateaux et le dérailleur avant - les freins et poignées de frein - la potence de guidon - la tige de selle à suspension
cherchant la légèreté le prochain changement sera celui du cadre pour un cadre de 10 kg au lieu de 15 kg
Merci pour vos remarques et notamment Damsoisans avc son Hypercracker, la prochaine expédition, je pars avec ...
Chatpomme : monter son vélo à la carte, c'est ce que je recherche. Sur le site de forum voyage, beaucoup parlaient de VTC à 2000, voire 3000 euros, rubrique je crois "comment choisir son VTC". D'où ma remarque pourquoi ne pas le faire soi-même ?
Vfpromeneur je suis tout à fait dans ta démarche. Sur mon MBK, il ne reste pas grand-chose d'origine et acheter un vélo en pensant à tout ce que l'on va devoir changer, la note finale risque d'être élevée.
Et pour ajouter ma pierre à l'édifice, je suis comme vfpromeneur à la recherche de la légèreté. Lors de mes périples, il m'arrive de rester plusieurs jours au même endroit afin de découvrir la région et là j'aime avoir un vélo léger et... donc rapide. Je m'inspire du site de la MUL ou randonner-leger car je me considère comme un randonneur à vélo. Chaque année je répertorietout ce que j'ai emporté pour repartir l'année suivante moins chargé.
Enfin petite digression pour tous ceux qui voyagent avec une tente. J'ai dormi cet été dans une tente tipi faite main sans arceau et très légère. Ils suspendaient la tente à une branche et lui donnaient du volume à l'aide de haubans bien placés. Résultat aucune condensation et un démontage en quelques minutes. Pas de photos car mon G9 était en panne mais si vous êtes intéressés il y a un site suédois qui pourrait vous intéresser... A tous merci Richard
Enfin petite digression pour tous ceux qui voyagent avec une tente. J'ai dormi cet été dans une tente tipi faite main sans arceau et très légère. Ils suspendaient la tente à une branche et lui donnaient du volume à l'aide de haubans bien placés. Résultat aucune condensation et un démontage en quelques minutes. Pas de photos car mon G9 était en panne mais si vous êtes intéressés il y a un site suédois qui pourrait vous intéresser... A tous merci Richard
vélo en pièces détachées :
si tu veux un vélo fait à partir de pièces détachées ça va être plus cher sauf si pendant un an tu es à l'affut des promotions sur les pièces détachées comme un ensemble Deore LX que tu peux avoir à 100 € au lieu de 200 €
légèreté :
depuis 2 ans je suis tout à fait dans la démarche de la MUL.
cadre :
je pense de plus en plus à un cadre de cyclocross, vtc fittness etc. : du léger renforcé
ce qui me renforce dans cette idée c'est l'existence de vélo de randonnée de cette sorte
voir
http://www.stevensbikes.de/2010/index.php?bik_id=96&lang=en_US&cou=FR
http://www.stevensbikes.de/2010/index.php?bik_id=88§&lang=en_US&cou=FR
le x6 lite et le x8 lite sont munis : - d'oeillets permettant la pose de porte-bagage avant et arrière - muni d'ensemble Deore (x6) ou Deore xt (x8)
le Deore pèse 1 kg de plus que le deore xt mais est certainement plus solide
si tu veux un vélo fait à partir de pièces détachées ça va être plus cher sauf si pendant un an tu es à l'affut des promotions sur les pièces détachées comme un ensemble Deore LX que tu peux avoir à 100 € au lieu de 200 €
légèreté :
depuis 2 ans je suis tout à fait dans la démarche de la MUL.
cadre :
je pense de plus en plus à un cadre de cyclocross, vtc fittness etc. : du léger renforcé
ce qui me renforce dans cette idée c'est l'existence de vélo de randonnée de cette sorte
voir
http://www.stevensbikes.de/2010/index.php?bik_id=96&lang=en_US&cou=FR
http://www.stevensbikes.de/2010/index.php?bik_id=88§&lang=en_US&cou=FR
le x6 lite et le x8 lite sont munis : - d'oeillets permettant la pose de porte-bagage avant et arrière - muni d'ensemble Deore (x6) ou Deore xt (x8)
le Deore pèse 1 kg de plus que le deore xt mais est certainement plus solide
Log in first, then come back to this page.
You might also like
Densha Otaku - Lesser-Known Regions
Two weeks under the Puglia sun
Back to Swedish Lapland: Trek on the Kungsleden and Crossing Sarek
Off on a winter adventure in the American West!
3 weeks in Laos, stress-free
Draw Me Your Japan...
South Africa in safari mode: February/March 2026
Back in Tunisia (live account)
More discussions
Bonjour,
Je souhaite faire Morlaix Brest ( via Roscoff et la littoral V45) nous commencerons à rouler le 16 aout pour 13 jours (avec des pauses visites iles , surf etc..) Est ce qu'il y a beaucoup de circulation à cette époque de l'année car j'ai 2 enfants de11 et 13 ans et on n'aime pas rouler au milieu des voitures (on a déjà fait velomaritime ; Caen - Cherbourg, loire : Orléans- Saumur, Velodyssée : Nantes - Royans, les canaux : nivernais , bourgogne etc ... et il y avait beaucoup de voies réservées aux vélos ce qui n'est pas le cas sur cet itinéraire).
Merci de votre aide si vous avez déjà parcourue cet itinéraire fin aout. Virginie
Je souhaite faire Morlaix Brest ( via Roscoff et la littoral V45) nous commencerons à rouler le 16 aout pour 13 jours (avec des pauses visites iles , surf etc..) Est ce qu'il y a beaucoup de circulation à cette époque de l'année car j'ai 2 enfants de11 et 13 ans et on n'aime pas rouler au milieu des voitures (on a déjà fait velomaritime ; Caen - Cherbourg, loire : Orléans- Saumur, Velodyssée : Nantes - Royans, les canaux : nivernais , bourgogne etc ... et il y avait beaucoup de voies réservées aux vélos ce qui n'est pas le cas sur cet itinéraire).
Merci de votre aide si vous avez déjà parcourue cet itinéraire fin aout. Virginie
Bonjour,
Ca y est j'ai mon billet d'avion, départ mi novembre, retour mi-mars. arrivée santiago et je repars depuis Buenos Aires. J'ai deja été dans le sud de l'argentine, notamment le parc torres del Paine, et j'ai très envie d'y retourner pour faire le grand W, j'avais fait le petit. Je souhaite aussi randonner qq foois et pourquoi pas faire un sommet. Je grimpe et je fais occasionnellement de l'alpinisme, donc ce sera avec un guide de toute façon.
Je compte démarrer vers temuco au chili, j'ai dans l'idée d'aller vers les lac, puis prendre la careterra austral. Je sais pas si je vais aller jusqu'à Ushuaia, parait que cela vaut pas tant que cela la peine, à part pour dire qu'on a été au bout de la terre.
j'ai vu vite fait qu'il y'avait des lac en Argentine.
Je n'ai pas d'itinéraire précis. Mais ce que je souhiaterai, c'est qu'une fois arriver le plus au sud de mon vooayage, faire une mini croisière pour voir des annimaux. Des conseils pour cela?
qu'avez vous pris comme sac de couchage? un 0 degré suffit?
et ultime question, réchaud à essence ou est-ce que je peux m'en sortir avec mon réchaud gaz?
Nath
Ca y est j'ai mon billet d'avion, départ mi novembre, retour mi-mars. arrivée santiago et je repars depuis Buenos Aires. J'ai deja été dans le sud de l'argentine, notamment le parc torres del Paine, et j'ai très envie d'y retourner pour faire le grand W, j'avais fait le petit. Je souhaite aussi randonner qq foois et pourquoi pas faire un sommet. Je grimpe et je fais occasionnellement de l'alpinisme, donc ce sera avec un guide de toute façon.
Je compte démarrer vers temuco au chili, j'ai dans l'idée d'aller vers les lac, puis prendre la careterra austral. Je sais pas si je vais aller jusqu'à Ushuaia, parait que cela vaut pas tant que cela la peine, à part pour dire qu'on a été au bout de la terre.
j'ai vu vite fait qu'il y'avait des lac en Argentine.
Je n'ai pas d'itinéraire précis. Mais ce que je souhiaterai, c'est qu'une fois arriver le plus au sud de mon vooayage, faire une mini croisière pour voir des annimaux. Des conseils pour cela?
qu'avez vous pris comme sac de couchage? un 0 degré suffit?
et ultime question, réchaud à essence ou est-ce que je peux m'en sortir avec mon réchaud gaz?
Nath
Bonjour à tous,
Cet été nous prévoyons de pédaler sur l'EV 19 qui longe la Meuse de Langres jusqu'à Rotterdam. Mon questionnement concerne le retour jusqu'à Nantes. Savez vous quel est le meilleur retour possible? J'en appelle à vos expériences. Je voyais que Flixbus ne prenait pas les vélos. En train, je pense que c'est possible avec de multiples petits trains. On se questionnait aussi sur l'existence d'un bateau qui irait de Rotterdam jusqu'à St Nazaire et qui pourrait charger des passagers avec vélos.
Toutes vos expériences partagées nous seront bien utiles et nous vous en remercions. Bonne soirée
Cet été nous prévoyons de pédaler sur l'EV 19 qui longe la Meuse de Langres jusqu'à Rotterdam. Mon questionnement concerne le retour jusqu'à Nantes. Savez vous quel est le meilleur retour possible? J'en appelle à vos expériences. Je voyais que Flixbus ne prenait pas les vélos. En train, je pense que c'est possible avec de multiples petits trains. On se questionnait aussi sur l'existence d'un bateau qui irait de Rotterdam jusqu'à St Nazaire et qui pourrait charger des passagers avec vélos.
Toutes vos expériences partagées nous seront bien utiles et nous vous en remercions. Bonne soirée
Coming soon:
https://www.Biclou.com/parcours/durance/
Starting from Faverges: 900 km over 9 days

Here’s the detailed Durance route starting from Briançon

Here’s the detailed Durance route starting from Briançon

Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
Hi there,
I’m planning to build a new touring bike. I want to prioritize lightness. That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads. The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper. I’m particularly considering the RockShox Rudy Ultimate XPLR fork. Unlike MTB forks, its travel is short: either 30 mm or 40 mm. It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring. And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear. More generally, how reliable are these kinds of forks?
Thanks in advance
I’m planning to build a new touring bike. I want to prioritize lightness. That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads. The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper. I’m particularly considering the RockShox Rudy Ultimate XPLR fork. Unlike MTB forks, its travel is short: either 30 mm or 40 mm. It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring. And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear. More generally, how reliable are these kinds of forks?
Thanks in advance
Hi everyone,
I wanted to share with you the incredible feat my friend José, who’s 72 years old, is currently undertaking. He left Auterive near Toulouse on Monday, May 18, 2026, on his non-electric bike, heading for the North Cape in Norway!
You can follow his route on the link below—he’s currently in Sweden:
https://thierry-thomas.travelmap.net/jose-de-toulouse-a-nord-cap-2026
You can zoom in on the map and click on each stopover town to see the photos
Hi there!
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.

It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.




One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.


We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.



Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
S.
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.

It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.




One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.


We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.



Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
S.
Hi there, we’re a group of 4 cyclists looking to get from Treviso in Italy to Munich with our 4 non-folding bikes. It seems complicated! Are there any solutions? Thanks so much.
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed story being posted online soon 1100 km in 11 days beautiful and varied regions
claudio

the trip was completed story being posted online soon 1100 km in 11 days beautiful and varied regions
claudio

Hi, I'm looking for a Pino tandem bike for sale in Quebec and I can't find any. Does anyone have any info, please? Thanks a bunch!
Hi there, we’re planning a Munich to Venice bike trip at the end of June 2026. Getting back from Venice to Toulouse by train with 4 bikes isn’t straightforward. What return options have others who’ve done this trip chosen? Any tips or great deals would be much appreciated. Thanks a bunch! !
Hi everyone,
Happy owner of a Pegasus Estremo bike with a Rohloff hub, which is giving me trouble with the SF11-NCX-FT-E-LITE 700C TS 300/0 fork (serial number TD01329060). It’s starting to show its age, and I’d like to repair it to extend the life of my beloved bike.
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Thanks for your help! Have a great day, Alexandre
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Thanks for your help! Have a great day, Alexandre
Hi, I'd like to know if anyone has done this route recently or has reliable info.
Does the track exist, and most importantly, is there sand (for biking)?
Any info is welcome.
Cheers,
diego ambilobe: mangaoka, manondro, ramena vohemar sambava: masondrono, tanambao
diego ambilobe: mangaoka, manondro, ramena vohemar sambava: masondrono, tanambao
Hi there,
New to bike touring,
I’d love to start with a section of the Via Rhona to explore and share (route to be decided).
Looking forward to exchanging tips!
hey everyone,
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
Thanks in advance, Jérôme
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
Thanks in advance, Jérôme
A big thank you to Lazarou for all the info you share in this forum!
I'm passionate about Morocco, which I cycled through back in 2009.
Last year, my wife and I explored the High Atlas by tandem. Completely smitten, we're heading back in April (Anti Atlas) and May (High and Middle Atlas), still on our tandem.
Do you have any info on the track between Amezri and Ali Ait Nito? Are the river crossings in the Tessaout still there? It's not easy to navigate with a loaded tandem... especially if the river level is high due to this year's heavy snowmelt!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
A shout-out to a cycling colleague from Savoie
Claudio specializes in the route of the Savoie lakes Here are his travels Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place Rural and quite peaceful A road cycling route created by Serge B...
N+1 reconnaissance trips on a loop of about 400 km This way, he avoids the SNCF and its troubles http://cbandiera.free.fr/vv/lacs-savoie/recos.php

The latest reconnaissance trip from April to May 2026 http://cbandiera.free.fr/recits/2026-grenoble-H/index.php

Claudio specializes in the route of the Savoie lakes Here are his travels Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place Rural and quite peaceful A road cycling route created by Serge B...
N+1 reconnaissance trips on a loop of about 400 km This way, he avoids the SNCF and its troubles http://cbandiera.free.fr/vv/lacs-savoie/recos.php


The latest reconnaissance trip from April to May 2026 http://cbandiera.free.fr/recits/2026-grenoble-H/index.php

Tout d'abord... bonne année ! De belles routes à vous en 2017 !
Je voyage depuis quelques années avec un VTT de très bonne qualité mais équipé de freins à disques hydrauliques. Je vis (pédale) avec l'inquiétude d'avoir une panne (fuite, bulle d'air, chaleur qui fait que le liquide...). Mon vélociste me dit qu'il est impossible de les changer pour des V brakes.
Qu'en pensez-vous ? Est-ce que je prends un gros risque à continuer (seule) avec ces freins ? D'avance je vous remercie pour vos bonnes idées.
Hi everyone,
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025. It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border. We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
You’ve been warned.
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025. It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border. We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
You’ve been warned.
Hi there,
I’m planning the route to cycle from Lille to Nordkapp with my partner.
Duration: 3 months, from May 1st to July 31st, 2026.
In the attached details below, I need to add some "non-riding" days (rest days, basically).
So I’m looking to "shorten" the trip by taking ferries or trains for some stretches. Which areas could I skip?
Thanks in advance for your great tips.
Have a good evening.
https://www.komoot.com/fr-fr/collection/4023980/-lille-cap-nord-1er-mai-au-31-juillet-2026?ref=collection
Hi there,
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure! Thanks in advance.
I’m planning to bike back from Poland this summer. Does anyone know a way to ship it there without having to take it apart? Otherwise, it’s a real hassle to fine-tune all the settings before departure! Thanks in advance.
Hi, has anyone recently bought Primus or Butagaz gas, possibly puncture-style, in Dubrovnik or the surrounding area? Same question for Albania... thanks. aichatou
Hi there,
Coming from Laos (*), I’m planning to enter Thailand by bike via the Fourth Thai–Lao Friendship Bridge.
Before this bridge was built, I’d already cycled the road from Louang Namtha to Houei Sai and crossed the river by boat to reach Thailand.
At the time, the condition of that road was impeccable, and most importantly, traffic was light.
So I’m wondering if anyone who’s taken it recently can tell me whether traffic has increased since the bridge opened.
Thanks in advance!
(*) I’m currently cycling in China (Yunnan)
Coming from Laos (*), I’m planning to enter Thailand by bike via the Fourth Thai–Lao Friendship Bridge.
Before this bridge was built, I’d already cycled the road from Louang Namtha to Houei Sai and crossed the river by boat to reach Thailand.
At the time, the condition of that road was impeccable, and most importantly, traffic was light.
So I’m wondering if anyone who’s taken it recently can tell me whether traffic has increased since the bridge opened.
Thanks in advance!
(*) I’m currently cycling in China (Yunnan)
Hi there,
Just a few words about the loop I did by bike in Yunnan.
Entry and exit
I entered China through the Sino-Vietnamese border crossing at Lào Cai / Hekou under the 30-day visa exemption currently available to French nationals and others.
The process was simple and quick. A Chinese police officer even helped me complete my electronic pre-registration at a computer kiosk. I wasn’t aware this formality was required—it’s similar to Thailand’s TM6.
No issues with the bike.
I left the country via the Sino-Laotian border crossing at Mohan / Boten.
The atmosphere was a bit chaotic there, but again, no problems with the bike.
The timing
I visited Yunnan in February 2026.
Weather-wise, at higher altitudes (between 1,500 and 2,000 meters), it was around ten degrees at night and in the mornings, and around twenty degrees at the hottest part of the day.
I had two days of rain, so I took the bus to keep moving. Otherwise, clear blue skies.
Culturally, Chinese New Year fell on February 17th (and the 15 days following), right in the middle of my trip. Because of this, my take on the traffic might be off.
Accommodation and food I always found a hotel to stay in for prices ranging from 8 to 15 €. Except in Kunming (the capital), where many hotels were fully booked (Chinese New Year). I ended up at a 100 € hotel with great value for money.
A bowl of noodles costs about 1.5 € on average.
Onboard electronics Since my smartphone doesn’t support eSIMs, I subscribed to a China plan with my carrier. Otherwise, for much cheaper, Alipay offers eSIMs for foreigners that allow access to services usually blocked for Chinese users (WhatsApp, Facebook, etc.).
An internet connection is essential for paying with Alipay or WeChat, as this payment method is widespread.
I only managed to use Alipay.
Either way, always carry cash because sometimes there’s no signal, or the merchant only accepts WeChat.
Also, it’s best to bring a power adapter when you arrive rather than struggling to find one.
Traffic and roads The Chinese aren’t reckless drivers. They follow traffic rules and watch out for cyclists. This is slightly less true in Xishuangbanna (the region bordering Myanmar and Laos).
In urban areas, there are almost always wide bike lanes, separated from other roads, where bikes, electric mini-scooters, and scooters share the space pretty harmoniously.
The roads are in great condition, and traffic is generally manageable—even light—except for one stretch (Eshan -> Yangwu).
Most traffic is absorbed by expressways, China’s equivalent of highways: toll roads that are off-limits to slow vehicles.
You’re never far from these expressways; sometimes you even ride alongside them, which can be noisy at times.
The climbs are usually reasonable, around 5% to 6%. From what I remember, the steepest section was between Menglun and Mengla, with gradients of 8% to 10%, sometimes more.
Riding at these altitudes—though modest—took a bit of getting used to.
The route I didn’t plan anything in advance. My only goal was to reach Kunming. I don’t know why, but just hearing the name of that city, like Yunnan, always felt dreamy to me.
Here’s the breakdown: Hekou -> Man Hao (94 km); Man Hao -> Yuanyang (64 km); Yuanyang -> Jianshui (bus); Jianshui -> Tong Hai (78 km); Tong Hai -> Chenjiang (85 km); Chenjiang -> Kunming (60 km); Kunming -> Kunyang (60 km); Kunyang -> Eshan (67 km); Eshan -> Yangwu (58 km); Yangwu -> Yuanjiang (59 km); Yuanjiang -> Pu'er (bus); Pu'er -> Dadugang (75 km); Dadugang -> Jinghong (80 km); Jinghong -> Menglun (67 km); Menglun -> Mengyuancun (51 km); Mengyuancun -> Mengla (43 km); Mengla -> Boten (67 km).
Otherwise, I’m currently in Thailand and just hoping my return flight with Qatar won’t get canceled.
Oh well... 😉
Just a few words about the loop I did by bike in Yunnan.
Entry and exit
I entered China through the Sino-Vietnamese border crossing at Lào Cai / Hekou under the 30-day visa exemption currently available to French nationals and others.
The process was simple and quick. A Chinese police officer even helped me complete my electronic pre-registration at a computer kiosk. I wasn’t aware this formality was required—it’s similar to Thailand’s TM6.
No issues with the bike.
I left the country via the Sino-Laotian border crossing at Mohan / Boten.
The atmosphere was a bit chaotic there, but again, no problems with the bike.
The timing
I visited Yunnan in February 2026.
Weather-wise, at higher altitudes (between 1,500 and 2,000 meters), it was around ten degrees at night and in the mornings, and around twenty degrees at the hottest part of the day.
I had two days of rain, so I took the bus to keep moving. Otherwise, clear blue skies.
Culturally, Chinese New Year fell on February 17th (and the 15 days following), right in the middle of my trip. Because of this, my take on the traffic might be off.
Accommodation and food I always found a hotel to stay in for prices ranging from 8 to 15 €. Except in Kunming (the capital), where many hotels were fully booked (Chinese New Year). I ended up at a 100 € hotel with great value for money.
A bowl of noodles costs about 1.5 € on average.
Onboard electronics Since my smartphone doesn’t support eSIMs, I subscribed to a China plan with my carrier. Otherwise, for much cheaper, Alipay offers eSIMs for foreigners that allow access to services usually blocked for Chinese users (WhatsApp, Facebook, etc.).
An internet connection is essential for paying with Alipay or WeChat, as this payment method is widespread.
I only managed to use Alipay.
Either way, always carry cash because sometimes there’s no signal, or the merchant only accepts WeChat.
Also, it’s best to bring a power adapter when you arrive rather than struggling to find one.
Traffic and roads The Chinese aren’t reckless drivers. They follow traffic rules and watch out for cyclists. This is slightly less true in Xishuangbanna (the region bordering Myanmar and Laos).
In urban areas, there are almost always wide bike lanes, separated from other roads, where bikes, electric mini-scooters, and scooters share the space pretty harmoniously.
The roads are in great condition, and traffic is generally manageable—even light—except for one stretch (Eshan -> Yangwu).
Most traffic is absorbed by expressways, China’s equivalent of highways: toll roads that are off-limits to slow vehicles.
You’re never far from these expressways; sometimes you even ride alongside them, which can be noisy at times.
The climbs are usually reasonable, around 5% to 6%. From what I remember, the steepest section was between Menglun and Mengla, with gradients of 8% to 10%, sometimes more.
Riding at these altitudes—though modest—took a bit of getting used to.
The route I didn’t plan anything in advance. My only goal was to reach Kunming. I don’t know why, but just hearing the name of that city, like Yunnan, always felt dreamy to me.
Here’s the breakdown: Hekou -> Man Hao (94 km); Man Hao -> Yuanyang (64 km); Yuanyang -> Jianshui (bus); Jianshui -> Tong Hai (78 km); Tong Hai -> Chenjiang (85 km); Chenjiang -> Kunming (60 km); Kunming -> Kunyang (60 km); Kunyang -> Eshan (67 km); Eshan -> Yangwu (58 km); Yangwu -> Yuanjiang (59 km); Yuanjiang -> Pu'er (bus); Pu'er -> Dadugang (75 km); Dadugang -> Jinghong (80 km); Jinghong -> Menglun (67 km); Menglun -> Mengyuancun (51 km); Mengyuancun -> Mengla (43 km); Mengla -> Boten (67 km).
Otherwise, I’m currently in Thailand and just hoping my return flight with Qatar won’t get canceled.
Oh well... 😉
Hi! I’m planning to visit the Stockholm Archipelago by bike in early April.
Do you know if the boats will be running between the different islands at that time of year? For those who’ve already been, all your tips and recommendations are welcome—accommodation, etc. Also, do you know where I can rent a bike in Stockholm? Thanks so much in advance for your help!
Hello there, pedal-powered Young Boys!
Claudio (still from Faverges)
dreaming about a cycling getaway in Italy from Faverges (train all the way to Turin)
from Turin down to Venice along the Po River and back via the Padana (Alta Italia da attraversare – Northern Italy to cross)
The tricky part is getting from Chioggia to Venice.
I read it’s possible by hopping on a boat from island to island,
but it sounds a bit stressful.
Has anyone already tackled this route?
Thanks, and cheers to all! http://cbandiera.free.fr/parcours/Padania/
Claudio
Thanks, and cheers to all! http://cbandiera.free.fr/parcours/Padania/
Claudio

Hi there,
I’m currently looking for a bike to do my first bike trip across France, with the ultimate goal of cycling through Latin America. I’ve got a lot of questions and I’d love to hear if you have any answers or advice to share. First off, I’ve been through this before with hiking. I want to get top-quality gear right away. When I started hiking, I ended up buying everything three times—first beginner gear, then intermediate, then expert, etc. For biking, I’d prefer to skip that process and invest right now in a bike that could ideally handle Latin America. I’ve set a total max budget of around 5000 € (roughly 4000–4500 € for the bike and the rest for accessories: panniers, helmet, cycling shorts, etc.).
So, I’ve got quite a few questions:
* I’ve read in several places that some people recommend buying the bike directly in Latin America. Since I need a first bike to train in Europe, would it be better to buy an entry-level bike in France (and sell it before the big departure)? Or is it preferable to start right away with my final bike to get used to it? Is buying it there just to save a bit of money?
* For a long-term trip (around six months) in Latin America, is it better to go for a gravel bike or a mountain bike?
* Should I buy a new bike or a refurbished one? Even more so given that I’m planning a long trip—could a refurbished bike end up causing more breakdowns?
If you have any advice on models, technical features to prioritize, or recommended sellers or resellers, I’d love to hear it. I’m a total beginner—I’ve only just started watching videos and reading up on the subject, and all the technical specs are new to me!
Thanks in advance for your help!
I’m currently looking for a bike to do my first bike trip across France, with the ultimate goal of cycling through Latin America. I’ve got a lot of questions and I’d love to hear if you have any answers or advice to share. First off, I’ve been through this before with hiking. I want to get top-quality gear right away. When I started hiking, I ended up buying everything three times—first beginner gear, then intermediate, then expert, etc. For biking, I’d prefer to skip that process and invest right now in a bike that could ideally handle Latin America. I’ve set a total max budget of around 5000 € (roughly 4000–4500 € for the bike and the rest for accessories: panniers, helmet, cycling shorts, etc.).
So, I’ve got quite a few questions:
* I’ve read in several places that some people recommend buying the bike directly in Latin America. Since I need a first bike to train in Europe, would it be better to buy an entry-level bike in France (and sell it before the big departure)? Or is it preferable to start right away with my final bike to get used to it? Is buying it there just to save a bit of money?
* For a long-term trip (around six months) in Latin America, is it better to go for a gravel bike or a mountain bike?
* Should I buy a new bike or a refurbished one? Even more so given that I’m planning a long trip—could a refurbished bike end up causing more breakdowns?
If you have any advice on models, technical features to prioritize, or recommended sellers or resellers, I’d love to hear it. I’m a total beginner—I’ve only just started watching videos and reading up on the subject, and all the technical specs are new to me!
Thanks in advance for your help!
Calling all travelers.
We’ll be landing at Lyon Airport and want to bike to La Verpillière train station (with panniers and camping gear, etc.) to catch a TER to Voreppe.
What’s the safest route for this bike trip?
Thanks in advance
hi,
I'm planning a recumbent bike trip from the Pyrenees to Greece. On the EuroVelo 8 route, it doesn't specify the path through the Alps.
Are there any experienced cyclists here who can tell me where they go to avoid climbing too high?
Also, is there another traveler/bike forum better suited for broadening the responses?
thanks

