Voila cela fait maintenant 2 mois que je possède le cyclo randonnée mais jai vraiment du mal avec le guidon ..🏴☠️
Sur mon ancien biclou c'etait un guidon simple mais il m arrivé d avoir mal sur le coté externe de la paume de la main ( surement canal carpien ) sur les longs voyages
Plusieurs points me correspondent pas sur ce genre de guidons pourtant auparavant sans avoir essayer je pensé que c etait le pied 😉
Mais voila :
Je met un schéma pour mieux vous expliquer ci dessous ces quelques points
Problème peu d espace au niveau des poignets ( ou se les sélecteurs de vitesse )
Gène avec les shifter sélecteur de vitesse ( pourtant décalé au max )
Gène au niveau de coude qui remonte a chaque extrémité des poignets ( impression de compression du canal carpien )
Courbure de la barre des poignets non droite / \ donc appuie sur le canal carpien
J'aimerai donc savoir si des personnes se sente mal a l'aise par rapport au même défaut que je trouve a ces guidons
Mon problème principal est le manque d 'espace sur la barre des poignets ( pourtant jai de petite paluche )
Me conseiller vous de changer de guidon ou simplement de réorienter le guidon plus a plat ?
Pour le mal des mains quelque a til essayer cela ?
Tu devrais essayer différents réglages en faisant pivoter le cintre et en utilisant le fait que ta potence est réglable. Tu finiras forcément par trouver une position de conduite qui te conviendra ... ou alors il te faudra changer de cintre.
[...] rien n'étant jamais parfait, rien n'est jamais parfaitement désespéré [...]
mon guidon est complètement inversé (d'origine) par rapport au tien. De ce fait, les manettes sont fixées à la partie basse, près de la potence et les "ailes" du papillon permettent une grande diversité de positions. Peut-être à essayer ?
J'essaye de trouver une photo plus explicite.(voir le vélo avec sacoche de guidon verte.
Patience !
pas de vent favorable pour celui qui ne sait où il va
Confucius
Je vais donc essayer de la mettre plus à plat pour voir si cela est mieux..
je trouve par exemple dans les monter au vue du peu liberté des mains que c'est plus galère que mon ancien guidon..
Enfin sur les longues distance cela risque de faire mal , c'est surtout cette sensation de compression au extérieur des paumes qui me fait bizarre
il m a fallu un petit temps d adaptation , , et apres differents reglages tout va bien
bonne preparation
BERNARD "Aucun conseil n'est plus loyal que celui qui se donne sur le navire en péril.
Voiture : Invention ingénieuse, permettant de contenir 110 chevaux dans le moteur et un âne au volant.
Bonjour, j'ai mis pas mal de temps à trouver la meilleure position pour le papillon, le mien est presque horizontal et la potence réglée verticalement, du coup, les câbles passent au dessus de la potence, ce qui fait une position dos droit pour utiliser les commandes et une position plus couché pour les lignes droite et les côtes plus la position intermédiaire sur les côtés.
Il faut faire pas mal d'essais.
Le gros avantage de toutes ces position, c'est aussi le changement d'inclinaison du bassin qui permet de varier la pression sur les fesses.
Sinon pour la ville au quotidien j'ai un autre vélo à guidon droit
J'avais un peu de mal aussi au départ, mais après quelques sorties pour fignoler les réglages (hauteur et angle de la potence et l'inclinaison du guidon)
En revanche je n'utilise presque jamais les côtés du guidon, j'utilise surtout la position basse, quand j'ai besoins de mes freins.Sinon la position haute qui me détend les épaules et les cervicales (énormément arthrosé)
Pour moi, un guidon plat muni de bar end type cornes de vache est beaucoup plus performant car réglable en tous sens pour une utilisation quasi identique.
Et rien à modifier ou adapter
Daniel
"Ne cherche pas à suivre les traces d'un autre, cherche plutôt à savoir ce qu'il cherchait."
Ok je vois que pas mal de monde le met à plat en général..
Je vais essayer à plat puis si cela me convient pas je me prend un guidon simple avec poignet ergonomique et cornes..
je me suis toujours contenté d'un cintre droit, simple ... malgré mes "canaux carpiens" un peu atteint .... il existe maintenant d'excellentes poignées ergonomiques (renflement au niveau de la paume - gel pour "filtrer" les vibrations) prolongées par des "cornes" .... L'important me semble être la garniture du cintre, sa capacité à réduire les micro-chocs ou les vibrations dues à la route et au moins une possibilité de modifier l' orientation du poignet ....
On parle ergonomie donc les avis sont subjectifs mais perso, je suis pas fan des cintres papillon. Ils ont vocation à pouvoir changer de positions des mains sur le guidon et c'est très bien mais dans la plupart des modèles, les position alternatives à celle avec les mains sur les commandes n'offrent pas beaucoup plus de confort. Notamment, avoir une position de croisière où l'on puisse se relever un peu. Par exemple, avec le cintre que tu as Nicolas, si tu veux mettre tes mains sur la partie supérieure du cintre, tu te retrouves trop en avant.
Le cintre qu'a montré Yvesvan est un peu mieux je trouve.
Du coup, après des milliers de kilomètres à me demander ce que je voulais vraiment, j'ai bricolé mon propre cintre. Ca demande des pièces adéquates et un peu de bricolage mais j'ai le résultat idéal pour moi.
J'aurais du mal à expliquer comment je l'ai fait par message et je n'ai pas de photos de l'intérieur.
A la base, j'ai un cintre plat classique, avec des cornes toutes simples. Aux extrémités des cornes, j'ai pu fixer des attaches de cornes. Ces attaches sont spécifiques, normalement, elles se fixent sur un cintre et ensuite, elles ont une partie réglable qui se met à l'intérieur de la corne à fixer. Elles sont équipées d'un système de fixation sur le même principe que ceux des potences pour fourches vissées, avec un plongeur/expandeur. J'ai donc installé ces fameuses attaches de cornes sur en haut des premières cornes. Et j'ai trouvé un cintre de ville classique en acier dont le diamètre intérieur correspondait avec les attaches de cornes.
Il a fallu que j'adapte ce cintre pour le mettre en forme, un peu plus cintré. Pour ça, je l'ai scié à plusieurs endroits pour pouvoir le plier à ma guise. Je l'ai aussi coupé pour qu'il soit à la bonne longueur. J'ai installé le tout et j'ai fini par souder les endroits où j'avais scié le cintre.
Ca irait mieux avec des photos cette explication mais je n'en ai pas.
En tout cas, je suis hyper satisfait par ce système car il m'offre plein de positions et notamment une position de croisière bien relevée. Depuis, je peux enchainer plusieurs journées à plus de 100km sans avoir de fatigue corporelles dues à ma position sur le vélo. Un luxe !
En espérant que cela inspire certain.e.s
A+
Matt
Le vélo, c'est bien, même pour celleux qui n'en font pas.
Oula merci pour toute ces réponses variées c'est vrai que ces jours ci je ne trouve pas le temp de venir sur le site
Koaclarck waaaa quel guidon ça doit être super confortable c'est clair ..
c'est une sorte de guidon multiforme idéale pour le long trajet.au moin il est unique et en un seul exemplaire 😉
Lethieu c'est sur que la matière du revêtement du guidon y fait beaucoup.. Après cuir pas cuir ou synthétique tel est la question même si je pense que le cuir est un bon choix
Sagel le guidon orientable est aussi une très bonne solution au mal de poignet par contre il est livré avec ou sans revêtement ?
Je confirme aujourd'hui que le guidon papillon n'est pas fait pour moi.. A peine 20 km et déjà mal à la pliure des bras + mal de poignet..
Je me voit pas le mettre à plat car je suis quand mème bien à l avant sur mon guidon
il me faut un autre guidon je pense..
C'est trop inconfortable pour moi
Le guidon de sagel me paraît intéressent
dois je changer de potence ?
En sachant que celle actuelle est une orientable ou mettre une potence normale ?
Ou bien deuxième solution mettre un cintre normal avec corne
et enfin troisième solution
changer là potence et en mettre une normale et mettre un papillon normal ( pas celui que j'ai qui est en 8 mai l'autre type je ne sais plus le nom)
Bonjour,
Il existe en ligne pédaler intelligent la biomécanique du cycliste de Francois Pedenoir. Il y'a beaucoup a lire mais tu trouveras des solutions. Des fois des petits réglages apportent beaucoup de confort. Je pense que tu écrase le canal carpient. Ce qui entraine tes douleurs
A+
Tu as aussi le cintre de course qui possède aussi pas mal d'avantages entre autres beaucoup de positions différentes et qui n'a à mes yeux que l’inconvénient des poignées de freins peu accessibles dans nos positions de randonneurs. Mais il existe des doubles commandes.
On peu aussi le surmonter d'un mini guidon pour la position de détente.
"Ne cherche pas à suivre les traces d'un autre, cherche plutôt à savoir ce qu'il cherchait."
Sagel le guidon orientable est aussi une très bonne solution au mal de poignet par contre il est livré avec ou sans revêtement ?
Je confirme aujourd'hui que le guidon papillon n'est pas fait pour moi.. A peine 20 km et déjà mal à la pliure des bras + mal de poignet..
Je me voit pas le mettre à plat car je suis quand mème bien à l avant sur mon guidon
il me faut un autre guidon je pense..
C'est trop inconfortable pour moi
Le guidon de sagel me paraît intéressent
dois je changer de potence ?
En sachant que celle actuelle est une orientable ou mettre une potence normale ?
Il est livré avec mousse déjà installée.
C'est un guidon standard, ça m'étonnerait que tu es à changer la potence (je n'ai pas eu à le faire). Par contre, il faut une fixation spéciale si tu veux mettre une sacoche avant.
Avec les douleurs que tu décris, j'ai quand même l'impression que ce n'est pas qu'un problème de guidon mais de position globale : trop en avant, en appui sur les avants-bras.
Autre chose : le guidon doit être assez large pour que tes bras soit dans l'alignement de tes épaules : tes mains doivent avoir le même écartement que tes épaules.
J'ai monté un guidon papillon, et au début j'ai eu de nombreuses douleurs après plusieurs heures passées sur le vélo: engourdissement des mains, douleur dans les pommes, mais surtout douleurs vives dans les coudes, qui devenaient inquiétantes et me dérangeaient dans d'autres activités (escalade, natation, ...) voire même au repos.
Je ne pense pas qu'il y ait une solution valable pour tous, le confort à vélo étant à adapter à chaque morphologie, mais voici comment j'ai amélioré mon guidon papillon:
-déjà j'ai position assez verticale du guidon, pour avoir une position très basse, aérodynamique (position avec les commandes) et une position très relevée, très confort (type vélo de ville), la seule limite étant de pouvoir encore tenir confortablement le guidon avec les mains verticales (sur les côtés). En position haute, l'effort sur les mains est beaucoup plus faible et permet donc de se soulager efficacement les appuis
-comme vous je trouvai mon guidon trop droit (problème du canal carpien), je l'ai donc déformé pour lui donner de l'angle, c'est-à-dire légèrement en V (l'intérieur plus en avant que l'extérieur, pas facile à expliquer). En gros au niveau des pouces, mon guidon est plus en avant et un peu plus relevé qu'au niveau des petits doigts. Grâce à cela plus aucune douleurs dans les coudes!
-j'ai découpé la mousse fournie que j'ai remplacé par une paire de poignées ergonomiques (appuis plus larges au niveau de la paume) pour la position basse : presque plus de douleurs dans les mains
Cela dit je trouve que mon guidon papillon ne "remonte" pas aussi tôt que le votre, ce qui doit expliquer que même avec mes grosses paluches je n'ai pas cette sensation d'être à l'étroit.
Donc vu le prix d'un guidon papillon (- de 20€) on ne prend pas beaucoup de risque à le déformer pour trouver le confort
Finalement je viens de trouver une solution a mes problème ergonomique et ainsi que sur le type de guidons ..
J'ai les jambes longues mais les bras court ..🙁
Soit le vélo nest pas adapté a ma morphologie ou bien c'est le potence de 100 mm trop longue pour moi mais je pense que c'est plutôt un mix des deux ce qui fait que je suis loin et bas en même temp ..
J'ai trouver peut être une solution pour me remonter et etre assez proche de mon guidon a la fois ..
Elle offre un angle de 60 ° pour 75 mm mieux que les 40 ° et 100 mm ( trop longue et peu d'angle ce qui m’éloigne davantage )
Seul problème pas aheadset ..Il va falloir que je degage l'etoile prevu pour le aheadset ..
Mais le grand avantage est la hauteur qu offre cette potence ( avec sa longue tige )
Voila en faite il faut au final plus remonter et plus vers moi a la fois si vous voyez ce que je dire ..
Avec cela il me faudra un guidon offre plus de liberté a mes mains
Quen pensez vous de cette solution ?
Je sais q'au final cela va me couter plus cher mais le confort na pas de prix ..🙂
sagel bonsoir
je suis interressé par se guidon réglable mais je ne trouve aucune doc. qui me donne ses dimensions
largeur total, hauteur, et surtout largeur des poignées ( trop petites sur celui que j'ai actuellement)
se demonte t'il a la potence pour enfiler les poigées de freins et de changement de vitesses?
je te serait reconnaissant de bien vouloir me donner ces infos
merci
cordialement
samuel
BERNARD "Aucun conseil n'est plus loyal que celui qui se donne sur le navire en péril.
Voiture : Invention ingénieuse, permettant de contenir 110 chevaux dans le moteur et un âne au volant.
Samuel :
voilà les mesures prises sur le guidon :
largeur totale : environ 65 cm (le mien n'est pas droit, donc c'est une estimation)
hauteur maximum : 18 cm
largeur maximum des poignées (en bas) : 11 cm
Pour les freins et les vitesses, il faut les rentrer par les extrémités, je ne me suis pas amusée à démonter le centre du système de guidon pour les faire passer !
BERNARD "Aucun conseil n'est plus loyal que celui qui se donne sur le navire en péril.
Voiture : Invention ingénieuse, permettant de contenir 110 chevaux dans le moteur et un âne au volant.
merci sagel
sympa de ta part
je reflechi encors entre cette solution et un cintre plat recourbée avec extension ergonomique
toi tu dis être satisfait de ton guidon?
a plus
samuel
Oui, ce guidon me permet de ne pas multiplier les tendinites aux poignées que j'avais avant. 🙂
Seul inconvénient : la mousse, qui est très fragile (et spécifique). Dès qu'on pose le vélo contre un mur ou autre, si je ne fais pas attention, il s'arrache. Je l'ai doublé de scotch, pas esthétique mais pratique.
sagel bonsoir
je suis interressé par se guidon réglable mais je ne trouve aucune doc. qui me donne ses dimensions
largeur total, hauteur, et surtout largeur des poignées ( trop petites sur celui que j'ai actuellement)
se demonte t'il a la potence pour enfiler les poigées de freins et de changement de vitesses?
je te serait reconnaissant de bien vouloir me donner ces infos
merci
cordialement
samuel
Les gaines en mousse que met Julien sur ses guidons ne sont pas extra. Préférer les grips en Cuir de chez BBB : http://fr.bbbcycling.com/bike-parts/grips/BHG-29. C'est cher (45 €) mais c'est hyper confortable.
J'ai un triple pédalier Stronglight Impact 46/34/24 et un dérailleur avant Shimano FDM610 (capacité 18 dents). Je les ai monté sur mon cadre il y a un mois.…
J'utilise WarmShower depuis 4-5 ans, notamment à partir de l'accès cartographique. Depuis un peu plus d'un an, la carte ne s'affiche plus (ni sur IE ni sur…
Je fais appel une fois de plus à vos compétences et conseils. je viens de partir 2 semaines avec le vélo ci dessous (Focus Mares) et j'ai eu les mains, la…
Je reviens encore vers la communauté voyage forum avant mon départ pour la vélodyssée demain! Il s'agit d'un problème potentiel de ma nouvelle selle brook B17…
😎Fellow traveling cyclists or not, all of you who love travel, the pleasure of physical effort, nature, beautiful machines, people with true passions they seek to fulfill, and who also enjoy reading great literature about all this—the *200* magazine is for you just as it is for me. I should mention I have no financial or other interest in this (in an era where we accuse our politicians of all sorts of vile interests, I prefer to take precautions). I’ve been subscribed since the beginning, and every three months, I get my 130 pages of dreams (the magazine just went from 110 to 130 pages).
It covers everything from the trans-America route to the TCR (Trans Continental Race) from Belgium to a small town in Turkey, with mind-blowing averages—4,000 km and 80,000 m of elevation gain in 8 days and 15 hours for the winner. Let that sink in, and all of it without assistance—accepting a patch could penalize you. There’s also a story about crossing Iran, encountering one of the world’s most welcoming populations, following in the footsteps of Nicolas Bouvier, as well as retirees leisurely traversing France. The common thread in all these stories? Beautiful writing. Take, for example, a stunning article: *"Passengers of the Cold: From Edinburgh to Thurso, at the very north of Scotland, 550 km of moors, coasts, and icy wind. In Thurso, the road ends at a quay, facing the Orkney Islands. We wanted a November trip, off-season. We wanted to surprise winter. Just before the snow."* A sublime piece on the experience of facing adversity and the chance encounters along the road and in the elements.
Before I embarked on my own bike trips, I dreamed a lot about them—from the Atacama to the Gobi, along the Mekong, and not forgetting France. And now, these 130 pages every quarter keep those dreamy vibes alive through stories written in the most beautiful prose.
I’ll stop here because it might sound like I’m advertising, but if you don’t know *200*, I invite you to discover it. It’ll give you wings for the most incredible challenges or simply reinforce your desire for slow rides with your eyes open to others and nature.
A little news to wrap up: Axel Carion and a friend just broke the record for crossing South America from Colombia to Ushuaia in 59 days. On its own, that doesn’t mean much, but I can’t help it—it makes me dream. You should see how he talks about it, the flashes of that wild nature he’s stored away: a snowstorm at Paso Jama and the surreal sight of the suddenly snow-covered Licancabur!
Luc
PS: The magazine is called *200* because a day’s ride starts at 200 km—well, I’ve never done a ride like that since my longest was 167 km (with 18 kg of luggage, mind you), but why not one day? The magazine will explain how to tackle your first 200, and then the question in conclusion: when will you do your first 300?😏
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed
story being posted online soon
1100 km in 11 days
beautiful and varied regions
Hello,
We’d like to go on a 3- to 4-month bike trip starting in December, crossing from Assam (northeast India) to New Delhi via Nepal.
Are there routes with light traffic along the Brahmaputra and through Nepal?
We’re also looking for any info on accommodations, wild camping, local interactions, etc.
Thanks,
Michel
Hello,
Has anyone here had experience using a gas stove in Sardinia and Sicily? I’m wondering if screw-on gas canisters (not the blue Campingaz ones, but brands like Coleman, Primus, etc.) are easy to find.
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August!
Virginie
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires.
I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time).
I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral.
I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough?
And one last question: white gas stove or can I get by with my gas stove?
Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
I'm developing a free and open-source web app for planning walking and cycling trips (and even car trips). You can create a route by clicking directly on the map to add waypoints, and it can consist of multiple stages. The app provides tools to edit the stages and the overall route, and to display useful information (distances, altitudes, and elevation changes). A relief profile can be shown as a graph for a specific stage or the entire route.
Once the route is ready, it can be exported as a GPX file, which can then be used with a GPS or a mobile navigation app.
The app is built in JavaScript and runs entirely in the web browser. It uses the Leaflet library and several OpenStreetMap-based services. Initially developed for my personal needs (I enjoy hiking and cycle touring), I’d be happy to share it with anyone who might find it useful. It’s free to use, doesn’t require an account, and the source code is available.
After testing it for three years across various modes of transport, I’m sharing this video of a bike packing case. It’s made from recycled cardboard and shrink-wrapped, with adjustable thickness and added bubble wrap depending on the level of protection you want.
Installing spacers at the fork and chainstays makes the packaging compact. With the fifteen-odd euros for shrink-wrapping at the airport, this case travels really well.
https://youtu.be/_GDJi-GqmkM
- Low bulk (1.10m x 0.70m x 0.25m for a large frame), it fits vertically in train luggage compartments and the total dimensions (x+y+z) don’t exceed 2.40m.
- Two carrying solutions for public transport and easy handling by airport staff (no more tears in the cardboard from openings).
- Discreet packaging when dealing with bus drivers and train conductors, as it looks like an ordinary parcel.
- No need to return to the starting point to retrieve the case from your outbound trip, which you’d otherwise have to store somewhere, or deal with a bulky cover to pack in your panniers.
- You can still check tire pressure through the plastic film without damaging the packaging too much.
Drawbacks: Around 3 hours for this lengthy and meticulous process—removing the wheels, pedals, handlebars, and derailleur without misaligning them, then securing all components to the frame.
If you get a chance to test it, send me your feedback for future improvements.
Hi there, I’m planning a cross-Canada bike trip, and I’ve got a question that might seem silly, but could someone tell me how to pack a bike (in a box, with a fragile sticker... I don’t know) for a flight? Thanks in advance!
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam.
My question is about getting back to Nantes.
Do any of you know what the best return option might be? I’d love to hear about your experiences.
I saw that FlixBus doesn’t take bikes.
By train, I think it’s possible but would involve multiple local trains.
We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance!
Have a great evening
I’ve gotten used to crossing Europe by bus to return by bike.
It was really convenient to take the bike without having to disassemble it.
But FlixBus no longer accepts bikes...
What alternatives do you know about?
Thanks.
Hi there,
I’m planning to ride the Dutch section of the EuroVelo 19, from Maastricht to Rotterdam.
Since it’s too complicated to bring my bike on the train, I’m looking to rent one locally.
I’d love any tips or bike rental shop recommendations—I’m struggling to find options even in Rotterdam.
The plan is to rent in Rotterdam, take the train to Maastricht with the bike, then cycle back to Rotterdam.
Thanks in advance for any advice or suggestions!
Nath
I’m planning to build a new touring bike.
I want to prioritize lightness.
That said, I’m tempted by a suspension fork that could offer some comfort on rougher roads.
The recent appearance of gravel suspension forks on the market might meet my needs—at least on paper.
I’m particularly considering the RockShox Rudy Ultimate XPLR fork.
Unlike MTB forks, its travel is short: either 30 mm or 40 mm.
It weighs 1400 g, which is 400/500 g more than a steel fork.
Any thoughts or real-world feedback on this?
I’m also wondering about the durability of magnesium (lower leg) for long-distance bike touring.
And what’s the impact of skipping the manufacturer-recommended maintenance every 50 and 200 hours? That’s bound to happen on a long trip unless you carry extra gear.
More generally, how reliable are these kinds of forks?
I’m making an exception and creating a separate post this time, since it’s all about France. In May, we spent a week in Provence, specifically in the Luberon, exploring the cycling routes *Autour du Luberon à Vélo*, the *Véloroute du Calavon* (part of EuroVelo 8), and the shorter *Les Ocres à Vélo* route. Together, they gave us an amazing journey through rolling hills, vineyards, lavender fields still green in spring, and some of the most stunning landscapes in southern France.
It was, of course, the perched villages that impressed us the most. We visited Gordes, Roussillon, Bonnieux, Lacoste, Lourmarin, Ménerbes, Oppède-le-Vieux, Cucuron, and Lauris. Many of them are among the most beautiful villages in Provence, and it’s hard not to agree with that reputation.
One interesting point is the route of EuroVelo 8 in this part of the region. The official path mainly follows the old railway line of the *Véloroute du Calavon*, which is very comfortable and safe. But in our opinion, cyclists traveling EuroVelo 8 around the Mediterranean would discover even more treasures if the route passed through villages like Bonnieux, Lacoste, or Oppède-le-Vieux.
We were also pleasantly surprised by how safe cycling felt. Most of the route takes small local roads, but traffic is light, drivers are respectful, and road design really takes cyclists into account. It’s one of those places where you can ride peacefully even without separated bike lanes.
Our full story:
Around Luberon by bicycle - the most beautiful villages of Provence
You can also find all our cycling travel stories on the forum:
Cycling Thread - Europe’s most beautiful bike routes
Hi there, we’re a group of 4 cyclists looking to get from Treviso in Italy to Munich with our 4 non-folding bikes. It seems complicated! Are there any solutions? Thanks so much.
Hi there, we’re planning a Munich to Venice bike trip at the end of June 2026. Getting back from Venice to Toulouse by train with 4 bikes isn’t straightforward. What return options have others who’ve done this trip chosen? Any tips or great deals would be much appreciated. Thanks a bunch! !
Hi everyone,
Happy owner of a Pegasus Estremo bike with a Rohloff hub, which is giving me trouble with the SF11-NCX-FT-E-LITE 700C TS 300/0 fork (serial number TD01329060). It’s starting to show its age, and I’d like to repair it to extend the life of my beloved bike.
The suspension is gone, and there’s an oil leak from the seals.
Does anyone know how to repair it? Where can I find parts that are about fifteen years old? Or where to find an identical replacement fork? Just to clarify, the Magura HS11 brakes are mounted using Firm Tech, meaning they’re on pivots behind the fork, facing the frame.
Hi, I'd like to know if anyone has done this route recently or has reliable info.
Does the track exist, and most importantly, is there sand (for biking)?
Any info is welcome.
Cheers,
diego ambilobe: mangaoka, manondro, ramena
vohemar sambava: masondrono, tanambao
Hi there,
New to bike touring,
I’d love to start with a section of the Via Rhona to explore and share (route to be decided).
Looking forward to exchanging tips!
I’m landing in Madagascar with a buddy before the end of April 2026. We’re planning to bike around for about twenty days or so. We don’t have a specific goal other than exploring the country and meeting the locals.
Ideally, we’d prefer a loop route starting from Antananarivo with a good chunk of it along the coast. On the bike side, we’re used to riding 6 to 8 hours a day, depending on the needs, encounters, and mood 😉 Any feedback or tips from trips around this length?
A big thank you to Lazarou for all the info you share in this forum!
I'm passionate about Morocco, which I cycled through back in 2009.
Last year, my wife and I explored the High Atlas by tandem. Completely smitten, we're heading back in April (Anti Atlas) and May (High and Middle Atlas), still on our tandem.
Do you have any info on the track between Amezri and Ali Ait Nito? Are the river crossings in the Tessaout still there? It's not easy to navigate with a loaded tandem... especially if the river level is high due to this year's heavy snowmelt!
Thanks in advance for any tips you might have, and best wishes for health in this new year!
Claudio specializes in the route of the Savoie lakes
Here are his travels
Between Bornes, Chartreuse, the Savoie foothills, and Dauphiné
Five lakes: Léman, Annecy, Paladru, Aiguebelette, Bourget, not to mention a few ponds along the way
Plenty of accommodation options: camping, hotels, and more...
A lovely route not far from his place
Rural and quite peaceful
A road cycling route created by Serge B...
First of all... happy New Year! Wishing you great roads in 2017!
I’ve been traveling for a few years now with a high-quality mountain bike, but it’s equipped with hydraulic disc brakes. I live (pedal) with the constant worry of a breakdown (leak, air bubble, heat causing the fluid to...). My bike mechanic tells me it’s impossible to switch them out for V-brakes.
What do you all think? Am I taking a big risk continuing (alone) with these brakes? Thanks in advance for your great tips!
First post here to share a quick recap of our west-to-east bike trip along Algeria’s coast in January 2025.
It was just the two of us—my partner and I—with French passports and not a word of Arabic. No friends or welcoming hosts in the country.
Under those conditions, we’d strongly advise against going.
Our original plan was to follow the coast from Algiers to Tunis. We ended up cycling from Algiers to Béjaia, then took the train from Béjaia to Annaba (with a stop in Constantine), and finally biked to the border.
We were tailed by police the whole way—whether on our bikes, on the train, or even on foot while exploring towns. On top of that, we couldn’t wild camp and were limited to the few state-approved hotels that accept foreigners. Under those circumstances, connecting with locals was especially tough.
With such an omnipresent and intrusive police presence, we’d definitely recommend against this destination for bike touring. A really sad situation that completely cuts you off from the local population...
We’d been warned, we went to check it out, and we weren’t disappointed!
Hi there,
I’m planning the route to cycle from Lille to Nordkapp with my partner.
Duration: 3 months, from May 1st to July 31st, 2026.
In the attached details below, I need to add some "non-riding" days (rest days, basically).
So I’m looking to "shorten" the trip by taking ferries or trains for some stretches. Which areas could I skip?
Thanks in advance for your great tips.
Have a good evening.
https://www.komoot.com/fr-fr/collection/4023980/-lille-cap-nord-1er-mai-au-31-juillet-2026?ref=collection