bonjour pascal pour avoir ces modéles je préfère le duo qui est plus rigide et aussi costaud mais le tara est mythique et que les mythes ont la vie dure meme si on leurs trouvent des trés bons remplaçants donc duo si ta fourche est pourvu d oeillets car ce modèle équipe mon vélo et aucun problèmes . cordialement manu
J'ai le duo sur mon Surly LHT : RAS, c'est du costaud. Je l'avais choisi pour sa discrétion, et il va très bien avec le Surly dont la fourche comporte des pas de vis de chaque côté des fourreaux, et un espacement entre les oeillets à mi-fourche et en bas de fourche compatible avec le duo.
Avant, sur un autre vélo j'avais un modèle Zéfal similaire au tara (en forme du moins, mais moins costaud), et j'avoue que je n'ai pas vu de différence autre qu'esthétique entre ces deux structures de PB avant. Le Tara permet de tirer sur le vélo grâce à la partie qui 'enjambe' la roue, mais ça n'est valable que si on est deux.
Par contre si tu envisages de changer de vélo plus tard, le tara s'adapte à tous PB, alors que le Duo nécessite comme décrit plus haut une certaine géométrie et un double perçage sur chaque fourreau.
Bonjour
J'utilise le Tara depuis près de 20 ans et je n'ai jamais connu le moindre problème que ce soit sur route ou sur piste.... C'est du costaud....
Patrick
Merci les gars !!
J'ai eu une proposition par MP pour un duo en occas , j'ai le vélo neuf donc je ne sais pas
si je part sur du neuf ou pas !!
Le duo me semble bien et suffisamment discret pour le quotidien , un p'tit coup de frein
filet bleu comme conseillé sur ce forum lors du montage du Surly LHT , et il restera a demeure 😉
Donc DUO 🙂
Merkiiiiiiiiiii...
bonjour pascal bon choix pour la discrétion et la solidité et petite astuce sur mes montages de visses j applique toujours du silicone transparent cela évite la rouille quant elles sont en acier cdlt manu
salut je mets du frein filet et une fois vissé , je rajoute le silicone sur la tete de visse et au bout ainsi pas de rouille et démontage sans aucune difficulté voili voilou et ca marhe bien (astuce d un mécanicien ) a plus et bon pedalage manu
Salut Pascal 😉 et les autres aussi heingue
J'ai voulu monter un Duo cette aprém .
Je rencontre un problème , a cause de l'attache rapide de la roue "XT" .Je peux le monter , mais
il me faudra dévisser en bas la vis du Duo pour défaire la roue 😊 😊 !!
Pour tu me dire quel montage a tu fait et a quel trou en haut a tu mis la vis "3" possible .
Si tu a une photo , alors là , c'est Byzance 🙂
Voici les photos de mon montage, j'ai aussi un moyeu et une attache rapide XT (actuellement moyeu dynamo, mais avant moyeu standard) : je n'ai pas de souci pour démonter la roue.
merci beaucoup Pascal , tu a pas une photo de la roue complete "de coté' avec le Duo .
La j'ai un peut de mal , j'ai comme l'impression que j'ai pas les même bas de fourches
l'endroit ou l'on enclenche "insert" la roue .
Merci
Voila ce que j'ai sur mon disque dur. Si tu n'y vois pas ce que tu veux voir, j'en referai.
Sinon, pour la structure exacte du bas de fourche, il y a sur le mien 2 oeillets : 1 juste au-dessus de ''l'encoche'' où se met l'axe de la roue (visible sur les photos précédentes n° 1, 4 et 5 sous différents angles) et sur lequel j'ai fixé le Duo, et un deuxième un peu en arrière (sur la photo 5 la vis de fixation du garde boue qui y est enfilée est un peu rouillée).
Mille merci Pascal 😉
J'utiliser pas les bon emplacement , pour le bas c'est ceux du GB que j'ai viré du reste
Pour le haut j'utilisé le trou de gauche 😛
Bon je suis qd méme dans la M....car j'ai cassé la vis du GB "la téte" donc je ne suis pas sortie
de l'auberge ,
ça m'est déjà arrivé de caser une tête de vis : mon vélociste a pu extraire la 'tige' restée dans le pas de vis sans abimer celui-ci. Par contre pour la deuxième fois j'ai essayé de résoudre le problème avec une perceuse : pas un bon choix : le pas de vis est inutilisable, il va falloir que je refasse tarauder l'oeillet.
Tu sais peut-être comment t'y prendre (et dans ce cas ne tiens pas compte de la suite de ma phrase), mais vu ce qui m'est arrivé, et au cas où, consulte un ''spécialiste'' pour extraire la vis (un vélociste par exemple).
C'est ce que je vais faire .😉
j'ai fais une encoche a la scie a métaux , mais c'est tout petit pas moyen , sa casse !!
Il ne me reste plus qu'a démonter et emmener la fourche chez le vélociste .
bonjour à vous ,
Sans vouloir m'incruster dans votre discussion , Si vous permettez que je vous donne une solution , au sujet de la vis tête cassé, le moyen d'y remédier est de re-percer un à diamètre un poil plus grand et de mettre une vis avec un écrou frein derrière...ou du frein filet sur un écrou ordinaire pour éviter qu'il ne ce dévisse en voyageant..
on peut arriver aussi à faire sauter le filet en perçant au diamètre inférieur et puis avec un jeu de tarot , tarauder, ce qui auras pour effet de faire partir les résidus du filet de la vis..(pas évident à bien expliqué)mais facile à faire !!!
bonne réparation et bon voyage ...Rv..
bon voila tu sais pourquoi une clef dynamométrique est utile!
pour eviter la rouille sur les vis, il y a les vis inox A2 ( atmosphere humide)ou A4 ( atmosphére Marine).
bon courage
François
Bonjour,
Mon premier métier était ajusteur mécanicien, autant dire que j'ai fait l'extraction de vis cassée des dizaines, voir plus, de fois dans ma vie.
Ce n'est pas si simple et demande un soin très particulier:
Limer la vis cassée, si elle dépasse pour rendre le bout plat
Pointer (avec un pointeau à faible angle) bien au centre c'est très important
Percer avec le plus petit forêt possible, en tournant très vite. Une perceuse sur batterie n'est pas le top.
Déboucher surtout si le trou est borgne pour pouvoir mettre du dégrippant par l'arrière.
Se recentrer (par l'angle de la perceuse dans les premiers mm.) si le trou est dévié, et avec une lime aiguille (si le trou est fait, pas évident)
Attendre si on a la chance d'avoir pu mettre du dégrippant par l'arrière
Agrandir le trou jusqu'à ce que l'extracteur entre, mais pas trop non plus pour ne pas abimer les filets du trou femelle avec l'extracteur
Essayer de dévisser avec l'extracteur et un tourne à gauche, pas une clé plate, pour rester bien droit.
Si la vis ne sort pas il reste le retaraudage, opération encore plus délicate, on a une chance sur trois de casser le taraud, et là c'est terminé, sauf désintégrateur électrique???
Pour retarauder, percer le trou très très bien centré au diamètre de la vis moins le pas. Par exemple pour une vis de 6 mm. le pas est de 1 mm., il faudra percer à 5 mm.
Engager le taraud, si le trou est centré, peut être gagnant mais pas garanti à 100/100
Dans certains cas, par exemple mauvais centrage du trou, on peut passer à la taille standard supérieure (pas la taille réparation ou on ne trouve pas de pièces), sous réserve qu'il y ait de la camelote à cet endroit.
Exemple pour une vis de 6 cassée on passera à une vis de 8 en perçant à 6.75 (le diamètre de la vis moins le pas de 1.25)
Bref pour une vis inférieure à 8, ce n'est jamais gagné d'avance
@Cyclo30, vu sous cette angle , je vais pas me risqué 😛 Merci pour la méthode , cela servira
a d'autre internaute .
@François .Le vélociste sent est occupé , j'ai donc monter le bazar mais comme un gland , j'ai
encore cassé une tète de boulon , celui du centre de la fourche , du coup je suis bon pour y retourné 😉... "J'aime l'entreprise" 😏 !!
Sinon p'tit roulage avec m'dame Samedi puis aujourd'hui , j'en suis bien content, roule bien
plus qu'a trouver le matos de Rando , tente et compagnie !!
Voici une tof
Bonsoir Jules,
merci pour ta procédure qui est très très explicite...
pour moi , pas de pb , suis un manuel et de métier tuyauteur , et chaudronnier soudeur pour finir..la bricole ne me dérange pas...
sur mon Vtt , j'ai tout fait moi même , porte bagages avant avec portes bouteilles et PB arrière..
les vis à extraire ne sont pour moi pas un Pb....
Je pense que le collègue du 34 pourras enfin avoir une bonne gamma d'intervention , avec même les outils et clé à employer....merci de lui en faire part et bonne ballades à toi...cordialement...hervé...
Bonsoir Pascal,
Merci à toi de m'avoir répondu pour savoir ou tu en était avec la vis cassé...
Tout est bien qui finit bien , tu vas être au top ; je vois sur la photo que tu as un beau vélo bien équipé...
tu as recasés , fait attention au serrage , tu doit avoir la main peut-être un peu lourde en serrant trop fort...
je te souhaite une bonne remise en état de ta vis...et bonne roulade à vélo...Cordialement...Hervé...
I’d been watching this ultra-light travel movement or trend for a while.
So I gave it a try—goodbye to the 5 panniers and rear racks.
A 15L saddle bag for clothes and a stove cookset.
Two cages on the fork blades: 2x5L—mattress on one side, tent on the other.
A 5L frame bag for miscellaneous items: battery, camera, small bits and pieces.
And one on the handlebar for the sleeping bag.
I tested it this summer on a crossing from Valence to Perpignan via the Massif Central.
My conclusions:
The obvious advantage is the reduced weight. In total, I had 12 kg on the bike, which makes climbing in the mountains much easier.
Another benefit I hadn’t considered is the significantly lower wind resistance compared to a traditional setup—you really feel it when the wind’s against you.
Of course, it’s not all perfect...
For example, it’s impossible to carry a food stock. You buy just enough before each meal or go to a restaurant!
You also have to accept a more spartan comfort level at stops.
In conclusion, I think for summer trips in regions where resupplying is easy, it’s an interesting option—especially if there’s significant elevation gain.
On the other hand, it doesn’t allow for enough autonomy, so some trips are off the table.
On the bike side, I swapped my Shimano 11/34 cassette for an 11/40. Even though Shimano doesn’t recommend it with a 105 derailleur and a 46/30 double chainring, it works really well.
The only limit is avoiding the 46/40 gear ratio.
Hi,
what are the easiest ways to get back from Nordkapp without pedaling—
train, boat, or plane?
Has anyone already done this?
Thanks for sharing your tips!
Hi, does anyone have recent info on the Shikoku pilgrimage? We’re traveling as a pair by bike, and I plan to camp whenever possible because from what I’ve seen, accommodations are pretty expensive, especially for long trips. I’d love any info or tips—thanks in advance! Aichatou
I’m planning to leave Nice for Toulouse around 10/15 and I’m looking for tips / great deals regarding:
- The route: I was thinking of taking Nice - Grasse - Draguignan - Salernes - Cadarache - Cavaillon - Arles, then the Camargue, Sète, and the Canal du Midi to Toulouse. The idea is to avoid high-traffic roads and too many steep climbs. Are there any spots to avoid or must-see stops? Since it’s been a while since I’ve been on the road, I was thinking that sleeping indoors might be preferable. If you have any budget-friendly accommodation suggestions along part of the route, don’t hesitate!
Thanks in advance, and if you’re in the area around that time, we could ride together... Ciao.
Hi,
I need to arrive in Thessaloniki by bike at the end of September and I plan to head to Istanbul along the coast.
Could anyone help me pick the best route? Safety, difficulty.
Thanks in advance.
Marc
Hi everyone! Thanks for welcoming me to the forum :)
I’m preparing for a long trip heading to Nepal, with stops along the way depending on my mood, work needs, and the season. I cycle a lot, but this will be my first big touring adventure. I’d like to camp regularly to keep costs down, so I’ll be riding on all kinds of surfaces: smooth and rough roads, main highways and rocky paths to find my camping spots, flat terrain and the occasional steep slopes.
For my bike model, I’m prioritizing durability, versatility, and repairability. From that perspective, I prefer a steel frame and fork with rim brakes since I’m used to them. I’ve narrowed my choices down to four models:
- The VSF Fahrradmanufaktur T-700 LTD (1400 €): steel frame, aluminum fork, hydraulic rim brakes, 28" wheels, 40mm tires, 36 spokes (2 mm), lightweight rear rack (max 20 kg), no front rack included, smallest gear ratio of 0.72, weight of 13.9 kg.
- The VSF Fahrradmanufaktur TX-400 (2200 €): steel frame and fork, hydraulic rim brakes, 26" wheels, 50mm tires, 36 spokes (2.34 mm), front and rear racks included (40+18 kg), smallest gear ratio of 0.71, weight of 15.9 kg.
- The Genesis Tour de Fer 30 (2150 €): steel frame and fork, mechanical disc brakes, 28" wheels, 36 spokes, 40mm tires, front and rear racks included (27+10 kg), smallest gear ratio of 0.77, weight of 15.9 kg.
- The Rockrider ADTV 900 from Decathlon (1700 €): aluminum frame and fork, mechanical disc brakes, USB port, 28" wheels, 47mm tires, 28 spokes, front and rear racks included (40+20 kg), smallest gear ratio of 0.71, weight of 17.1 kg. This is the successor to the Riverside Touring 900, which was a hit.
I’ve got a few questions:
1/ Should I go for 26" or 28" wheels for my trip? 26" wheels seem better for rough terrain, but 28" wheels feel more comfortable on roads. I’ve also read that 26" tires/tubes are easier to find.
2/ Do you recommend a steel frame and fork over aluminum? I’m guessing a high-quality aluminum frame and fork would be better than a low-quality steel one, right?
3/ Regarding the smallest gear ratio, is 0.71 a good number for a loaded bike in the mountains?
4/ Finally, what do you think of these four models for my project? My heart leans toward the TX-400—it seems to combine the versatility and robustness I’m looking for. But the price difference with the T-700 LTD is making me think twice!
Thanks so much for reading and sharing your thoughts!
17 days, 1,400 km, and 17,500 m of elevation gain cycling in northern Vietnam! 🇻🇳 🚴🇻🇳
From the misty Fansipan to the breathtaking landscapes of the Ha Giang Loop, from remote villages to vibrant markets...
I cycled through the north of the country, getting up close with its people—through mud, heat, endless mountain passes, and unforgettable encounters.
Most importantly, I discovered a Vietnam far different from the usual tourist circuits.
Join me on this adventure through a video that captures these 17 days of travel. :)
If Vietnam calls to you, come ride a stretch with me!
Hi,
can anyone give us some tips on how to get to North Cape from Lyon Gerland?
What’s the best route to join the EuroVelo 7?
How many kilometers is it from Lyon to North Cape via EuroVelo 7?
The best month to leave—we’re thinking early May.
Thanks for any advice!
Looking for a female travel companion for a cycling trip (arriving by plane in Porto Alegre, Brazil, and cycling toward Montevideo, Uruguay, returning by plane to France from Buenos Aires, Argentina) – 1,500 km
Hello everyone!
I’m planning a cycling trip across Brazil, Uruguay, and Argentina, with a departure set for late October, November, or December. I’m looking for a travel companion to share this long-distance adventure with.
Experience:
I already have solid experience in bicycle touring in Georgia, Kazakhstan, and Kyrgyzstan. Currently, I maintain excellent physical condition by cycling an average of 250 km over 3 days per week (4 hours a day at 20 km/h).
The trip & the pace:
Daily pace: Between 50 and 80 km per day, to make steady progress while taking time to explore.
Accommodation: Flexible and authentic. We’ll alternate between wild camping, campsites, Warmshowers, small guesthouses, and budget hotels depending on opportunities and the weather.
Looking forward to reading your message and planning this amazing journey together!
Another long-time dream of Claudio’s: the Petit Mont Cenis pass and the dam at the eponymous lake.
A place where many Italians, including my father, worked in the 1950s–60s.
Faverges → St-Michel-de-Maurienne → Lanslebourg → Petit Mont Cenis → return. 315 km, 3 days. Bivouac at St-Michel-de-M.
Brouter link
Leg One: Faverges → St-Michel-de-Maurienne
Leg Two: St-Michel → Lanslebourg → Mont Cenis Lake → St-Michel
Leg Three: St-Michel → Faverges
And it finally happened in August 2026: in the Maurienne Valley about the famous cycle route known as the V67
🇷🇼 Cycling in Rwanda: 4 episodes, an off-the-beaten-path adventure
After 3 weeks and nearly 1,200 km by bike across Rwanda, I made 4 videos to share this adventure in a different way: the landscapes, the encounters, the villages… but above all, all those incredible scenes of everyday life.
The 4 episodes are available here:
👉 https://www.youtube.com/playlist?list=PLGnfbxjccWAg
The 4th episode focuses on rural Rwandan life: simple, authentic, and sometimes surprising scenes that you only truly discover when you take the time to travel by bike.
If you have a few minutes, let yourself be transported to Rwanda…
Hi,
We bought the MSR bike tent model (2-person + large awning that can fit 2 bikes) back in 2005. It’s served us really well, especially during a year-long trip in Africa. Now, one of the poles is broken, and we’d love to replace it since that’s the only issue with the tent—we still love it! The poles are 9.35 mm in diameter, with 8 sections of 49 cm and 2 sections of 28 cm. Total length when assembled: 416 cm. Actually, two large sections are broken: one straight and one curved. It’s a pain to find replacements since this model is no longer sold anywhere.
Would anyone have this model lying around unused and be willing to sell me a pole?
Hi everyone,
In early April, I’m redoing the Vélo Francette (La Rochelle to Ouistreham), and then I’d like to cycle along the Cotentin Peninsula (which I don’t know at all), follow the coast up to Cherbourg, and then head back down to at least Saint-Malo. I’d love to know if it’s pleasant for cycling—are the roads nice? Not too windy? What are the must-see spots? Any great campsites? All your tips and advice are more than welcome, and I thank you in advance.
After testing it for three years across various modes of transport, I’m sharing this video of a bike packing case. It’s made from recycled cardboard and shrink-wrapped, with adjustable thickness and added bubble wrap depending on the level of protection you want.
Installing spacers at the fork and chainstays makes the packaging compact. With the fifteen-odd euros for shrink-wrapping at the airport, this case travels really well.
https://youtu.be/_GDJi-GqmkM
- Low bulk (1.10m x 0.70m x 0.25m for a large frame), it fits vertically in train luggage compartments and the total dimensions (x+y+z) don’t exceed 2.40m.
- Two carrying solutions for public transport and easy handling by airport staff (no more tears in the cardboard from openings).
- Discreet packaging when dealing with bus drivers and train conductors, as it looks like an ordinary parcel.
- No need to return to the starting point to retrieve the case from your outbound trip, which you’d otherwise have to store somewhere, or deal with a bulky cover to pack in your panniers.
- You can still check tire pressure through the plastic film without damaging the packaging too much.
Drawbacks: Around 3 hours for this lengthy and meticulous process—removing the wheels, pedals, handlebars, and derailleur without misaligning them, then securing all components to the frame.
If you get a chance to test it, send me your feedback for future improvements.
I just took a trip in Tunisia from Tozeur to Douz, skirting Chott el Jerid to the south. I’m back with the urge to keep going further south via the 4x4 tracks to connect Douz to Ksar Ghilane. Has anyone driven this route recently or explored southern Tunisia?
Thanks for your tips!
fix
😎Fellow traveling cyclists or not, all of you who love travel, the pleasure of physical effort, nature, beautiful machines, people with true passions they seek to fulfill, and who also enjoy reading great literature about all this—the *200* magazine is for you just as it is for me. I should mention I have no financial or other interest in this (in an era where we accuse our politicians of all sorts of vile interests, I prefer to take precautions). I’ve been subscribed since the beginning, and every three months, I get my 130 pages of dreams (the magazine just went from 110 to 130 pages).
It covers everything from the trans-America route to the TCR (Trans Continental Race) from Belgium to a small town in Turkey, with mind-blowing averages—4,000 km and 80,000 m of elevation gain in 8 days and 15 hours for the winner. Let that sink in, and all of it without assistance—accepting a patch could penalize you. There’s also a story about crossing Iran, encountering one of the world’s most welcoming populations, following in the footsteps of Nicolas Bouvier, as well as retirees leisurely traversing France. The common thread in all these stories? Beautiful writing. Take, for example, a stunning article: *"Passengers of the Cold: From Edinburgh to Thurso, at the very north of Scotland, 550 km of moors, coasts, and icy wind. In Thurso, the road ends at a quay, facing the Orkney Islands. We wanted a November trip, off-season. We wanted to surprise winter. Just before the snow."* A sublime piece on the experience of facing adversity and the chance encounters along the road and in the elements.
Before I embarked on my own bike trips, I dreamed a lot about them—from the Atacama to the Gobi, along the Mekong, and not forgetting France. And now, these 130 pages every quarter keep those dreamy vibes alive through stories written in the most beautiful prose.
I’ll stop here because it might sound like I’m advertising, but if you don’t know *200*, I invite you to discover it. It’ll give you wings for the most incredible challenges or simply reinforce your desire for slow rides with your eyes open to others and nature.
A little news to wrap up: Axel Carion and a friend just broke the record for crossing South America from Colombia to Ushuaia in 59 days. On its own, that doesn’t mean much, but I can’t help it—it makes me dream. You should see how he talks about it, the flashes of that wild nature he’s stored away: a snowstorm at Paso Jama and the surreal sight of the suddenly snow-covered Licancabur!
Luc
PS: The magazine is called *200* because a day’s ride starts at 200 km—well, I’ve never done a ride like that since my longest was 167 km (with 18 kg of luggage, mind you), but why not one day? The magazine will explain how to tackle your first 200, and then the question in conclusion: when will you do your first 300?😏
I’ve got my flight ticket sorted—departing in mid-November and returning in mid-March. I’ll arrive in Santiago and leave from Buenos Aires.
I’ve already been to southern Argentina, specifically Torres del Paine National Park, and I’d love to go back to do the full W trek (I only did the shorter version last time).
I also want to do some hiking and maybe even tackle a summit. I climb and occasionally do some mountaineering, so I’ll definitely be going with a guide.
I plan to start around Temuco in Chile, with the idea of heading toward the lakes, then taking the Carretera Austral.
I’m not sure if I’ll go all the way to Ushuaia—it’s supposed to not be *that* worth it, except for the bragging rights of saying you’ve been to the end of the world.
I saw there are lakes in Argentina too.
I don’t have a precise itinerary, but what I’d love is, once I reach the southernmost point of my trip, to take a mini-cruise to see some wildlife. Any tips for that?
What kind of sleeping bag did you take? Is a 0°C (32°F) one enough?
And one last question: white gas stove or can I get by with my gas stove?
I'm developing a free and open-source web app for planning walking and cycling trips (and even car trips). You can create a route by clicking directly on the map to add waypoints, and it can consist of multiple stages. The app provides tools to edit the stages and the overall route, and to display useful information (distances, altitudes, and elevation changes). A relief profile can be shown as a graph for a specific stage or the entire route.
Once the route is ready, it can be exported as a GPX file, which can then be used with a GPS or a mobile navigation app.
The app is built in JavaScript and runs entirely in the web browser. It uses the Leaflet library and several OpenStreetMap-based services. Initially developed for my personal needs (I enjoy hiking and cycle touring), I’d be happy to share it with anyone who might find it useful. It’s free to use, doesn’t require an account, and the source code is available.
hello fellow cycling enthusiasts
here’s a travel journal of the cycling tour through the Rhône-Alpes Auvergne region by Claudio
zouli
it was the plan
http://cbandiera.free.fr/parcours/auvergne-Ralpes/
the trip was completed
story being posted online soon
1100 km in 11 days
beautiful and varied regions
Hello,
We’d like to go on a 3- to 4-month bike trip starting in December, crossing from Assam (northeast India) to New Delhi via Nepal.
Are there routes with light traffic along the Brahmaputra and through Nepal?
We’re also looking for any info on accommodations, wild camping, local interactions, etc.
Thanks,
Michel
I’m planning to cycle from Morlaix to Brest (via Roscoff and the V45 coastal route). We’ll start riding on August 16th for 13 days (with stops for island visits, surfing, etc.). Is there a lot of traffic at this time of year? I’ve got two kids, 11 and 13, and we don’t like riding in the middle of cars (we’ve already done the Vélomaritime—Caen to Cherbourg—the Loire route from Orléans to Saumur, the Vélodyssée from Nantes to Royans, and the canals like the Nivernais and Bourgogne, where there were plenty of bike-only lanes, which isn’t the case on this route).
Thanks for your help if you’ve already done this route in late August!
Virginie
Hi there,
I’ve been road cycling for several years, and I’m about to switch to gravel in the next few days—I’m waiting for my bike, which should arrive this week.
I’m planning a bikepacking trip in a few weeks along the Véloroute V81, also known as the Vélosud, from Biarritz to Le Barcarès.
Has anyone here already done this route? Any info is welcome, whether it’s about the route itself, gear, or accommodation. I’ll prioritize staying with locals as much as possible. On that note, I just signed up for the brand-new site *Guidon et Couette* ((www.guidon-et-couette.fr)), which offers free accommodation between cyclists across the country, but there’s almost no one listed along my route!
Thanks in advance.
Laurent.
Hi there, I’m planning a cross-Canada bike trip, and I’ve got a question that might seem silly, but could someone tell me how to pack a bike (in a box, with a fragile sticker... I don’t know) for a flight? Thanks in advance!
This summer, we’re planning to cycle along the EV 19 that follows the Meuse River from Langres all the way to Rotterdam.
My question is about getting back to Nantes.
Do any of you know what the best return option might be? I’d love to hear about your experiences.
I saw that FlixBus doesn’t take bikes.
By train, I think it’s possible but would involve multiple local trains.
We were also wondering if there’s a boat from Rotterdam to Saint-Nazaire that could take passengers with bikes.
Any tips or experiences you can share would be really helpful—thanks in advance!
Have a great evening
I’ve gotten used to crossing Europe by bus to return by bike.
It was really convenient to take the bike without having to disassemble it.
But FlixBus no longer accepts bikes...
What alternatives do you know about?
Thanks.