Pour PYPAT
Merci pour tes photos et les dimensions c'est super sympa....
Tu fais de la fabrication en série ?? Bon courage pour les 5 à faire (il y en a qui vont être contents)
Peux tu nous montrer le détail et les explications de l'avant, j'ai l'impression de voir une fourche de vélo...
Pour LANDAIS
Merci de l'info pour la vent sur E BAY, quand j'ai consulté elle était déjà vendue...dommage car elle semblait intéressante et à un prix raisonnable...
Hello ! J'ai eu la même réflexion que toi et j'ai commencé à faire le calcul pour finalement acheter une remorque pour enfants sur ebay ICI. Je pense que ça revient à moins cher et il y a possibilité de la customiser. J'ai fait une dizaine de bornes avec aujourd'hui sans soucis : c'est un peu lourd, mais je dois pouvoir gagner 2 - 3 kilos dessus...
Laurent
Rien de tel que d'aller au bout du Monde pour rencontrer quelqu'un qui va encore plus loin.
Bonjour à tous les fondus de la remorque artisanale ou pas.
Super-idée le coup du coffre en plastique rigide à poser dans le panier, je n'y aurais jamais pensé !
Mes questions :
Est-ce que ça a pas tendance à faire clong clong avec les cahots de la route ?
Est-ce que ça n'alourdit pas trop l'ensemble (quel poids à vide la caisse s.t.p. ?)
Ca a l'air comme ça parfaitement étanche et pratique, est-ce le cas à l'usage ?
D'avance merci.
j-r_D
PS hors sujet : J'ai la chance de posséder une remorque artisanale en aluminium. J'en parle parce que le débat alu/acier est régulièrement évoqué ici. Même si j'en suis très content, d'une part ça m'a l'air etrêmement compliqué à réaliser et à réparer (je l'ai achetée toute faite). D'autre part le gain de poids n'est pas flagrant car pour obtenir suffisamment de rigidité, il faut mettre beaucoup de matière ce qui limite le gain de poids.
Pour PYPAT
Merci pour tes photos et les dimensions c'est super sympa....
Tu fais de la fabrication en série ?? Bon courage pour les 5 à faire (il y en a qui vont être contents)
Peux tu nous montrer le détail et les explications de l'avant, j'ai l'impression de voir une fourche de vélo...
J'avais besoin de 3 remorques un copain était intéressé par 2 nous avons donc décidé d'en fabriquer 10 au cas où il y aurai des intéressés et pour amortir la plaque de grillage qui fait 1mx2m.
Les détails de la partie av vont suivre je n'est pas eu le temps de fabriquer la nouvelle version(en effet j'ai modifier l'angle de chasse pour améliorer la tenue de route et la partie av n'est plus compatible) une remorque est partie avec cette modif mais oups j'ai oublier de faire la photo a suivre.....
Bonjour à tous les fondus de la remorque artisanale ou pas.
Super-idée le coup du coffre en plastique rigide à poser dans le panier, je n'y aurais jamais pensé !
Mes questions :
Est-ce que ça a pas tendance à faire clong clong avec les cahots de la route ?
Est-ce que ça n'alourdit pas trop l'ensemble (quel poids à vide la caisse s.t.p. ?)
Ca a l'air comme ça parfaitement étanche et pratique, est-ce le cas à l'usage ?
D'avance merci.
j-r_D
Non pas de clong clong avec les cahots de la route la caisse est bien coincée.
Pour le poids 1.6 kg environ pour 12€ ( le sac bob est annoncé à 1.7 kg et 59€! Bon OK c'est pas le même produit).
Cet été vu la pluie rencontré je peu dire que c'est top! il faut mettre un morceau de scotch sur le couvercle pour boucher les trou prévu pur le cadenas et les duvets sont au sec.
Est-ce que ça a pas tendance à faire clong clong avec les cahots de la route ?
Si la caisse est fixées sur le chassis, aucun problème. Idem pour les objets à l'intérieur: s'ils sont bien calés, pas de problèmes.
Est-ce que ça n'alourdit pas trop l'ensemble (quel poids à vide la caisse s.t.p. ?)
Pas plus qu'un sac de bonne qualité.
Ca a l'air comme ça parfaitement étanche et pratique, est-ce le cas à l'usage ?
Parfaitement étanche et pas de risque de déchirure.
L'inconvénient en ce qui concerne ma caisse c'est que je perds de la place vu la forme de la caisse. Les rainures etc... augmentent la rigidité de la caisse mais font perdre de la place alors je pense qu'il faut bien regarder comment est faite la caisse. Pour cette raison de gain de place et pour baisser le centre de gravité de ma remorque, je suis passé au sac étanche mais, en un voyage, suite à des frottements, il est déjà percé !.
J'ai essayé de rescenser ce qui existe concernant les remorques vélo (monoroue) sur le web
http://zefred.ovh.org
Ce qui m'a inspiré pour fabriquer la mienne (tres artisanale comparée à certains projets)
Cette video est geniale ! ...Surtout les parcours utilises; Toujours en descente pour les portions hards. Et puis le cote #sequences en acceleres# ca donne toujours l impression que c est hyper facile !!! Non franchement, c est une belle promo. ...Ils auraient sorti des fringues propres et BCBG a l arriver pour nous rassurer sur la parfaite etancheite des saccoches cela aurait ete encore mieux !
A note quand meme; pas une seule branche acrochee aux filets, rien qui vient taper les sacs au niveau du sol, pas d arret avec une bequille, pas trop de boue qui vient remplir l interieur du grand garde boue, non rien que du bon !!!😎
>> rien qui vient taper les sacs au niveau du sol,
> D'autant plus bizarre au moment des chocs (descente de "marches"). Des sacs chargés "pour de vrai" auraient dus distendre les filets jusqu'à toucher le sol dans certains cas tant ils sont déjà près du sol sans choc.
Quant au système de fixation à clipser en pince c'est pas idiot mais à mon avis une simple goupille sécuriserait l'ensemble.
"Ils ne savaient pas que c'était impossible alors ils l'ont fait" - Mark Twain
Vous aurez aussi remarqué un autre modèle de remorque mono-roue qui est plus ressemblant au modèle de pypat : http://www.youtube.com/watch?v=t6e0Xu1bTbU&feature=related
Le modèle de pypat serait-il aussi résistant ?
des retours d'expérience, pypat ?
L'Aevon est accrochée au tube de selle, celle de Pypat au moyeu arrière ce qui empêchera des demi-tours aussi courts mais dans l'utilisation d'une remorque de voyage on ne passe pas son temps à faire demi-tour 🙂
Sinon on est aussi dans l'éternel débat acier-alu 🙂
Côté prix, je ne sais pas si Pypat les vend, ni à quel prix mais il doit pas y avoir photo vu le prix des Aevon (700 euros pour le "petit" modèle, 800 pour le "grand").
"Ils ne savaient pas que c'était impossible alors ils l'ont fait" - Mark Twain
C'est vraiment génial de voir toutes ces innovations sur les remorques. Celle-là semble vraiment ingénieuse et solide à la fois. Pour un bricoleur ça peut donner pas mal d'idées...
Oui enfin à 235€ port compris on peut se demander si ça vaut le coup de la fabriquer soi-même.
Je crois que là on s'approche de la remorque idéale: en acier (si j'ai bien traduit), monoroue, accrochée au tube de selle et pas au moyeu arrière et en plus à un prix raisonnable.
Un vrai panier aurait été appréciable mais si c'est de l'acier 3 soudures et c'est bon.
Annoncée pour 70kg de charge utile ça me paraît beaucoup mais bon on sera jamais à ce poids là.
"Ils ne savaient pas que c'était impossible alors ils l'ont fait" - Mark Twain
Vous aurez aussi remarqué un autre modèle de remorque mono-roue qui est plus ressemblant au modèle de pypat : http://www.youtube.com/...&feature=related
Le modèle de pypat serait-il aussi résistant ?
des retours d'expérience, pypat ?
Bonsoir,
Je ne pense pas que ma remorque soit moins solide mais le fait de ne pas être suspendue elle sera sûrement moins confortable. La faiblesse pourrai venir du fait que la fixation est sur l'axe de la roue, peut être un peu moins résistant que l'accroche sur la tige de selle:un petit teste en charge, une balade en 2007 ou l'on peu voir les remorques.
Pat
Dans tous les cas il n'y a pas de raisons qu'elle soit moins solide ou confortable qu'une Bob Yak ce qui reste une référence.
La suspension y'a le pour et le contre: confort certes mais source de problème potentiel en plus.
Quant à la fixation à la tige de selle je suppose que tu as déjà ton idée pour le faire quand on voit que tu es capable de fabriquer un trike en moins de 7h... 🙂
Au fait, tu les commercialises quand tes remorques? 🙂
"Ils ne savaient pas que c'était impossible alors ils l'ont fait" - Mark Twain
Bonjour et bravo pour le travail.
Par contre, j'ai eu une remorque 2 roues avec fixation sur le tube de selle et je trouvais que ça déstabilisait le vélo. En effet l'effort est assez mal réparti et la remirque avait tendence à entrainer le vélo latéralement. Actuellement j'ai une Profi à 2 roues avec attache Weber latérale sur l'axe de la roue arrière et c'est beaucoup plus stable. Je ne l'utilise pas pour le voyage mais occasionnellemt pour transporter des objets lourds et encombrants.
En plus avec un système de fixation type Bob tu gagnerais le poids de la barre verticale. Le système latéral Weber n'est pas compatible avec une monoroue.
Bien cordialement.
>> Par contre, j'ai eu une remorque 2 roues avec fixation sur le tube de selle et je trouvais que ça déstabilisait le vélo. En effet l'effort est assez mal réparti et la remorque avait tendance à entrainer le vélo latéralement.
> Une monoroue devrait être beaucoup moins influente latéralement non?
Le point d'appui au sol n'étant plus hors de l'axe du vélo ça ne devrait plus jouer, ou tout au moins être complètement insensible.
"Ils ne savaient pas que c'était impossible alors ils l'ont fait" - Mark Twain
Merci pour le compliment!
Mais comme je le disais un peu plus tard, j'ai abandonné le projet car l'attache à l'aide du cardan était trop légere pour une monoroue...
J'ai ensuite passé du temps sur une remorque à 2 roues qui se comportait bien sur le plat mais qui avait tendance à vouloir me doubler dans les descentes au moindre défaut sur la route...
Etant attiré exclusivement par les bosses, j'ai fini par abdiquer avec l'extrawheel qui a une tenue de route terrible.
Il n'empeche que je me penche toujours sur le probleme quand j'ai envie de me prendre la tete.
Et puis ça fait passer le temps en attendant de voir partir la neige qui continue a tomber...
Cela fait plaisir de voir que d'autres personnes sont dans le même trip et cherchent des solutions ingenieuses pour voyager dans les meilleures conditions à moindre coût
Cela fait 3 ans que je bricole, je pense avoir trouvé la solution qui me convient: une remorque légère, facile a transformer pour prendre le train ou l'avion (les 2 roue se fixent sur le cadre du vélo, le chassis reste fixé avec le sac, et la barre va dans le sac en trois minutes)
Mon expérience parmi d'autres ...
- Premier prototype, copie de la remorque BOB en acier, poids total 11, 5 Kg . Premier voyage (500km) avec un vélo Peugeot type routier (mon neveu a réalisé avec ce vélo le trajet Canada – Argentine en un an)
Avec 25 kg de bagages (dont matériel de camping ) total 37 kg !! J’ai trouvé que cela était fatiguant de tenir le guidon et j’ai cassé plusieurs rayons (dans la Creuse).
- Second proto, j’ai décidé de transformer cette remorque 1 roue en une 2 roues. Très facile lorsque l’on sait souder. Poids de la remorque peu différent environ 12 kg. J’ai changé de vélo ; Vélo course Gitane (+ léger). Je n’ai trouvé que des avantages dans ce choix. Pas de casse de rayon, beaucoup plus de liberté avec le guidon ... j'ai malgré tout des doutes consernant la résistence du cadre
Je me suis fixé comme objectif de diminuer encore le poids. Objectif remorque + sac < 30 kg.
- Troisième attelage : J’ai acheté un VTC CRS2 Giant ; Report qualité /prix excellent. fabrication d’une remorque 2 roues en alu avec du matériel de récup coût total inférieur à 50 €. Base réalisée avec un morceau d’échelle en alu (3 barreaux), acheté dans une casse 2 €, un piquet de tente et 2 roues et une petite plaque d’alu de 5mm (fixation de roues). Le résultat est excellent, en août dernier j’ai fait le trajet Amiens – Bayonne (1300km en 15 jours), je n’ai rencontré aucun problème. Je repart l’été prochain (5 semaine Sofia- Mulhouse par le Danube) je ne ferai aucune modif sur ma remorque 6, 5kg + 20 kg maxi
La bonne idée à retenir, c'est le coup de l'échelle et du piquet de tente
j'espère découvrir prochainement d'autres prototypes !!!
Joli travail en éffet!
Une question que je me pose:
ta deuxieme remorque est fixée sur le tube de selle alors que la derniere est prise sur la roue arriere, cela fait-il une grosse difference de tenue de route?
Je te demande ça parce que c'est avec une attache apres le tube de selle que mon prototype à 2 roues (en photo dans le message précédent) a décidé de s'envoler apres avoir roulé dans un trou (a bonne vitesse tout de meme...)
Avec ton expérience des 2 types d'attache, crois-tu que de me prendre sur la roue arriere éviterait ce genre de séquence frisson?
Sympa 😉
Je roule à 90 % sur le bitume (souvent en très mauvais état) et 10 % les chemins forestiers, pistes et chemins de halage. Pour cette utilisation je pense qu’il n’y a pas photo, les 2 roues sont adaptées. A l’origine, j’avais prévu 2 hauteurs possibles (garde au sol), je n’ai finalement jamais modifié cette hauteur. j’ai testé plusieurs positions avant d’adopter une garde au sol de 10 cm. L’axe de la roue de la remorque est 15 cm plus haut (diamètre de la roue 50 cm) La tenue de route est excellente et la prise au vent minime.
Concernant l’attache sur le tube de selle ou sur l’axe de la roue, je suis persuadé que c’est cette deuxième solution la meilleure. Je me suis aussi posé cette question. Pour limiter le poids, j’ai opté pour le bras le plus court possible(encore 500 gr de moins), cela m’a permis de vérifier que la tenue de route et la stabilité sont bien supérieures.
Ma remorque N°2 était moins stable (trop de liberté) a grande vitesse avec des pneus trop gonflés et un sol accidenté elle pouvait parfois s’envoler légèrement !!!
pas de réels problémes en fait car je ne fait jamais la course.
Mieux qu'sur l'plan ! des test sur le terrain sont plus efficaces que de longs calculs !
Ce n'est pas faux, mais en ce qui me concerne, il faudrait d'abord changer de produit et je ne me sens pas assez motivé pour abandonner une bonne bouteille contre une sereingue...😏!
Je viens de terminer la deuxieme version de ma remorque monoroue : détails ici
Je me suis bien inspirée de celle-ci
Et j'ai rassemblé plein de bonnes idées ici
Après l’avoir tester 3 ans sur plusieurs moyens de transport, je partage cette vidéo d’un emballage vélo. Il est en carton de recyclage et filmé, modulable en…
Hi,
what are the easiest ways to get back from Nordkapp without pedaling—
train, boat, or plane?
Has anyone already done this?
Thanks for sharing your tips!
Hi, does anyone have recent info on the Shikoku pilgrimage? We’re traveling as a pair by bike, and I plan to camp whenever possible because from what I’ve seen, accommodations are pretty expensive, especially for long trips. I’d love any info or tips—thanks in advance! Aichatou
I’m planning to leave Nice for Toulouse around 10/15 and I’m looking for tips / great deals regarding:
- The route: I was thinking of taking Nice - Grasse - Draguignan - Salernes - Cadarache - Cavaillon - Arles, then the Camargue, Sète, and the Canal du Midi to Toulouse. The idea is to avoid high-traffic roads and too many steep climbs. Are there any spots to avoid or must-see stops? Since it’s been a while since I’ve been on the road, I was thinking that sleeping indoors might be preferable. If you have any budget-friendly accommodation suggestions along part of the route, don’t hesitate!
Thanks in advance, and if you’re in the area around that time, we could ride together... Ciao.
Hi,
I need to arrive in Thessaloniki by bike at the end of September and I plan to head to Istanbul along the coast.
Could anyone help me pick the best route? Safety, difficulty.
Thanks in advance.
Marc
Hi everyone! Thanks for welcoming me to the forum :)
I’m preparing for a long trip heading to Nepal, with stops along the way depending on my mood, work needs, and the season. I cycle a lot, but this will be my first big touring adventure. I’d like to camp regularly to keep costs down, so I’ll be riding on all kinds of surfaces: smooth and rough roads, main highways and rocky paths to find my camping spots, flat terrain and the occasional steep slopes.
For my bike model, I’m prioritizing durability, versatility, and repairability. From that perspective, I prefer a steel frame and fork with rim brakes since I’m used to them. I’ve narrowed my choices down to four models:
- The VSF Fahrradmanufaktur T-700 LTD (1400 €): steel frame, aluminum fork, hydraulic rim brakes, 28" wheels, 40mm tires, 36 spokes (2 mm), lightweight rear rack (max 20 kg), no front rack included, smallest gear ratio of 0.72, weight of 13.9 kg.
- The VSF Fahrradmanufaktur TX-400 (2200 €): steel frame and fork, hydraulic rim brakes, 26" wheels, 50mm tires, 36 spokes (2.34 mm), front and rear racks included (40+18 kg), smallest gear ratio of 0.71, weight of 15.9 kg.
- The Genesis Tour de Fer 30 (2150 €): steel frame and fork, mechanical disc brakes, 28" wheels, 36 spokes, 40mm tires, front and rear racks included (27+10 kg), smallest gear ratio of 0.77, weight of 15.9 kg.
- The Rockrider ADTV 900 from Decathlon (1700 €): aluminum frame and fork, mechanical disc brakes, USB port, 28" wheels, 47mm tires, 28 spokes, front and rear racks included (40+20 kg), smallest gear ratio of 0.71, weight of 17.1 kg. This is the successor to the Riverside Touring 900, which was a hit.
I’ve got a few questions:
1/ Should I go for 26" or 28" wheels for my trip? 26" wheels seem better for rough terrain, but 28" wheels feel more comfortable on roads. I’ve also read that 26" tires/tubes are easier to find.
2/ Do you recommend a steel frame and fork over aluminum? I’m guessing a high-quality aluminum frame and fork would be better than a low-quality steel one, right?
3/ Regarding the smallest gear ratio, is 0.71 a good number for a loaded bike in the mountains?
4/ Finally, what do you think of these four models for my project? My heart leans toward the TX-400—it seems to combine the versatility and robustness I’m looking for. But the price difference with the T-700 LTD is making me think twice!
Thanks so much for reading and sharing your thoughts!
17 days, 1,400 km, and 17,500 m of elevation gain cycling in northern Vietnam! 🇻🇳 🚴🇻🇳
From the misty Fansipan to the breathtaking landscapes of the Ha Giang Loop, from remote villages to vibrant markets...
I cycled through the north of the country, getting up close with its people—through mud, heat, endless mountain passes, and unforgettable encounters.
Most importantly, I discovered a Vietnam far different from the usual tourist circuits.
Join me on this adventure through a video that captures these 17 days of travel. :)
If Vietnam calls to you, come ride a stretch with me!
Hi,
can anyone give us some tips on how to get to North Cape from Lyon Gerland?
What’s the best route to join the EuroVelo 7?
How many kilometers is it from Lyon to North Cape via EuroVelo 7?
The best month to leave—we’re thinking early May.
Thanks for any advice!
Looking for a female travel companion for a cycling trip (arriving by plane in Porto Alegre, Brazil, and cycling toward Montevideo, Uruguay, returning by plane to France from Buenos Aires, Argentina) – 1,500 km
Hello everyone!
I’m planning a cycling trip across Brazil, Uruguay, and Argentina, with a departure set for late October, November, or December. I’m looking for a travel companion to share this long-distance adventure with.
Experience:
I already have solid experience in bicycle touring in Georgia, Kazakhstan, and Kyrgyzstan. Currently, I maintain excellent physical condition by cycling an average of 250 km over 3 days per week (4 hours a day at 20 km/h).
The trip & the pace:
Daily pace: Between 50 and 80 km per day, to make steady progress while taking time to explore.
Accommodation: Flexible and authentic. We’ll alternate between wild camping, campsites, Warmshowers, small guesthouses, and budget hotels depending on opportunities and the weather.
Looking forward to reading your message and planning this amazing journey together!
Another long-time dream of Claudio’s: the Petit Mont Cenis pass and the dam at the eponymous lake.
A place where many Italians, including my father, worked in the 1950s–60s.
Faverges → St-Michel-de-Maurienne → Lanslebourg → Petit Mont Cenis → return. 315 km, 3 days. Bivouac at St-Michel-de-M.
Brouter link
Leg One: Faverges → St-Michel-de-Maurienne
Leg Two: St-Michel → Lanslebourg → Mont Cenis Lake → St-Michel
Leg Three: St-Michel → Faverges
And it finally happened in August 2026: in the Maurienne Valley about the famous cycle route known as the V67
🇷🇼 Cycling in Rwanda: 4 episodes, an off-the-beaten-path adventure
After 3 weeks and nearly 1,200 km by bike across Rwanda, I made 4 videos to share this adventure in a different way: the landscapes, the encounters, the villages… but above all, all those incredible scenes of everyday life.
The 4 episodes are available here:
👉 https://www.youtube.com/playlist?list=PLGnfbxjccWAg
The 4th episode focuses on rural Rwandan life: simple, authentic, and sometimes surprising scenes that you only truly discover when you take the time to travel by bike.
If you have a few minutes, let yourself be transported to Rwanda…
Hi,
We bought the MSR bike tent model (2-person + large awning that can fit 2 bikes) back in 2005. It’s served us really well, especially during a year-long trip in Africa. Now, one of the poles is broken, and we’d love to replace it since that’s the only issue with the tent—we still love it! The poles are 9.35 mm in diameter, with 8 sections of 49 cm and 2 sections of 28 cm. Total length when assembled: 416 cm. Actually, two large sections are broken: one straight and one curved. It’s a pain to find replacements since this model is no longer sold anywhere.
Would anyone have this model lying around unused and be willing to sell me a pole?
Hi everyone,
In early April, I’m redoing the Vélo Francette (La Rochelle to Ouistreham), and then I’d like to cycle along the Cotentin Peninsula (which I don’t know at all), follow the coast up to Cherbourg, and then head back down to at least Saint-Malo. I’d love to know if it’s pleasant for cycling—are the roads nice? Not too windy? What are the must-see spots? Any great campsites? All your tips and advice are more than welcome, and I thank you in advance.
After testing it for three years across various modes of transport, I’m sharing this video of a bike packing case. It’s made from recycled cardboard and shrink-wrapped, with adjustable thickness and added bubble wrap depending on the level of protection you want.
Installing spacers at the fork and chainstays makes the packaging compact. With the fifteen-odd euros for shrink-wrapping at the airport, this case travels really well.
https://youtu.be/_GDJi-GqmkM
- Low bulk (1.10m x 0.70m x 0.25m for a large frame), it fits vertically in train luggage compartments and the total dimensions (x+y+z) don’t exceed 2.40m.
- Two carrying solutions for public transport and easy handling by airport staff (no more tears in the cardboard from openings).
- Discreet packaging when dealing with bus drivers and train conductors, as it looks like an ordinary parcel.
- No need to return to the starting point to retrieve the case from your outbound trip, which you’d otherwise have to store somewhere, or deal with a bulky cover to pack in your panniers.
- You can still check tire pressure through the plastic film without damaging the packaging too much.
Drawbacks: Around 3 hours for this lengthy and meticulous process—removing the wheels, pedals, handlebars, and derailleur without misaligning them, then securing all components to the frame.
If you get a chance to test it, send me your feedback for future improvements.
I just took a trip in Tunisia from Tozeur to Douz, skirting Chott el Jerid to the south. I’m back with the urge to keep going further south via the 4x4 tracks to connect Douz to Ksar Ghilane. Has anyone driven this route recently or explored southern Tunisia?
Thanks for your tips!
fix
😎Fellow traveling cyclists or not, all of you who love travel, the pleasure of physical effort, nature, beautiful machines, people with true passions they seek to fulfill, and who also enjoy reading great literature about all this—the *200* magazine is for you just as it is for me. I should mention I have no financial or other interest in this (in an era where we accuse our politicians of all sorts of vile interests, I prefer to take precautions). I’ve been subscribed since the beginning, and every three months, I get my 130 pages of dreams (the magazine just went from 110 to 130 pages).
It covers everything from the trans-America route to the TCR (Trans Continental Race) from Belgium to a small town in Turkey, with mind-blowing averages—4,000 km and 80,000 m of elevation gain in 8 days and 15 hours for the winner. Let that sink in, and all of it without assistance—accepting a patch could penalize you. There’s also a story about crossing Iran, encountering one of the world’s most welcoming populations, following in the footsteps of Nicolas Bouvier, as well as retirees leisurely traversing France. The common thread in all these stories? Beautiful writing. Take, for example, a stunning article: *"Passengers of the Cold: From Edinburgh to Thurso, at the very north of Scotland, 550 km of moors, coasts, and icy wind. In Thurso, the road ends at a quay, facing the Orkney Islands. We wanted a November trip, off-season. We wanted to surprise winter. Just before the snow."* A sublime piece on the experience of facing adversity and the chance encounters along the road and in the elements.
Before I embarked on my own bike trips, I dreamed a lot about them—from the Atacama to the Gobi, along the Mekong, and not forgetting France. And now, these 130 pages every quarter keep those dreamy vibes alive through stories written in the most beautiful prose.
I’ll stop here because it might sound like I’m advertising, but if you don’t know *200*, I invite you to discover it. It’ll give you wings for the most incredible challenges or simply reinforce your desire for slow rides with your eyes open to others and nature.
A little news to wrap up: Axel Carion and a friend just broke the record for crossing South America from Colombia to Ushuaia in 59 days. On its own, that doesn’t mean much, but I can’t help it—it makes me dream. You should see how he talks about it, the flashes of that wild nature he’s stored away: a snowstorm at Paso Jama and the surreal sight of the suddenly snow-covered Licancabur!
Luc
PS: The magazine is called *200* because a day’s ride starts at 200 km—well, I’ve never done a ride like that since my longest was 167 km (with 18 kg of luggage, mind you), but why not one day? The magazine will explain how to tackle your first 200, and then the question in conclusion: when will you do your first 300?😏
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires.
I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time).
I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral.
I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough?
And one last question: white gas stove or can I get by with my gas stove?
I'm developing a free and open-source web app for planning walking and cycling trips (and even car trips). You can create a route by clicking directly on the map to add waypoints, and it can consist of multiple stages. The app provides tools to edit the stages and the overall route, and to display useful information (distances, altitudes, and elevation changes). A relief profile can be shown as a graph for a specific stage or the entire route.
Once the route is ready, it can be exported as a GPX file, which can then be used with a GPS or a mobile navigation app.
The app is built in JavaScript and runs entirely in the web browser. It uses the Leaflet library and several OpenStreetMap-based services. Initially developed for my personal needs (I enjoy hiking and cycle touring), I’d be happy to share it with anyone who might find it useful. It’s free to use, doesn’t require an account, and the source code is available.
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed
story being posted online soon
1100 km in 11 days
beautiful and varied regions
Hello,
We’d like to go on a 3- to 4-month bike trip starting in December, crossing from Assam (northeast India) to New Delhi via Nepal.
Are there routes with light traffic along the Brahmaputra and through Nepal?
We’re also looking for any info on accommodations, wild camping, local interactions, etc.
Thanks,
Michel
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August!
Virginie
Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
Hi there, I’m planning a cross-Canada bike trip, and I’ve got a question that might seem silly, but could someone tell me how to pack a bike (in a box, with a fragile sticker... I don’t know) for a flight? Thanks in advance!
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam.
My question is about getting back to Nantes.
Do any of you know what the best return option might be? I’d love to hear about your experiences.
I saw that FlixBus doesn’t take bikes.
By train, I think it’s possible but would involve multiple local trains.
We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance!
Have a great evening
I’ve gotten used to crossing Europe by bus to return by bike.
It was really convenient to take the bike without having to disassemble it.
But FlixBus no longer accepts bikes...
What alternatives do you know about?
Thanks.
Hi there,
I’m planning to ride the Dutch section of the EuroVelo 19, from Maastricht to Rotterdam.
Since it’s too complicated to bring my bike on the train, I’m looking to rent one locally.
I’d love any tips or bike rental shop recommendations—I’m struggling to find options even in Rotterdam.
The plan is to rent in Rotterdam, take the train to Maastricht with the bike, then cycle back to Rotterdam.
Thanks in advance for any advice or suggestions!
Nath